* Tony Lindgren <[EMAIL PROTECTED]> [081003 15:26]:
> From: Steve Sakoman <[EMAIL PROTECTED]>
>
> This patch adds support for basic features: nand, uarts, i2c,
> mmc, rtc, and usb
Hmm, looks like I need to update this description as mmc and
usb code is not ready yet.
> Signed-off-by: Steve Sakoman <[EMAIL PROTECTED]>
> Signed-off-by: Tony Lindgren <[EMAIL PROTECTED]>
>
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index 7634f23..477a613 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -49,3 +49,6 @@ config MACH_OMAP3_BEAGLE
> bool "OMAP3 BEAGLE board"
> depends on ARCH_OMAP3 && ARCH_OMAP34XX
>
> +config MACH_OVERO
> + bool "Gumstix Overo board"
> + depends on ARCH_OMAP3 && ARCH_OMAP34XX
> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
> index 420ad9a..feb9caf 100644
> --- a/arch/arm/mach-omap2/Makefile
> +++ b/arch/arm/mach-omap2/Makefile
> @@ -30,4 +30,5 @@ obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
> obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o
> obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
> obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o
> +obj-$(CONFIG_MACH_OVERO) += board-overo.o
>
> diff --git a/arch/arm/mach-omap2/board-overo.c
> b/arch/arm/mach-omap2/board-overo.c
> new file mode 100644
> index 0000000..394d88f
> --- /dev/null
> +++ b/arch/arm/mach-omap2/board-overo.c
> @@ -0,0 +1,235 @@
> +/*
> + * board-overo.c (Gumstix Overo)
> + *
> + * Initial code: Steve Sakoman <[EMAIL PROTECTED]>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
> + * 02110-1301 USA
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/platform_device.h>
> +
> +#include <linux/mtd/mtd.h>
> +#include <linux/mtd/nand.h>
> +#include <linux/mtd/partitions.h>
> +
> +#include <asm/mach-types.h>
> +#include <asm/mach/arch.h>
> +#include <asm/mach/flash.h>
> +#include <asm/mach/map.h>
> +
> +#include <mach/board-overo.h>
> +#include <mach/board.h>
> +#include <mach/common.h>
> +#include <mach/gpio.h>
> +#include <mach/gpmc.h>
> +#include <mach/hardware.h>
> +#include <mach/nand.h>
> +
> +#define NAND_BLOCK_SIZE SZ_128K
> +#define GPMC_CS0_BASE 0x60
> +#define GPMC_CS_SIZE 0x30
> +
> +static struct mtd_partition overo_nand_partitions[] = {
> + {
> + .name = "xloader",
> + .offset = 0, /* Offset = 0x00000 */
> + .size = 4 * NAND_BLOCK_SIZE,
> + .mask_flags = MTD_WRITEABLE
> + },
> + {
> + .name = "uboot",
> + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
> + .size = 14 * NAND_BLOCK_SIZE,
> + },
> + {
> + .name = "uboot environment",
> + .offset = MTDPART_OFS_APPEND, /* Offset = 0x240000 */
> + .size = 2 * NAND_BLOCK_SIZE,
> + },
> + {
> + .name = "linux",
> + .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
> + .size = 32 * NAND_BLOCK_SIZE,
> + },
> + {
> + .name = "rootfs",
> + .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
> + .size = MTDPART_SIZ_FULL,
> + },
> +};
> +
> +static struct omap_nand_platform_data overo_nand_data = {
> + .parts = overo_nand_partitions,
> + .nr_parts = ARRAY_SIZE(overo_nand_partitions),
> + .dma_channel = -1, /* disable DMA in OMAP NAND driver */
> +};
> +
> +static struct resource overo_nand_resource = {
> + .flags = IORESOURCE_MEM,
> +};
> +
> +static struct platform_device overo_nand_device = {
> + .name = "omap2-nand",
> + .id = -1,
> + .dev = {
> + .platform_data = &overo_nand_data,
> + },
> + .num_resources = 1,
> + .resource = &overo_nand_resource,
> +};
> +
> +
> +static void __init overo_flash_init(void)
> +{
> + u8 cs = 0;
> + u8 nandcs = GPMC_CS_NUM + 1;
> +
> + u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
> +
> + /* find out the chip-select on which NAND exists */
> + while (cs < GPMC_CS_NUM) {
> + u32 ret = 0;
> + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
> +
> + if ((ret & 0xC00) == 0x800) {
> + printk(KERN_INFO "Found NAND on CS%d\n", cs);
> + if (nandcs > GPMC_CS_NUM)
> + nandcs = cs;
> + }
> + cs++;
> + }
> +
> + if (nandcs > GPMC_CS_NUM) {
> + printk(KERN_INFO "NAND: Unable to find configuration "
> + "in GPMC\n ");
> + return;
> + }
> +
> + if (nandcs < GPMC_CS_NUM) {
> + overo_nand_data.cs = nandcs;
> + overo_nand_data.gpmc_cs_baseaddr = (void *)
> + (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
> + overo_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add);
> +
> + printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
> + if (platform_device_register(&overo_nand_device) < 0)
> + printk(KERN_ERR "Unable to register NAND device\n");
> + }
> +}
> +static struct omap_uart_config overo_uart_config __initdata = {
> + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
> +};
> +
> +static int __init overo_i2c_init(void)
> +{
> + /* i2c2 pins are used for gpio */
> + omap_register_i2c_bus(3, 400, NULL, 0);
> + return 0;
> +}
> +
> +static void __init overo_init_irq(void)
> +{
> + omap_init_irq();
> + omap_gpio_init();
> +}
> +
> +static struct platform_device overo_lcd_device = {
> + .name = "overo_lcd",
> + .id = -1,
> +};
> +
> +static struct omap_lcd_config overo_lcd_config __initdata = {
> + .ctrl_name = "internal",
> +};
> +
> +static struct omap_board_config_kernel overo_config[] __initdata = {
> + { OMAP_TAG_UART, &overo_uart_config },
> + { OMAP_TAG_LCD, &overo_lcd_config },
> +};
> +
> +static struct platform_device *overo_devices[] __initdata = {
> + &overo_lcd_device,
> +};
> +
> +static void __init overo_init(void)
> +{
> + overo_i2c_init();
> + platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
> + omap_board_config = overo_config;
> + omap_board_config_size = ARRAY_SIZE(overo_config);
> + omap_serial_init();
> + overo_flash_init();
> +
> + if ((gpio_request(OVERO_GPIO_W2W_NRESET,
> + "OVERO_GPIO_W2W_NRESET") == 0) &&
> + (gpio_direction_output(OVERO_GPIO_W2W_NRESET, 1) == 0)) {
> + gpio_export(OVERO_GPIO_W2W_NRESET, 0);
> + gpio_set_value(OVERO_GPIO_W2W_NRESET, 0);
> + udelay(10);
> + gpio_set_value(OVERO_GPIO_W2W_NRESET, 1);
> + } else {
> + printk(KERN_ERR "could not obtain gpio for "
> + "OVERO_GPIO_W2W_NRESET\n");
> + }
> +
> + if ((gpio_request(OVERO_GPIO_BT_NRESET, "OVERO_GPIO_BT_NRESET") == 0) &&
> + (gpio_direction_output(OVERO_GPIO_BT_NRESET, 1) == 0)) {
> + gpio_export(OVERO_GPIO_BT_NRESET, 0);
> + gpio_set_value(OVERO_GPIO_BT_NRESET, 0);
> + mdelay(6);
> + gpio_set_value(OVERO_GPIO_BT_NRESET, 1);
> + } else {
> + printk(KERN_ERR "could not obtain gpio for "
> + "OVERO_GPIO_BT_NRESET\n");
> + }
> +
> + if ((gpio_request(OVERO_GPIO_USBH_CPEN, "OVERO_GPIO_USBH_CPEN") == 0) &&
> + (gpio_direction_output(OVERO_GPIO_USBH_CPEN, 1) == 0))
> + gpio_export(OVERO_GPIO_USBH_CPEN, 0);
> + else
> + printk(KERN_ERR "could not obtain gpio for "
> + "OVERO_GPIO_USBH_CPEN\n");
> +
> + if ((gpio_request(OVERO_GPIO_USBH_NRESET,
> + "OVERO_GPIO_USBH_NRESET") == 0) &&
> + (gpio_direction_output(OVERO_GPIO_USBH_NRESET, 1) == 0))
> + gpio_export(OVERO_GPIO_USBH_NRESET, 0);
> + else
> + printk(KERN_ERR "could not obtain gpio for "
> + "OVERO_GPIO_USBH_NRESET\n");
> +}
> +
> +static void __init overo_map_io(void)
> +{
> + omap2_set_globals_343x();
> + omap2_map_common_io();
> +}
> +
> +MACHINE_START(OVERO, "Gumstix Overo")
> + .phys_io = 0x48000000,
> + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
> + .boot_params = 0x80000100,
> + .map_io = overo_map_io,
> + .init_irq = overo_init_irq,
> + .init_machine = overo_init,
> + .timer = &omap_timer,
> +MACHINE_END
> diff --git a/arch/arm/plat-omap/include/mach/board-overo.h
> b/arch/arm/plat-omap/include/mach/board-overo.h
> new file mode 100644
> index 0000000..b70f22a
> --- /dev/null
> +++ b/arch/arm/plat-omap/include/mach/board-overo.h
> @@ -0,0 +1,25 @@
> +/*
> + * board-overo.h (Gumstix Overo)
> + *
> + * Initial code: Steve Sakoman <[EMAIL PROTECTED]>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#ifndef __ASM_ARCH_OVERO_H
> +#define __ASM_ARCH_OVERO_H
> +
> +#define OVERO_GPIO_W2W_NRESET 16
> +#define OVERO_GPIO_BT_NRESET 164
> +#define OVERO_GPIO_USBH_CPEN 168
> +#define OVERO_GPIO_USBH_NRESET 183
> +
> +#endif /* ____ASM_ARCH_OVERO_H */
> +
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [EMAIL PROTECTED]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
