On Mon, Sep 29, 2008 at 6:14 AM, Felipe Balbi <[EMAIL PROTECTED]> wrote:
> use new style twl4030-core to register a platform_device
> for twl4030-usb.
>
> Signed-off-by: Felipe Balbi <[EMAIL PROTECTED]>
> ---
> arch/arm/mach-omap2/board-2430sdp.c | 6 +
> arch/arm/mach-omap2/board-3430sdp.c | 5 +
> arch/arm/mach-omap2/board-ldp.c | 7 +
> arch/arm/mach-omap2/board-omap2evm.c | 5 +
> arch/arm/mach-omap2/board-omap3beagle.c | 7 +
> arch/arm/mach-omap2/board-omap3evm.c | 6 +-
Still missing Overo in this patch. I'll make the required changes
locally and test this morning.
Steve
> drivers/i2c/chips/Kconfig | 16 --
> drivers/i2c/chips/twl4030-core.c | 27 +++
> drivers/i2c/chips/twl4030-usb.c | 328
> ++++++++++++++-----------------
> include/linux/i2c/twl4030.h | 10 +
> 10 files changed, 217 insertions(+), 200 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-2430sdp.c
> b/arch/arm/mach-omap2/board-2430sdp.c
> index 8c4c9dd..3073528 100644
> --- a/arch/arm/mach-omap2/board-2430sdp.c
> +++ b/arch/arm/mach-omap2/board-2430sdp.c
> @@ -344,12 +344,18 @@ static struct omap_board_config_kernel sdp2430_config[]
> __initdata = {
> {OMAP_TAG_SERIAL_CONSOLE, &sdp2430_serial_console_config},
> };
>
> +
> +static struct twl4030_usb_data sdp2430_usb_data = {
> + .usb_mode = T2_USB_MODE_ULPI,
> +};
> +
> static struct twl4030_platform_data sdp2430_twldata = {
> .irq_base = TWL4030_IRQ_BASE,
> .irq_end = TWL4030_IRQ_END,
>
> /* platform_data for children goes here */
> .keypad = &sdp2430_kp_data,
> + .usb = &sdp2430_usb_data,
> };
>
> static struct i2c_board_info __initdata sdp2430_i2c_boardinfo[] = {
> diff --git a/arch/arm/mach-omap2/board-3430sdp.c
> b/arch/arm/mach-omap2/board-3430sdp.c
> index fe1ba4e..e0c39c2 100644
> --- a/arch/arm/mach-omap2/board-3430sdp.c
> +++ b/arch/arm/mach-omap2/board-3430sdp.c
> @@ -300,12 +300,17 @@ static struct omap_board_config_kernel sdp3430_config[]
> __initdata = {
> { OMAP_TAG_LCD, &sdp3430_lcd_config },
> };
>
> +static struct twl4030_usb_data sdp3430_usb_data = {
> + .usb_mode = T2_USB_MODE_ULPI,
> +};
> +
> static struct twl4030_platform_data sdp3430_twldata = {
> .irq_base = TWL4030_IRQ_BASE,
> .irq_end = TWL4030_IRQ_END,
>
> /* platform_data for children goes here */
> .keypad = &sdp3430_kp_data,
> + .usb = &sdp3430_usb_data,
> };
>
> static struct i2c_board_info __initdata sdp3430_i2c_boardinfo[] = {
> diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
> index c07c712..219579b 100644
> --- a/arch/arm/mach-omap2/board-ldp.c
> +++ b/arch/arm/mach-omap2/board-ldp.c
> @@ -183,9 +183,16 @@ static struct omap_board_config_kernel ldp_config[]
> __initdata = {
> { OMAP_TAG_UART, &ldp_uart_config },
> };
>
> +static struct twl4030_usb_data ldp_usb_data = {
> + .usb_mode = T2_USB_MODE_ULPI,
> +};
> +
> static struct twl4030_platform_data ldp_twldata = {
> .irq_base = TWL4030_IRQ_BASE,
> .irq_end = TWL4030_IRQ_END,
> +
> + /* platform_data for children goes here */
> + .usb = &ldp_usb_data,
> };
>
> static struct i2c_board_info __initdata ldp_i2c_boardinfo[] = {
> diff --git a/arch/arm/mach-omap2/board-omap2evm.c
> b/arch/arm/mach-omap2/board-omap2evm.c
> index d2a3743..be8348d 100644
> --- a/arch/arm/mach-omap2/board-omap2evm.c
> +++ b/arch/arm/mach-omap2/board-omap2evm.c
> @@ -226,12 +226,17 @@ static struct omap_board_config_kernel
> omap2_evm_config[] __initdata = {
> { OMAP_TAG_LCD, &omap2_evm_lcd_config },
> };
>
> +static struct twl4030_usb_data omap2evm_usb_data = {
> + .usb_mode = T2_USB_MODE_ULPI,
> +};
> +
> static struct twl4030_platform_data omap2evm_twldata = {
> .irq_base = TWL4030_IRQ_BASE,
> .irq_end = TWL4030_IRQ_END,
>
> /* platform_data for children goes here */
> .keypad = &omap2evm_kp_data,
> + .usb = &omap2evm_usb_data,
> };
>
> static struct i2c_board_info __initdata omap2evm_i2c_boardinfo[] = {
> diff --git a/arch/arm/mach-omap2/board-omap3beagle.c
> b/arch/arm/mach-omap2/board-omap3beagle.c
> index fa8f5f6..ae677b9 100644
> --- a/arch/arm/mach-omap2/board-omap3beagle.c
> +++ b/arch/arm/mach-omap2/board-omap3beagle.c
> @@ -110,9 +110,16 @@ static struct omap_uart_config omap3_beagle_uart_config
> __initdata = {
> .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
> };
>
> +static struct twl4030_usb_data beagle_usb_data = {
> + .usb_mode = T2_USB_MODE_ULPI,
> +};
> +
> static struct twl4030_platform_data beagle_twldata = {
> .irq_base = TWL4030_IRQ_BASE,
> .irq_end = TWL4030_IRQ_END,
> +
> + /* platform_data for children goes here */
> + .usb = &beagle_usb_data,
> };
>
> static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = {
> diff --git a/arch/arm/mach-omap2/board-omap3evm.c
> b/arch/arm/mach-omap2/board-omap3evm.c
> index c4a969d..158138c 100644
> --- a/arch/arm/mach-omap2/board-omap3evm.c
> +++ b/arch/arm/mach-omap2/board-omap3evm.c
> @@ -90,6 +90,10 @@ static struct omap_uart_config omap3_evm_uart_config
> __initdata = {
> .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
> };
>
> +static struct twl4030_usb_data omap3evm_usb_data = {
> + .usb_mode = T2_USB_MODE_ULPI,
> +};
> +
> static int omap3evm_keymap[] = {
> KEY(0, 0, KEY_LEFT),
> KEY(0, 1, KEY_RIGHT),
> @@ -118,13 +122,13 @@ static struct twl4030_keypad_data omap3evm_kp_data = {
> .irq = TWL4030_MODIRQ_KEYPAD,
> };
>
> -
> static struct twl4030_platform_data omap3evm_twldata = {
> .irq_base = TWL4030_IRQ_BASE,
> .irq_end = TWL4030_IRQ_END,
>
> /* platform_data for children goes here */
> .keypad = &omap3evm_kp_data,
> + .usb = &omap3evm_usb_data,
> };
>
> static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
> diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
> index e91be60..121aec9 100644
> --- a/drivers/i2c/chips/Kconfig
> +++ b/drivers/i2c/chips/Kconfig
> @@ -186,22 +186,6 @@ config TWL4030_USB
> tristate "TWL4030 USB Transceiver Driver"
> depends on TWL4030_CORE
>
> -choice
> - prompt "Transceiver mode"
> - depends on TWL4030_USB
> - help
> - TWL4030 USB transceiver can operate in various
> - mutually-exclusive modes. Select one of them.
> -
> -config TWL4030_USB_HS_ULPI
> - depends on TWL4030_USB
> - bool "High-speed ULPI"
> - help
> - Say Y here if the TWL4030 is connected to high-speed USB
> - controller through a ULPI interface.
> -
> -endchoice
> -
> config TWL4030_PWRBUTTON
> tristate "TWL4030 Power button Driver"
> depends on TWL4030_CORE
> diff --git a/drivers/i2c/chips/twl4030-core.c
> b/drivers/i2c/chips/twl4030-core.c
> index 0a2d8fe..02be771 100644
> --- a/drivers/i2c/chips/twl4030-core.c
> +++ b/drivers/i2c/chips/twl4030-core.c
> @@ -57,6 +57,12 @@
> #define twl_has_keypad() false
> #endif
>
> +#if defined(CONFIG_TWL4030_USB) || defined(CONFIG_TWL4030_USB_MODULE)
> +#define twl_has_usb() true
> +#else
> +#define twl_has_usb() false
> +#endif
> +
> /* Primary Interrupt Handler on TWL4030 Registers */
>
> /* Register Definitions */
> @@ -701,6 +707,27 @@ static int add_children(struct twl4030_platform_data
> *pdata)
> }
> }
>
> + if (twl_has_usb() && pdata->usb) {
> + pdev = platform_device_alloc("twl4030_usb", -1);
> + if (pdev) {
> + twl = &twl4030_modules[TWL4030_SLAVENUM_NUM0];
> + pdev->dev.parent = &twl->client->dev;
> + device_init_wakeup(&pdev->dev, 1);
> + status = platform_device_add_data(pdev, pdata->usb,
> + sizeof(*pdata->usb));
> + if (status < 0) {
> + platform_device_put(pdev);
> + goto err;
> + }
> + status = platform_device_add(pdev);
> + if (status < 0)
> + platform_device_put(pdev);
> + } else {
> + status = -ENOMEM;
> + goto err;
> + }
> + }
> +
> err:
> pr_err("failed to add twl4030's children\n");
> return status;
> diff --git a/drivers/i2c/chips/twl4030-usb.c b/drivers/i2c/chips/twl4030-usb.c
> index 2906b82..d150805 100644
> --- a/drivers/i2c/chips/twl4030-usb.c
> +++ b/drivers/i2c/chips/twl4030-usb.c
> @@ -2,6 +2,8 @@
> * twl4030_usb - TWL4030 USB transceiver, talking to OMAP OTG controller
> *
> * Copyright (C) 2004-2007 Texas Instruments
> + * Copyright (C) 2008 Nokia Corporation
> + * Contact: Felipe Balbi <[EMAIL PROTECTED]>
> *
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License as published by
> @@ -22,11 +24,11 @@
> * - 3-pin mode support may be added in future.
> */
>
> -
> #include <linux/module.h>
> #include <linux/init.h>
> #include <linux/time.h>
> #include <linux/interrupt.h>
> +#include <linux/platform_device.h>
> #include <linux/io.h>
> #include <linux/usb.h>
> #include <linux/usb/ch9.h>
> @@ -228,14 +230,6 @@
> #define VUSB3V1_TYPE 0x78
> #define VUSB3V1_REMAP 0x79
>
> -#define ID_STATUS 0x96
> -#define ID_RES_FLOAT (1 << 4) /* mini-B */
> -#define ID_RES_440K (1 << 3) /* type 2 charger */
> -#define ID_RES_200K (1 << 2) /* 5-wire carkit or
> - type 1 charger */
> -#define ID_RES_102K (1 << 1) /* phone */
> -#define ID_RES_GND (1 << 0) /* mini-A */
> -
> /* In module TWL4030_MODULE_INTBR */
> #define PMBR1 0x0D
> #define GPIO_USB_4PIN_ULPI_2430C (3 << 0)
> @@ -250,11 +244,7 @@
> #define REG_PWR_SIH_CTRL 0x07
> #define COR (1 << 2)
>
> -/* internal define on top of container_of */
> -#define xceiv_to_twl(x) container_of((x), struct twl4030_usb,
> otg);
> -
> /* bits in OTG_CTRL */
> -
> #define OTG_XCEIV_OUTPUTS \
> (OTG_ASESSVLD|OTG_BSESSEND|OTG_BSESSVLD|OTG_VBUSVLD|OTG_ID)
> #define OTG_XCEIV_INPUTS \
> @@ -268,22 +258,23 @@
> OTG_CTRL_BITS)
>
>
> -/*-------------------------------------------------------------------------*/
> -
> struct twl4030_usb {
> struct otg_transceiver otg;
> + struct device *dev;
> +
> + /* pin configuration */
> + enum twl4030_usb_mode usb_mode;
> int irq;
> - u8 usb_mode; /* pin configuration */
> -#define T2_USB_MODE_ULPI 1
> -/* #define T2_USB_MODE_CEA2011_3PIN 2 */
> u8 asleep;
> };
>
> -static struct twl4030_usb *the_transceiver;
> +/* internal define on top of container_of */
> +#define xceiv_to_twl(x) container_of((x), struct twl4030_usb,
> otg);
>
> /*-------------------------------------------------------------------------*/
>
> -static int twl4030_i2c_write_u8_verify(u8 module, u8 data, u8 address)
> +static int twl4030_i2c_write_u8_verify(struct twl4030_usb *twl,
> + u8 module, u8 data, u8 address)
> {
> u8 check;
>
> @@ -297,46 +288,51 @@ static int twl4030_i2c_write_u8_verify(u8 module, u8
> data, u8 address)
> (check == data))
> return 0;
> /* Failed again: Return error */
> +
> return -EBUSY;
> }
>
> -#define twl4030_usb_write_verify(address, data) \
> - twl4030_i2c_write_u8_verify(TWL4030_MODULE_USB, (data), (address))
> +#define twl4030_usb_write_verify(twl, address, data) \
> + twl4030_i2c_write_u8_verify(twl, TWL4030_MODULE_USB, (data),
> (address))
>
> -static inline int twl4030_usb_write(u8 address, u8 data)
> +static inline int twl4030_usb_write(struct twl4030_usb *twl,
> + u8 address, u8 data)
> {
> int ret = 0;
> +
> ret = twl4030_i2c_write_u8(TWL4030_MODULE_USB, data, address);
> if (ret >= 0) {
> #if 0 /* debug */
> u8 data1;
> if (twl4030_i2c_read_u8(TWL4030_MODULE_USB, &data1,
> address) < 0)
> - printk(KERN_ERR "re-read failed\n");
> + dev_err(twl->dev, "re-read failed\n");
> else
> - printk(KERN_INFO
> + dev_dbg(twl->dev,
> "Write %s wrote %x read %x from reg %x\n",
> (data1 == data) ? "succeed" : "mismatch",
> data, data1, address);
> #endif
> } else {
> - printk(KERN_WARNING
> + dev_warn(twl->dev,
> "TWL4030:USB:Write[0x%x] Error %d\n", address, ret);
> }
> +
> return ret;
> }
>
> -static inline int twl4030_usb_read(u8 address)
> +static inline int twl4030_usb_read(struct twl4030_usb *twl, u8 address)
> {
> u8 data;
> int ret = 0;
> +
> ret = twl4030_i2c_read_u8(TWL4030_MODULE_USB, &data, address);
> - if (ret >= 0) {
> + if (ret >= 0)
> ret = data;
> - } else {
> - printk(KERN_WARNING
> + else
> + dev_warn(twl->dev,
> "TWL4030:USB:Read[0x%x] Error %d\n", address, ret);
> - }
> +
> return ret;
> }
>
> @@ -345,14 +341,13 @@ static inline int twl4030_usb_read(u8 address)
> static inline int
> twl4030_usb_set_bits(struct twl4030_usb *twl, u8 reg, u8 bits)
> {
> - return twl4030_usb_write(reg + 1, bits);
> + return twl4030_usb_write(twl, reg + 1, bits);
> }
>
> static inline int
> twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits)
> {
> - return twl4030_usb_write(reg + 2, bits);
> -
> + return twl4030_usb_write(twl, reg + 2, bits);
> }
>
> /*-------------------------------------------------------------------------*/
> @@ -380,185 +375,130 @@ static void twl4030_usb_set_mode(struct twl4030_usb
> *twl, int mode)
> };
> }
>
> -#ifdef CONFIG_TWL4030_USB_HS_ULPI
> -static void hs_usb_init(struct twl4030_usb *twl)
> -{
> - twl->usb_mode = T2_USB_MODE_ULPI;
> - return;
> -}
> -
> -#endif
> -
> -static void twl4030_i2c_access(int on)
> +static void twl4030_i2c_access(struct twl4030_usb *twl, int on)
> {
> unsigned long timeout;
> - int val = twl4030_usb_read(PHY_CLK_CTRL);
> + int val = twl4030_usb_read(twl, PHY_CLK_CTRL);
>
> if (val >= 0) {
> if (on) {
> /* enable DPLL to access PHY registers over I2C */
> val |= REQ_PHY_DPLL_CLK;
> - if (twl4030_usb_write_verify(PHY_CLK_CTRL,
> - (u8)val) < 0)
> {
> - printk(KERN_ERR "twl4030_usb: i2c write
> failed,"
> - " line %d\n", __LINE__);
> - return;
> - }
> + WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL,
> + (u8)val) < 0);
>
> timeout = jiffies + HZ;
> - while (!(twl4030_usb_read(PHY_CLK_CTRL_STS) &
> + while (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) &
> PHY_DPLL_CLK)
> && time_before(jiffies, timeout))
> udelay(10);
> - if (!(twl4030_usb_read(PHY_CLK_CTRL_STS) &
> + if (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) &
> PHY_DPLL_CLK))
> - printk(KERN_ERR "Timeout setting T2 HSUSB "
> + dev_err(twl->dev, "Timeout setting T2 HSUSB "
> "PHY DPLL clock\n");
> } else {
> /* let ULPI control the DPLL clock */
> val &= ~REQ_PHY_DPLL_CLK;
> - if (twl4030_usb_write_verify(PHY_CLK_CTRL,
> - (u8)val) < 0)
> {
> - printk(KERN_ERR "twl4030_usb: i2c write
> failed,"
> - " line %d\n", __LINE__);
> - }
> + WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL,
> + (u8)val) < 0);
> }
> }
> - return;
> }
>
> -static void usb_irq_enable(int rising, int falling)
> +static void usb_irq_enable(struct twl4030_usb *twl, int rising, int falling)
> {
> u8 val;
>
> /* edge setup */
> - if (twl4030_i2c_read_u8(TWL4030_MODULE_INT, &val, REG_PWR_EDR1) < 0) {
> - printk(KERN_ERR "twl4030_usb: i2c read failed,"
> - " line %d\n", __LINE__);
> - return;
> - }
> + WARN_ON(twl4030_i2c_read_u8(TWL4030_MODULE_INT,
> + &val, REG_PWR_EDR1) < 0);
> +
> val &= ~(USB_PRES_RISING | USB_PRES_FALLING);
> if (rising)
> val = val | USB_PRES_RISING;
> if (falling)
> val = val | USB_PRES_FALLING;
> - if (twl4030_i2c_write_u8_verify(TWL4030_MODULE_INT, val,
> - REG_PWR_EDR1) < 0) {
> - printk(KERN_ERR "twl4030_usb: i2c write failed,"
> - " line %d\n", __LINE__);
> - return;
> - }
> + WARN_ON(twl4030_i2c_write_u8_verify(twl, TWL4030_MODULE_INT,
> + val, REG_PWR_EDR1) < 0);
>
> /* un-mask interrupt */
> - if (twl4030_i2c_read_u8(TWL4030_MODULE_INT, &val, REG_PWR_IMR1) < 0) {
> - printk(KERN_ERR "twl4030_usb: i2c read failed,"
> - " line %d\n", __LINE__);
> - return;
> - }
> + WARN_ON(twl4030_i2c_read_u8(TWL4030_MODULE_INT,
> + &val, REG_PWR_IMR1) < 0);
> +
> val &= ~USB_PRES;
> - if (twl4030_i2c_write_u8_verify(TWL4030_MODULE_INT, val,
> - REG_PWR_IMR1) < 0)
> - printk(KERN_ERR "twl4030_usb: i2c write failed,"
> - " line %d\n", __LINE__);
>
> - return;
> + WARN_ON(twl4030_i2c_write_u8_verify(twl, TWL4030_MODULE_INT,
> + val, REG_PWR_IMR1) < 0);
> }
>
> -static void usb_irq_disable(void)
> +static void usb_irq_disable(struct twl4030_usb *twl)
> {
> u8 val;
>
> /* undo edge setup */
> - if (twl4030_i2c_read_u8(TWL4030_MODULE_INT, &val, REG_PWR_EDR1) < 0) {
> - printk(KERN_ERR "twl4030_usb: i2c read failed,"
> - " line %d\n", __LINE__);
> - return;
> - }
> + WARN_ON(twl4030_i2c_read_u8(TWL4030_MODULE_INT,
> + &val, REG_PWR_EDR1) < 0);
> val &= ~(USB_PRES_RISING | USB_PRES_FALLING);
> - if (twl4030_i2c_write_u8_verify(TWL4030_MODULE_INT, val,
> - REG_PWR_EDR1) < 0) {
> - printk(KERN_ERR "twl4030_usb: i2c write failed,"
> - " line %d\n", __LINE__);
> - return;
> - }
> + WARN_ON(twl4030_i2c_write_u8_verify(twl, TWL4030_MODULE_INT,
> + val, REG_PWR_EDR1) < 0);
>
> /* mask interrupt */
> - if (twl4030_i2c_read_u8(TWL4030_MODULE_INT, &val, REG_PWR_IMR1) < 0) {
> - printk(KERN_ERR "twl4030_usb: i2c read failed,"
> - " line %d\n", __LINE__);
> - return;
> - }
> + WARN_ON(twl4030_i2c_read_u8(TWL4030_MODULE_INT,
> + &val, REG_PWR_IMR1) < 0);
> val |= USB_PRES;
> - if (twl4030_i2c_write_u8_verify(TWL4030_MODULE_INT, val,
> - REG_PWR_IMR1) < 0)
> - printk(KERN_ERR "twl4030_usb: i2c write failed,"
> - " line %d\n", __LINE__);
>
> - return;
> + WARN_ON(twl4030_i2c_write_u8_verify(twl, TWL4030_MODULE_INT,
> + val, REG_PWR_IMR1) < 0);
> }
>
> static void twl4030_phy_power(struct twl4030_usb *twl, int on)
> {
> u8 pwr;
>
> - pwr = twl4030_usb_read(PHY_PWR_CTRL);
> + pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
> if (on) {
> pwr &= ~PHY_PWR_PHYPWD;
> - if (twl4030_usb_write_verify(PHY_PWR_CTRL, pwr) < 0) {
> - printk(KERN_ERR "twl4030_usb: i2c write failed,"
> - " line %d\n", __LINE__);
> - return;
> - }
> - twl4030_usb_write(PHY_CLK_CTRL,
> - twl4030_usb_read(PHY_CLK_CTRL) |
> + WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
> + twl4030_usb_write(twl, PHY_CLK_CTRL,
> + twl4030_usb_read(twl, PHY_CLK_CTRL) |
> (PHY_CLK_CTRL_CLOCKGATING_EN |
> PHY_CLK_CTRL_CLK32K_EN));
> } else {
> pwr |= PHY_PWR_PHYPWD;
> - if (twl4030_usb_write_verify(PHY_PWR_CTRL, pwr) < 0) {
> - printk(KERN_ERR "twl4030_usb: i2c write failed,"
> - " line %d\n", __LINE__);
> - }
> + WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
> }
> - return;
> }
>
> -static void twl4030_phy_suspend(int controller_off)
> +static void twl4030_phy_suspend(struct twl4030_usb *twl, int controller_off)
> {
> - struct twl4030_usb *twl = the_transceiver;
> -
> if (controller_off)
> - usb_irq_disable();
> + usb_irq_disable(twl);
>
> if (twl->asleep)
> return;
>
> if (!controller_off)
> /* enable rising edge interrupt to detect cable attach */
> - usb_irq_enable(1, 0);
> + usb_irq_enable(twl, 1, 0);
>
> twl4030_phy_power(twl, 0);
> twl->asleep = 1;
> - return;
> }
>
> -static void twl4030_phy_resume(void)
> +static void twl4030_phy_resume(struct twl4030_usb *twl)
> {
> - struct twl4030_usb *twl = the_transceiver;
> -
> if (!twl->asleep)
> return;
>
> /* enable falling edge interrupt to detect cable detach */
> - usb_irq_enable(0, 1);
> + usb_irq_enable(twl, 0, 1);
>
> twl4030_phy_power(twl, 1);
> - twl4030_i2c_access(1);
> + twl4030_i2c_access(twl, 1);
> twl4030_usb_set_mode(twl, twl->usb_mode);
> if (twl->usb_mode == T2_USB_MODE_ULPI)
> - twl4030_i2c_access(0);
> + twl4030_i2c_access(twl, 0);
> twl->asleep = 0;
> - return;
> }
>
> static void twl4030_usb_ldo_init(struct twl4030_usb *twl)
> @@ -591,59 +531,57 @@ static void twl4030_usb_ldo_init(struct twl4030_usb
> *twl)
>
> static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
> {
> - int ret = IRQ_NONE;
> + struct twl4030_usb *twl = _twl;
> u8 val;
>
> /* action based on cable attach or detach */
> - if (twl4030_i2c_read_u8(TWL4030_MODULE_INT, &val, REG_PWR_EDR1) < 0) {
> - printk(KERN_ERR "twl4030_usb: i2c read failed,"
> - " line %d\n", __LINE__);
> - goto done;
> - }
> + WARN_ON(twl4030_i2c_read_u8(TWL4030_MODULE_INT,
> + &val, REG_PWR_EDR1) < 0);
>
> if (val & USB_PRES_RISING) {
> - twl4030_phy_resume();
> + twl4030_phy_resume(twl);
> twl4030charger_usb_en(1);
> } else {
> twl4030charger_usb_en(0);
> - twl4030_phy_suspend(0);
> + twl4030_phy_suspend(twl, 0);
> }
>
> - ret = IRQ_HANDLED;
> -
> -done:
> - return ret;
> + return IRQ_HANDLED;
> }
>
> static int twl4030_set_suspend(struct otg_transceiver *x, int suspend)
> {
> + struct twl4030_usb *twl = xceiv_to_twl(x);
> +
> if (suspend)
> - twl4030_phy_suspend(1);
> + twl4030_phy_suspend(twl, 1);
> else
> - twl4030_phy_resume();
> + twl4030_phy_resume(twl);
>
> return 0;
> }
>
> -static int twl4030_set_peripheral(struct otg_transceiver *xceiv,
> +static int twl4030_set_peripheral(struct otg_transceiver *x,
> struct usb_gadget *gadget)
> {
> + struct twl4030_usb *twl;
> u32 l;
> - struct twl4030_usb *twl = xceiv_to_twl(xceiv);
>
> - if (!xceiv)
> + if (!x)
> return -ENODEV;
>
> + twl = xceiv_to_twl(x);
> +
> if (!gadget) {
> omap_writew(0, OTG_IRQ_EN);
> - twl4030_phy_suspend(1);
> + twl4030_phy_suspend(twl, 1);
> twl->otg.gadget = NULL;
>
> return -ENODEV;
> }
>
> twl->otg.gadget = gadget;
> - twl4030_phy_resume();
> + twl4030_phy_resume(twl);
>
> l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
> l &= ~(OTG_XCEIV_OUTPUTS|OTG_CTRL_BITS);
> @@ -660,23 +598,25 @@ static int twl4030_set_peripheral(struct
> otg_transceiver *xceiv,
> return 0;
> }
>
> -static int twl4030_set_host(struct otg_transceiver *xceiv, struct usb_bus
> *host)
> +static int twl4030_set_host(struct otg_transceiver *x, struct usb_bus *host)
> {
> - struct twl4030_usb *twl = xceiv_to_twl(xceiv);
> + struct twl4030_usb *twl;
>
> - if (!xceiv)
> + if (!x)
> return -ENODEV;
>
> + twl = xceiv_to_twl(x);
> +
> if (!host) {
> omap_writew(0, OTG_IRQ_EN);
> - twl4030_phy_suspend(1);
> + twl4030_phy_suspend(twl, 1);
> twl->otg.host = NULL;
>
> return -ENODEV;
> }
>
> twl->otg.host = host;
> - twl4030_phy_resume();
> + twl4030_phy_resume(twl);
>
> twl4030_usb_set_bits(twl, TWL4030_OTG_CTRL,
> TWL4030_OTG_CTRL_DMPULLDOWN
> @@ -689,63 +629,65 @@ static int twl4030_set_host(struct otg_transceiver
> *xceiv, struct usb_bus *host)
> return 0;
> }
>
> -static int __init twl4030_usb_init(void)
> +static int __init twl4030_usb_probe(struct platform_device *pdev)
> {
> + struct twl4030_usb_data *pdata = pdev->dev.platform_data;
> struct twl4030_usb *twl;
> int status;
>
> - if (the_transceiver)
> - return 0;
> -
> twl = kzalloc(sizeof *twl, GFP_KERNEL);
> if (!twl)
> - return 0;
> -
> - the_transceiver = twl;
> + return -ENOMEM;
>
> + twl->dev = &pdev->dev;
> twl->irq = TWL4030_PWRIRQ_USB_PRES;
> twl->otg.set_host = twl4030_set_host;
> twl->otg.set_peripheral = twl4030_set_peripheral;
> twl->otg.set_suspend = twl4030_set_suspend;
>
> - usb_irq_disable();
> + if (!pdata) {
> + dev_info(&pdev->dev, "platform_data not available, defaulting"
> + " to ULPI mode\n");
> + twl->usb_mode = T2_USB_MODE_ULPI;
> + } else {
> + twl->usb_mode = pdata->usb_mode;
> + }
> +
> + usb_irq_disable(twl);
> status = request_irq(twl->irq, twl4030_usb_irq, 0, "twl4030_usb", twl);
> if (status < 0) {
> - printk(KERN_DEBUG "can't get IRQ %d, err %d\n",
> + dev_dbg(&pdev->dev, "can't get IRQ %d, err %d\n",
> twl->irq, status);
> kfree(twl);
> - return -ENODEV;
> + return status;
> }
>
> -#if defined(CONFIG_TWL4030_USB_HS_ULPI)
> - hs_usb_init(twl);
> -#endif
> +
> twl4030_usb_ldo_init(twl);
> twl4030_phy_power(twl, 1);
> - twl4030_i2c_access(1);
> + twl4030_i2c_access(twl, 1);
> twl4030_usb_set_mode(twl, twl->usb_mode);
> - if (twl->usb_mode == T2_USB_MODE_ULPI)
> - twl4030_i2c_access(0);
>
> twl->asleep = 0;
>
> - if (twl->usb_mode == T2_USB_MODE_ULPI)
> - twl4030_phy_suspend(1);
> + if (twl->usb_mode == T2_USB_MODE_ULPI) {
> + twl4030_i2c_access(twl, 0);
> + twl4030_phy_suspend(twl, 0);
> + }
>
> otg_set_transceiver(&twl->otg);
> -
> - printk(KERN_INFO "Initialized TWL4030 USB module\n");
> + platform_set_drvdata(pdev, twl);
> + dev_info(&pdev->dev, "Initialized TWL4030 USB module\n");
>
> return 0;
> }
>
> -
> -static void __exit twl4030_usb_exit(void)
> +static int __exit twl4030_usb_remove(struct platform_device *pdev)
> {
> - struct twl4030_usb *twl = the_transceiver;
> + struct twl4030_usb *twl = platform_get_drvdata(pdev);
> int val;
>
> - usb_irq_disable();
> + usb_irq_disable(twl);
> free_irq(twl->irq, twl);
>
> /* set transceiver mode to power on defaults */
> @@ -755,11 +697,11 @@ static void __exit twl4030_usb_exit(void)
> * clear dpll clock request for i2c access,
> * disable 32KHz
> */
> - val = twl4030_usb_read(PHY_CLK_CTRL);
> + val = twl4030_usb_read(twl, PHY_CLK_CTRL);
> if (val >= 0) {
> val |= PHY_CLK_CTRL_CLOCKGATING_EN;
> val &= ~(PHY_CLK_CTRL_CLK32K_EN | REQ_PHY_DPLL_CLK);
> - twl4030_usb_write(PHY_CLK_CTRL, (u8)val);
> + twl4030_usb_write(twl, PHY_CLK_CTRL, (u8)val);
> }
>
> /* disable complete OTG block */
> @@ -768,12 +710,32 @@ static void __exit twl4030_usb_exit(void)
> twl4030_phy_power(twl, 0);
>
> kfree(twl);
> +
> + return 0;
> }
>
> -subsys_initcall(twl4030_usb_init);
> +static struct platform_driver twl4030_driver = {
> + .probe = twl4030_usb_probe,
> + .remove = __exit_p(twl4030_remove),
> + .driver = {
> + .name = "twl4030_usb",
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +static int __init twl4030_usb_init(void)
> +{
> + return platform_driver_register(&twl4030_driver);
> +}
> +module_init(twl4030_usb_init);
> +
> +static void __exit twl4030_usb_exit(void)
> +{
> + platform_driver_unregister(&twl4030_driver);
> +}
> module_exit(twl4030_usb_exit);
>
> -MODULE_ALIAS("i2c:twl4030-usb");
> -MODULE_AUTHOR("Texas Instruments, Inc.");
> +MODULE_ALIAS("platform:twl4030_usb");
> +MODULE_AUTHOR("Texas Instruments, Inc, Nokia Corporation");
> MODULE_DESCRIPTION("TWL4030 USB transceiver driver");
> MODULE_LICENSE("GPL");
> diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h
> index 0ac417c..8a12ff0 100644
> --- a/include/linux/i2c/twl4030.h
> +++ b/include/linux/i2c/twl4030.h
> @@ -61,9 +61,19 @@ struct twl4030_keypad_data {
> unsigned int rep:1;
> };
>
> +enum twl4030_usb_mode {
> + T2_USB_MODE_ULPI = 1,
> + T2_USB_MODE_CEA2011_3PIN = 2,
> +};
> +
> +struct twl4030_usb_data {
> + enum twl4030_usb_mode usb_mode;
> +};
> +
> struct twl4030_platform_data {
> unsigned irq_base, irq_end;
> struct twl4030_keypad_data *keypad;
> + struct twl4030_usb_data *usb;
>
> /* REVISIT more to come ... _nothing_ should be hard-wired */
> };
> --
> 1.6.0.2.307.gc427
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [EMAIL PROTECTED]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
