We don't really need a whole new driver just for initializing
one pointer. Move it to core initialization.
Signed-off-by: Felipe Balbi <[EMAIL PROTECTED]>
---
drivers/i2c/chips/Kconfig | 4 --
drivers/i2c/chips/Makefile | 1 -
drivers/i2c/chips/twl4030-core.c | 32 ++++++++++++++-
drivers/i2c/chips/twl4030-poweroff.c | 76 ----------------------------------
4 files changed, 31 insertions(+), 82 deletions(-)
delete mode 100644 drivers/i2c/chips/twl4030-poweroff.c
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index e6ac6a2..819df47 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -186,10 +186,6 @@ config TWL4030_PWRBUTTON
tristate "TWL4030 Power button Driver"
depends on TWL4030_CORE
-config TWL4030_POWEROFF
- tristate "TWL4030 device poweroff"
- depends on TWL4030_CORE
-
config SENSORS_MAX6875
tristate "Maxim MAX6875 Power supply supervisor"
depends on EXPERIMENTAL
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 75c531a..221d929 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -26,7 +26,6 @@ obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o
obj-$(CONFIG_TWL4030_CORE) += twl4030-core.o twl4030-pwrirq.o
twl4030-power.o
obj-$(CONFIG_TWL4030_USB) += twl4030-usb.o
-obj-$(CONFIG_TWL4030_POWEROFF) += twl4030-poweroff.o
obj-$(CONFIG_TWL4030_PWRBUTTON) += twl4030-pwrbutton.o
obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o
obj-$(CONFIG_RTC_X1205_I2C) += x1205.o
diff --git a/drivers/i2c/chips/twl4030-core.c b/drivers/i2c/chips/twl4030-core.c
index e0a6ef4..6f06b8b 100644
--- a/drivers/i2c/chips/twl4030-core.c
+++ b/drivers/i2c/chips/twl4030-core.c
@@ -165,6 +165,10 @@
#define TWL4030_SIH_CTRL_COR_MASK (1 << 2)
+/* for pm_power_off */
+#define PWR_P1_SW_EVENTS 0x10
+#define PWR_DEVOFF (1<<0)
+
/**
* struct twl4030_mod_iregs - TWL module IMR/ISR regs to mask/clear at init
* @mod_no: TWL4030 module number (e.g., TWL4030_MODULE_GPIO)
@@ -1032,7 +1036,6 @@ static void twl_init_irq(int irq_num, unsigned irq_base,
unsigned irq_end)
ARRAY_SIZE(twl4030_mod_regs));
twl4030_irq_base = irq_base;
-
/* install an irq handler for each of the PIH modules */
for (i = irq_base; i < irq_end; i++) {
set_irq_chip(i, &twl4030_irq_chip);
@@ -1050,6 +1053,30 @@ static void twl_init_irq(int irq_num, unsigned irq_base,
unsigned irq_end)
pr_err("%s: %s[%d]\n", DRIVER_NAME, msg, res);
}
+static void twl4030_poweroff(void)
+{
+ int err;
+ u8 val;
+
+ err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &val,
+ PWR_P1_SW_EVENTS);
+ if (err) {
+ pr_err("%s: i2c error %d while reading TWL4030"
+ "PM_MASTER P1_SW_EVENTS\n",
+ DRIVER_NAME, err);
+ return;
+ }
+
+ val |= PWR_DEVOFF;
+
+ err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, val,
+ PWR_P1_SW_EVENTS);
+ if (err)
+ pr_err("%s: i2c error %d while writing TWL4030"
+ "PM_MASTER P1_SW_EVENTS\n",
+ DRIVER_NAME, err);
+}
+
/*----------------------------------------------------------------------*/
static int twl4030_remove(struct i2c_client *client)
@@ -1134,6 +1161,9 @@ twl4030_probe(struct i2c_client *client, const struct
i2c_device_id *id)
client->irq, pdata->irq_base, pdata->irq_end -
1);
}
+ /* initialize pm_power_off routine */
+ pm_power_off = twl4030_poweroff;
+
status = add_children(pdata);
fail:
if (status < 0)
diff --git a/drivers/i2c/chips/twl4030-poweroff.c
b/drivers/i2c/chips/twl4030-poweroff.c
deleted file mode 100644
index 0ebab0b..0000000
--- a/drivers/i2c/chips/twl4030-poweroff.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * linux/drivers/i2c/chips/twl4030_poweroff.c
- *
- * Power off device
- *
- * Copyright (C) 2008 Nokia Corporation
- *
- * Written by Peter De Schrijver <[EMAIL PROTECTED]>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file "COPYING" in the main directory of this
- * archive for more details.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/module.h>
-#include <linux/pm.h>
-#include <linux/i2c/twl4030.h>
-
-#define PWR_P1_SW_EVENTS 0x10
-#define PWR_DEVOFF (1<<0)
-
-static void twl4030_poweroff(void)
-{
- u8 val;
- int err;
-
- err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &val,
- PWR_P1_SW_EVENTS);
- if (err) {
- printk(KERN_WARNING "I2C error %d while reading TWL4030"
- "PM_MASTER P1_SW_EVENTS\n", err);
- return ;
- }
-
- val |= PWR_DEVOFF;
-
- err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, val,
- PWR_P1_SW_EVENTS);
-
- if (err) {
- printk(KERN_WARNING "I2C error %d while writing TWL4030"
- "PM_MASTER P1_SW_EVENTS\n", err);
- return ;
- }
-
- return;
-}
-
-static int __init twl4030_poweroff_init(void)
-{
- pm_power_off = twl4030_poweroff;
-
- return 0;
-}
-
-static void __exit twl4030_poweroff_exit(void)
-{
- pm_power_off = NULL;
-}
-
-module_init(twl4030_poweroff_init);
-module_exit(twl4030_poweroff_exit);
-
-MODULE_ALIAS("i2c:twl4030-poweroff");
-MODULE_DESCRIPTION("Triton2 device power off");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Peter De Schrijver");
--
1.6.0.2.307.gc427
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
