From: David Brownell <[EMAIL PROTECTED]>
Improve handling of the OMAP-specific setup in twl4030-core,
and remove various warnings on non-OMAP builds.
The main remaining portability problem for this core code (from
a build perspective) is needing symbols like TWL4030_PWR_IRQ_BASE
which are undesirable and platform-specific.
Signed-off-by: David Brownell <[EMAIL PROTECTED]>
Signed-off-by: Felipe Balbi <[EMAIL PROTECTED]>
---
drivers/i2c/chips/twl4030-core.c | 34 ++++++++++++++++++++++++----------
1 files changed, 24 insertions(+), 10 deletions(-)
diff --git a/drivers/i2c/chips/twl4030-core.c b/drivers/i2c/chips/twl4030-core.c
index 43424a8..efba776 100644
--- a/drivers/i2c/chips/twl4030-core.c
+++ b/drivers/i2c/chips/twl4030-core.c
@@ -75,6 +75,19 @@
#define twl_has_usb() false
#endif
+static inline void activate_irq(int irq)
+{
+#ifdef CONFIG_ARM
+ /* ARM requires an extra step to clear IRQ_NOREQUEST, which it
+ * sets on behalf of every irq_chip. Also sets IRQ_NOPROBE.
+ */
+ set_irq_flags(irq, IRQF_VALID);
+#else
+ /* same effect on other architectures */
+ set_irq_noprobe(irq);
+#endif
+}
+
/* Primary Interrupt Handler on TWL4030 Registers */
/* Register Definitions */
@@ -584,7 +597,7 @@ static unsigned twl4030_irq_base;
*/
static int twl4030_irq_thread(void *data)
{
- int irq = (int)data;
+ long irq = (long)data;
irq_desc_t *desc = irq_desc + irq;
static unsigned i2c_errors;
const static unsigned max_i2c_errors = 100;
@@ -868,15 +881,15 @@ err:
return status;
}
-static struct task_struct * __init start_twl4030_irq_thread(int irq)
+static struct task_struct * __init start_twl4030_irq_thread(long irq)
{
struct task_struct *thread;
init_completion(&irq_event);
thread = kthread_run(twl4030_irq_thread, (void *)irq,
- "twl4030 irq %d", irq);
+ "twl4030 irq %ld", irq);
if (!thread)
- pr_err("%s: could not create twl4030 irq %d thread!\n",
+ pr_err("%s: could not create twl4030 irq %ld thread!\n",
DRIVER_NAME, irq);
return thread;
@@ -909,16 +922,18 @@ static int __init unprotect_pm_master(void)
static int __init power_companion_init(void)
{
int e = 0;
-
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
struct clk *osc;
u32 rate;
u8 ctrl = HFCLK_FREQ_26_MHZ;
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
if (cpu_is_omap2430())
osc = clk_get(NULL, "osc_ck");
else
osc = clk_get(NULL, "osc_sys_ck");
+#else
+ osc = ERR_PTR(-EIO);
+#endif
if (IS_ERR(osc)) {
printk(KERN_WARNING "Skipping twl4030 internal clock init and "
"using bootloader value (unknown osc rate)\n");
@@ -945,7 +960,6 @@ static int __init power_companion_init(void)
/* effect->MADC+USB ck en */
e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, ctrl, R_CFG_BOOT);
e |= protect_pm_master();
-#endif /* OMAP */
return e;
}
@@ -1051,9 +1065,9 @@ static void twl_init_irq(int irq_num, unsigned irq_base,
unsigned irq_end)
/* install an irq handler for each of the PIH modules */
for (i = irq_base; i < irq_end; i++) {
- set_irq_chip(i, &twl4030_irq_chip);
- set_irq_handler(i, do_twl4030_module_irq);
- set_irq_flags(i, IRQF_VALID);
+ set_irq_chip_and_handler(i, &twl4030_irq_chip,
+ do_twl4030_module_irq);
+ activate_irq(i);
}
/* install an irq handler to demultiplex the TWL4030 interrupt */
--
1.6.0.1.196.g01914
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
