That cast was annyoing for quite a while. Now
omap_ctrl_base_get() returns void __iomem *
and __raw_read/write friends uses void __iomem *
so there's no need for casting.
Signed-off-by: Felipe Balbi <[EMAIL PROTECTED]>
---
arch/arm/mach-omap2/board-3430sdp.c | 7 ++++---
arch/arm/mach-omap2/board-ldp.c | 7 ++++---
2 files changed, 8 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c
b/arch/arm/mach-omap2/board-3430sdp.c
index 4264b68..530a4d4 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -129,7 +129,8 @@ static int __init msecure_init(void)
/* 3430ES2.0 doesn't have msecure/gpio-22 line connected to T2 */
if (omap_type() == OMAP2_DEVICE_TYPE_GP &&
system_rev < OMAP3430_REV_ES2_0) {
- u32 msecure_pad_config_reg = omap_ctrl_base_get() + 0xA3C;
+ void __iomem *msecure_pad_config_reg = omap_ctrl_base_get() +
+ 0xA3C;
int mux_mask = 0x04;
u16 tmp;
@@ -144,10 +145,10 @@ static int __init msecure_init(void)
* is low. Make msecure line high in order to change the
* TWL4030 RTC time and calender registers.
*/
- tmp = omap_readw(msecure_pad_config_reg);
+ tmp = __raw_readw(msecure_pad_config_reg);
tmp &= 0xF8; /* To enable mux mode 03/04 = GPIO_RTC */
tmp |= mux_mask;/* To enable mux mode 03/04 = GPIO_RTC */
- omap_writew(tmp, msecure_pad_config_reg);
+ __raw_writew(tmp, msecure_pad_config_reg);
gpio_direction_output(TWL4030_MSECURE_GPIO, 1);
}
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 35c03b7..96452ad 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -56,7 +56,8 @@ static int __init msecure_init(void)
/* 3430ES2.0 doesn't have msecure/gpio-22 line connected to T2 */
if (omap_device_type() == OMAP2_DEVICE_TYPE_GP &&
system_rev < OMAP3430_REV_ES2_0) {
- u32 msecure_pad_config_reg = omap_ctrl_base_get() + 0xA3C;
+ void __iomem *msecure_pad_config_reg = omap_ctrl_base_get() +
+ 0xA3C;
int mux_mask = 0x04;
u16 tmp;
@@ -72,10 +73,10 @@ static int __init msecure_init(void)
* TWL4030 RTC time and calender registers.
*/
- tmp = omap_readw(msecure_pad_config_reg);
+ tmp = __raw_readw(msecure_pad_config_reg);
tmp &= 0xF8; /* To enable mux mode 03/04 = GPIO_RTC */
tmp |= mux_mask;/* To enable mux mode 03/04 = GPIO_RTC */
- omap_writew(tmp, msecure_pad_config_reg);
+ __raw_writew(tmp, msecure_pad_config_reg);
gpio_direction_output(TWL4030_MSECURE_GPIO, 1);
}
--
1.6.0.1.196.g01914
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
