On Tue, Sep 02, 2008 at 12:37:56PM -0700, David Brownell wrote:
> Same way it does now ...
>
> What's BROKEN with the current scheme is that the driver
> model tree looks something like
>
> /sys/devices/platform/omap_i2c.X/X-00{N0,N1,N2,N3}
> /sys/devices/platform/{twl-gpio,twl-rtc,twl-foo,...}
>
> That is, these devices are in the wrong place. Now, I don't
> really care much if they're all parented by the N0 node;
> that's basically just a strange artifact of that chip. All
> that I suggested was making sure those platform devices
> are properly parented: by N0/N1/whatever.
Agreed... it sure looks odd.
> Pass it through twl4030 platform data. It's all board-specific,
> and if you don't pass platform data for e.g. vibrator or LEDs
> then you'd know this board doesn't have that hardware ... so
> don't create those platform devices (even if the driver does
> happen to be configured into this multi-board kernel).
got it.
> static int twl4030_probe(struct i2c_client *c, const struct i2c_device_id *id)
> {
> struct twl4030_core_platform_data *pdata = c->platform_data;
> struct platform_device *pdev;
> int status;
>
> ...
> if (have_twl_rtc_driver() && pdata->rtc_data) {
> pdev = platform_device_alloc("twl4030_rtc", -1);
> ... nullcheck ...
> status = platform_add_data(pdev, pdata->rtc_data,
> sizeof(*pdata->rtc_data));
> ... status check ...
> status = platform_device_add_resources(pdev, ... the irq ... );
> ... status_check ...
> pdev->dev.parent = &c->dev;
> status = platform_device_add(pdev);
> ... status check ...
> }
> ... etc
> }
>
> Or I suppose you could statically allocate the device data; not
> particularly encouraged where pdev->dev.parent is non-null though.
hmm... that looks good. Gotta dig more into the platform_driver stuff.
Thanks for the point.
> > One thing we might say, Jean Delvare won't accept twl4030 the way it is
> > now. Old style i2c drivers will be dropped soon. We have to get twl4030
> > properly done otherwise it'll be a pain later.
>
> He's also not keen on growing drivers/i2c/chips ...
> So this driver should probably move to drivers/mfd too.
Sure... it should really be there since it really is a multifunction
device. In that case it would be merged through Samuel Ortiz, right ?
Most likely Cc:ing [EMAIL PROTECTED] so i2c people could comment on the
code as well.
> (When it starts moving upstream, I suspect some folk will
> ask why it doesn't support the drivers/regulator calls;
> that's still new, I'd not worry much.)
Well, but if we have proper APIs for doing stuff, we should really start
using them, don't you think ?
I'll postpone my twl4030-usb patch and try to work on twl4030-core.c.
It'll be a huge task moving all of that to new style i2c driver.
--
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
