* Felipe Balbi <[EMAIL PROTECTED]> [080930 11:49]:
> That cast was annyoing for quite a while. Now
> omap_ctrl_base_get() returns void __iomem *
> and __raw_read/write friends uses void __iomem *
> so there's no need for casting.
Pushing the board-3430sdp.c changes, board-ldp.c is already fixed.
Tony
> Signed-off-by: Felipe Balbi <[EMAIL PROTECTED]>
> ---
> arch/arm/mach-omap2/board-3430sdp.c | 7 ++++---
> arch/arm/mach-omap2/board-ldp.c | 7 ++++---
> 2 files changed, 8 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-3430sdp.c
> b/arch/arm/mach-omap2/board-3430sdp.c
> index 4264b68..530a4d4 100644
> --- a/arch/arm/mach-omap2/board-3430sdp.c
> +++ b/arch/arm/mach-omap2/board-3430sdp.c
> @@ -129,7 +129,8 @@ static int __init msecure_init(void)
> /* 3430ES2.0 doesn't have msecure/gpio-22 line connected to T2 */
> if (omap_type() == OMAP2_DEVICE_TYPE_GP &&
> system_rev < OMAP3430_REV_ES2_0) {
> - u32 msecure_pad_config_reg = omap_ctrl_base_get() + 0xA3C;
> + void __iomem *msecure_pad_config_reg = omap_ctrl_base_get() +
> + 0xA3C;
> int mux_mask = 0x04;
> u16 tmp;
>
> @@ -144,10 +145,10 @@ static int __init msecure_init(void)
> * is low. Make msecure line high in order to change the
> * TWL4030 RTC time and calender registers.
> */
> - tmp = omap_readw(msecure_pad_config_reg);
> + tmp = __raw_readw(msecure_pad_config_reg);
> tmp &= 0xF8; /* To enable mux mode 03/04 = GPIO_RTC */
> tmp |= mux_mask;/* To enable mux mode 03/04 = GPIO_RTC */
> - omap_writew(tmp, msecure_pad_config_reg);
> + __raw_writew(tmp, msecure_pad_config_reg);
>
> gpio_direction_output(TWL4030_MSECURE_GPIO, 1);
> }
> diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
> index 35c03b7..96452ad 100644
> --- a/arch/arm/mach-omap2/board-ldp.c
> +++ b/arch/arm/mach-omap2/board-ldp.c
> @@ -56,7 +56,8 @@ static int __init msecure_init(void)
> /* 3430ES2.0 doesn't have msecure/gpio-22 line connected to T2 */
> if (omap_device_type() == OMAP2_DEVICE_TYPE_GP &&
> system_rev < OMAP3430_REV_ES2_0) {
> - u32 msecure_pad_config_reg = omap_ctrl_base_get() + 0xA3C;
> + void __iomem *msecure_pad_config_reg = omap_ctrl_base_get() +
> + 0xA3C;
> int mux_mask = 0x04;
> u16 tmp;
>
> @@ -72,10 +73,10 @@ static int __init msecure_init(void)
> * TWL4030 RTC time and calender registers.
> */
>
> - tmp = omap_readw(msecure_pad_config_reg);
> + tmp = __raw_readw(msecure_pad_config_reg);
> tmp &= 0xF8; /* To enable mux mode 03/04 = GPIO_RTC */
> tmp |= mux_mask;/* To enable mux mode 03/04 = GPIO_RTC */
> - omap_writew(tmp, msecure_pad_config_reg);
> + __raw_writew(tmp, msecure_pad_config_reg);
>
> gpio_direction_output(TWL4030_MSECURE_GPIO, 1);
> }
> --
> 1.6.0.1.196.g01914
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [EMAIL PROTECTED]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
