From: David Brownell <[EMAIL PROTECTED]>
A variety of twl4030-core cleanups:
- SIH register declarations moved from core.c to twl4030.h, for
keypad, madc, bci; this decouples from twl4030-madc.h; add
several omitted register decls; remove a duplicate.
- Use a global "inuse" flag, not a per-slave one;
- Remove pointless SLAVENUM_NUM symbols; just use 0/1/2/3
- Comments:
* Add comments: header, register values
* Add some section delimiters
* Correct clock init and other comments
- Minor stuff:
* Group some variables and code with sibling
* Make clock init a bit simpler
* List twl5030 in supported i2c chips list
* Remove needless "return;"
And one IRQ-related bugfix: if the I2C timeout bug strikes while
reading PIH interrupt status, force an immediate retry. Otherwise
the twl4030 IRQ will never get re-enabled...
Object size shrinks by 180 bytes, w00t!
Signed-off-by: David Brownell <[EMAIL PROTECTED]>
---
drivers/mfd/twl4030-core.c | 263 ++++++++++++++++++-------------------
include/linux/i2c/twl4030-madc.h | 8 -
include/linux/i2c/twl4030.h | 51 +++++++
3 files changed, 181 insertions(+), 141 deletions(-)
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -39,7 +39,20 @@
#include <linux/i2c.h>
#include <linux/i2c/twl4030.h>
-#include <linux/i2c/twl4030-madc.h>
+
+
+/*
+ * The TWL4030 "Triton 2" is one of a family of a multi-function "Power
+ * Management and System Companion Device" chips originally designed for
+ * use in OMAP2 and OMAP 3 based systems. Its control interfaces use I2C,
+ * often at around 3 Mbit/sec, including for interrupt handling.
+ *
+ * This driver core provides genirq support for the interrupts emitted,
+ * by the various modules, and exports register access primitives.
+ *
+ * FIXME this driver currently requires use of the first interrupt line
+ * (and associated registers).
+ */
#define DRIVER_NAME "twl4030"
@@ -108,23 +121,20 @@ static inline void activate_irq(int irq)
#define TWL4030_NUM_SLAVES 4
-/* Slave address */
-#define TWL4030_SLAVENUM_NUM0 0x00
-#define TWL4030_SLAVENUM_NUM1 0x01
-#define TWL4030_SLAVENUM_NUM2 0x02
-#define TWL4030_SLAVENUM_NUM3 0x03
-/* Base Address defns */
-/* USB ID */
+/* Base Address defns for twl4030_map[] */
+
+/* subchip/slave 0 - USB ID */
#define TWL4030_BASEADD_USB 0x0000
-/* AUD ID */
+
+/* subchip/slave 1 - AUD ID */
#define TWL4030_BASEADD_AUDIO_VOICE 0x0000
#define TWL4030_BASEADD_GPIO 0x0098
-
#define TWL4030_BASEADD_INTBR 0x0085
#define TWL4030_BASEADD_PIH 0x0080
#define TWL4030_BASEADD_TEST 0x004C
-/* AUX ID */
+
+/* subchip/slave 2 - AUX ID */
#define TWL4030_BASEADD_INTERRUPTS 0x00B9
#define TWL4030_BASEADD_LED 0x00EE
#define TWL4030_BASEADD_MADC 0x0000
@@ -135,7 +145,8 @@ static inline void activate_irq(int irq)
#define TWL4030_BASEADD_PWMA 0x00EF
#define TWL4030_BASEADD_PWMB 0x00F1
#define TWL4030_BASEADD_KEYPAD 0x00D2
-/* POWER ID */
+
+/* subchip/slave 3 - POWER ID */
#define TWL4030_BASEADD_BACKUP 0x0014
#define TWL4030_BASEADD_INT 0x002E
#define TWL4030_BASEADD_PM_MASTER 0x0036
@@ -143,44 +154,26 @@ static inline void activate_irq(int irq)
#define TWL4030_BASEADD_RTC 0x001C
#define TWL4030_BASEADD_SECURED_REG 0x0000
-/* TWL4030 BCI registers */
-#define TWL4030_INTERRUPTS_BCIIMR1A 0x2
-#define TWL4030_INTERRUPTS_BCIIMR2A 0x3
-#define TWL4030_INTERRUPTS_BCIIMR1B 0x6
-#define TWL4030_INTERRUPTS_BCIIMR2B 0x7
-#define TWL4030_INTERRUPTS_BCIISR1A 0x0
-#define TWL4030_INTERRUPTS_BCIISR2A 0x1
-#define TWL4030_INTERRUPTS_BCIISR1B 0x4
-#define TWL4030_INTERRUPTS_BCIISR2B 0x5
-
-/* TWL4030 keypad registers */
-#define TWL4030_KEYPAD_KEYP_IMR1 0x12
-#define TWL4030_KEYPAD_KEYP_IMR2 0x14
-#define TWL4030_KEYPAD_KEYP_ISR1 0x11
-#define TWL4030_KEYPAD_KEYP_ISR2 0x13
-
-
/* Triton Core internal information (END) */
+
/* Few power values */
#define R_CFG_BOOT 0x05
#define R_PROTECT_KEY 0x0E
-/* access control */
+/* access control values for R_PROTECT_KEY */
#define KEY_UNLOCK1 0xce
#define KEY_UNLOCK2 0xec
#define KEY_LOCK 0x00
+/* some fields in R_CFG_BOOT */
#define HFCLK_FREQ_19p2_MHZ (1 << 0)
#define HFCLK_FREQ_26_MHZ (2 << 0)
#define HFCLK_FREQ_38p4_MHZ (3 << 0)
#define HIGH_PERF_SQ (1 << 3)
-/* SIH_CTRL registers that aren't defined elsewhere */
-#define TWL4030_INTERRUPTS_BCISIHCTRL 0x0d
-#define TWL4030_MADC_MADC_SIH_CTRL 0x67
-#define TWL4030_KEYPAD_KEYP_SIH_CTRL 0x17
+/*----------------------------------------------------------------------*/
/**
* struct twl4030_mod_iregs - TWL module IMR/ISR regs to mask/clear at init
@@ -291,7 +284,7 @@ static const struct twl4030_mod_iregs __
},
{
.mod_no = TWL4030_MODULE_MADC,
- .sih_ctrl = TWL4030_MADC_MADC_SIH_CTRL,
+ .sih_ctrl = TWL4030_MADC_SIH_CTRL,
.reg_cnt = ARRAY_SIZE(twl4030_madc_imr_regs),
.imrs = twl4030_madc_imr_regs,
.isrs = twl4030_madc_isr_regs,
@@ -312,16 +305,15 @@ static const struct twl4030_mod_iregs __
},
};
+/*----------------------------------------------------------------*/
-/* Data Structures */
-/* To have info on T2 IRQ substem activated or not */
-static struct completion irq_event;
+/* is driver active, bound to a chip? */
+static bool inuse;
-/* Structure to define on TWL4030 Slave ID */
+/* Structure for each TWL4030 Slave */
struct twl4030_client {
struct i2c_client *client;
u8 address;
- bool inuse;
/* max numb of i2c_msg required is for read =2 */
struct i2c_msg xfer_msg[2];
@@ -330,13 +322,15 @@ struct twl4030_client {
struct mutex xfer_lock;
};
-/* Module Mapping */
+static struct twl4030_client twl4030_modules[TWL4030_NUM_SLAVES];
+
+
+/* mapping the module id to slave id and base address */
struct twl4030mapping {
unsigned char sid; /* Slave ID */
unsigned char base; /* base address */
};
-/* mapping the module id to slave id and base address */
static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = {
/*
* NOTE: don't change this table without updating the
@@ -344,38 +338,39 @@ static struct twl4030mapping twl4030_map
* so they continue to match the order in this table.
*/
- { TWL4030_SLAVENUM_NUM0, TWL4030_BASEADD_USB },
+ { 0, TWL4030_BASEADD_USB },
- { TWL4030_SLAVENUM_NUM1, TWL4030_BASEADD_AUDIO_VOICE },
- { TWL4030_SLAVENUM_NUM1, TWL4030_BASEADD_GPIO },
- { TWL4030_SLAVENUM_NUM1, TWL4030_BASEADD_INTBR },
- { TWL4030_SLAVENUM_NUM1, TWL4030_BASEADD_PIH },
- { TWL4030_SLAVENUM_NUM1, TWL4030_BASEADD_TEST },
+ { 1, TWL4030_BASEADD_AUDIO_VOICE },
+ { 1, TWL4030_BASEADD_GPIO },
+ { 1, TWL4030_BASEADD_INTBR },
+ { 1, TWL4030_BASEADD_PIH },
+ { 1, TWL4030_BASEADD_TEST },
- { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_KEYPAD },
- { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_MADC },
- { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_INTERRUPTS },
- { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_LED },
- { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_MAIN_CHARGE },
- { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_PRECHARGE },
- { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_PWM0 },
- { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_PWM1 },
- { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_PWMA },
- { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_PWMB },
+ { 2, TWL4030_BASEADD_KEYPAD },
+ { 2, TWL4030_BASEADD_MADC },
+ { 2, TWL4030_BASEADD_INTERRUPTS },
+ { 2, TWL4030_BASEADD_LED },
+ { 2, TWL4030_BASEADD_MAIN_CHARGE },
+ { 2, TWL4030_BASEADD_PRECHARGE },
+ { 2, TWL4030_BASEADD_PWM0 },
+ { 2, TWL4030_BASEADD_PWM1 },
+ { 2, TWL4030_BASEADD_PWMA },
+ { 2, TWL4030_BASEADD_PWMB },
- { TWL4030_SLAVENUM_NUM3, TWL4030_BASEADD_BACKUP },
- { TWL4030_SLAVENUM_NUM3, TWL4030_BASEADD_INT },
- { TWL4030_SLAVENUM_NUM3, TWL4030_BASEADD_PM_MASTER },
- { TWL4030_SLAVENUM_NUM3, TWL4030_BASEADD_PM_RECEIVER },
- { TWL4030_SLAVENUM_NUM3, TWL4030_BASEADD_RTC },
- { TWL4030_SLAVENUM_NUM3, TWL4030_BASEADD_SECURED_REG },
+ { 3, TWL4030_BASEADD_BACKUP },
+ { 3, TWL4030_BASEADD_INT },
+ { 3, TWL4030_BASEADD_PM_MASTER },
+ { 3, TWL4030_BASEADD_PM_RECEIVER },
+ { 3, TWL4030_BASEADD_RTC },
+ { 3, TWL4030_BASEADD_SECURED_REG },
};
-static struct twl4030_client twl4030_modules[TWL4030_NUM_SLAVES];
+/*----------------------------------------------------------------------*/
/*
* TWL4030 doesn't have PIH mask, hence dummy function for mask
- * and unmask.
+ * and unmask of the (eight) interrupts reported at that level ...
+ * masking is only available from SIH (secondary) modules.
*/
static void twl4030_i2c_ackirq(unsigned int irq)
@@ -390,7 +385,6 @@ static void twl4030_i2c_enableint(unsign
{
}
-/* information for processing in the Work Item */
static struct irq_chip twl4030_irq_chip = {
.name = "twl4030",
.ack = twl4030_i2c_ackirq,
@@ -398,7 +392,9 @@ static struct irq_chip twl4030_irq_chip
.unmask = twl4030_i2c_enableint,
};
-/* Global Functions */
+/*----------------------------------------------------------------------*/
+
+/* Exported Functions */
/**
* twl4030_i2c_write - Writes a n bit register in TWL4030
@@ -426,7 +422,7 @@ int twl4030_i2c_write(u8 mod_no, u8 *val
sid = twl4030_map[mod_no].sid;
twl = &twl4030_modules[sid];
- if (unlikely(!twl->inuse)) {
+ if (unlikely(!inuse)) {
pr_err("%s: client %d is not initialized\n", DRIVER_NAME, sid);
return -EPERM;
}
@@ -476,7 +472,7 @@ int twl4030_i2c_read(u8 mod_no, u8 *valu
sid = twl4030_map[mod_no].sid;
twl = &twl4030_modules[sid];
- if (unlikely(!twl->inuse)) {
+ if (unlikely(!inuse)) {
pr_err("%s: client %d is not initialized\n", DRIVER_NAME, sid);
return -EPERM;
}
@@ -537,12 +533,12 @@ int twl4030_i2c_read_u8(u8 mod_no, u8 *v
}
EXPORT_SYMBOL(twl4030_i2c_read_u8);
-/* Helper Functions */
+/*----------------------------------------------------------------------*/
/*
* do_twl4030_module_irq() is the desc->handle method for each of the twl4030
- * module interrupts. It executes in kernel thread context.
- * On entry, cpu interrupts are disabled.
+ * module interrupts that doesn't chain to another irq_chip (GPIO, power, etc).
+ * It executes in kernel thread context. On entry, cpu interrupts are
disabled.
*/
static void do_twl4030_module_irq(unsigned int irq, irq_desc_t *desc)
{
@@ -603,10 +599,10 @@ static void do_twl4030_module_irq(unsign
static unsigned twl4030_irq_base;
+static struct completion irq_event;
+
/*
- * twl4030_irq_thread() runs as a kernel thread. It queries the twl4030
- * interrupt controller to see which modules are generating interrupt requests
- * and then calls the desc->handle method for each module requesting service.
+ * This thread processes interrupts reported by the Primary Interrupt Handler.
*/
static int twl4030_irq_thread(void *data)
{
@@ -623,34 +619,36 @@ static int twl4030_irq_thread(void *data
int module_irq;
u8 pih_isr;
+ /* Wait for IRQ, then read PIH irq status (also blocking) */
wait_for_completion_interruptible(&irq_event);
ret = twl4030_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr,
REG_PIH_ISR_P1);
if (ret) {
- printk(KERN_WARNING "I2C error %d while reading TWL4030"
- " PIH ISR register.\n", ret);
+ pr_warning("%s: I2C error %d reading PIH ISR\n",
+ DRIVER_NAME, ret);
if (++i2c_errors >= max_i2c_errors) {
printk(KERN_ERR "Maximum I2C error count"
" exceeded. Terminating %s.\n",
__func__);
break;
}
+ complete(&irq_event);
continue;
}
- for (module_irq = twl4030_irq_base; 0 != pih_isr;
- pih_isr >>= 1, module_irq++) {
+ /* these handlers deal with the relevant SIH irq status */
+ local_irq_disable();
+ for (module_irq = twl4030_irq_base;
+ pih_isr;
+ pih_isr >>= 1, module_irq++) {
if (pih_isr & 0x1) {
irq_desc_t *d = irq_desc + module_irq;
- local_irq_disable();
-
d->handle_irq(module_irq, d);
-
- local_irq_enable();
}
}
+ local_irq_enable();
desc->chip->unmask(irq);
}
@@ -688,6 +686,22 @@ static void do_twl4030_irq(unsigned int
}
}
+static struct task_struct * __init start_twl4030_irq_thread(long irq)
+{
+ struct task_struct *thread;
+
+ init_completion(&irq_event);
+ thread = kthread_run(twl4030_irq_thread, (void *)irq,
+ "twl4030 irq %ld", irq);
+ if (!thread)
+ pr_err("%s: could not create twl4030 irq %ld thread!\n",
+ DRIVER_NAME, irq);
+
+ return thread;
+}
+
+/*----------------------------------------------------------------------*/
+
static int add_children(struct twl4030_platform_data *pdata)
{
struct platform_device *pdev = NULL;
@@ -695,7 +709,7 @@ static int add_children(struct twl4030_p
int status = 0;
if (twl_has_bci() && pdata->bci) {
- twl = &twl4030_modules[TWL4030_SLAVENUM_NUM3];
+ twl = &twl4030_modules[3];
pdev = platform_device_alloc("twl4030_bci", -1);
if (!pdev) {
@@ -738,7 +752,7 @@ static int add_children(struct twl4030_p
}
if (twl_has_gpio() && pdata->gpio) {
- twl = &twl4030_modules[TWL4030_SLAVENUM_NUM1];
+ twl = &twl4030_modules[1];
pdev = platform_device_alloc("twl4030_gpio", -1);
if (!pdev) {
@@ -787,7 +801,7 @@ static int add_children(struct twl4030_p
if (twl_has_keypad() && pdata->keypad) {
pdev = platform_device_alloc("twl4030_keypad", -1);
if (pdev) {
- twl = &twl4030_modules[TWL4030_SLAVENUM_NUM2];
+ twl = &twl4030_modules[2];
pdev->dev.parent = &twl->client->dev;
device_init_wakeup(&pdev->dev, 1);
status = platform_device_add_data(pdev, pdata->keypad,
@@ -817,7 +831,7 @@ static int add_children(struct twl4030_p
if (twl_has_madc() && pdata->madc) {
pdev = platform_device_alloc("twl4030_madc", -1);
if (pdev) {
- twl = &twl4030_modules[TWL4030_SLAVENUM_NUM2];
+ twl = &twl4030_modules[2];
pdev->dev.parent = &twl->client->dev;
device_init_wakeup(&pdev->dev, 1);
status = platform_device_add_data(pdev, pdata->madc,
@@ -845,7 +859,7 @@ static int add_children(struct twl4030_p
}
if (twl_has_rtc()) {
- twl = &twl4030_modules[TWL4030_SLAVENUM_NUM3];
+ twl = &twl4030_modules[3];
pdev = platform_device_alloc("twl4030_rtc", -1);
if (!pdev) {
@@ -888,7 +902,7 @@ static int add_children(struct twl4030_p
}
if (twl_has_usb() && pdata->usb) {
- twl = &twl4030_modules[TWL4030_SLAVENUM_NUM0];
+ twl = &twl4030_modules[0];
pdev = platform_device_alloc("twl4030_usb", -1);
if (!pdev) {
@@ -937,25 +951,14 @@ err:
return status;
}
-static struct task_struct * __init start_twl4030_irq_thread(long irq)
-{
- struct task_struct *thread;
-
- init_completion(&irq_event);
- thread = kthread_run(twl4030_irq_thread, (void *)irq,
- "twl4030 irq %ld", irq);
- if (!thread)
- pr_err("%s: could not create twl4030 irq %ld thread!\n",
- DRIVER_NAME, irq);
-
- return thread;
-}
+/*----------------------------------------------------------------------*/
/*
- * These three functions should be part of Voltage frame work
- * added here to complete the functionality for now.
+ * These three functions initialize the on-chip clock framework,
+ * letting it generate the right frequencies for USB, MADC, and
+ * other purposes.
*/
-static int __init protect_pm_master(void)
+static inline int __init protect_pm_master(void)
{
int e = 0;
@@ -964,7 +967,7 @@ static int __init protect_pm_master(void
return e;
}
-static int __init unprotect_pm_master(void)
+static inline int __init unprotect_pm_master(void)
{
int e = 0;
@@ -975,7 +978,7 @@ static int __init unprotect_pm_master(vo
return e;
}
-static int __init power_companion_init(void)
+static void __init clocks_init(void)
{
int e = 0;
struct clk *osc;
@@ -988,12 +991,15 @@ static int __init power_companion_init(v
else
osc = clk_get(NULL, "osc_sys_ck");
#else
+ /* REVISIT for non-OMAP systems, pass the clock rate from
+ * board init code, using platform_data.
+ */
osc = ERR_PTR(-EIO);
#endif
if (IS_ERR(osc)) {
printk(KERN_WARNING "Skipping twl4030 internal clock init and "
"using bootloader value (unknown osc rate)\n");
- return 0;
+ return;
}
rate = clk_get_rate(osc);
@@ -1017,9 +1023,12 @@ static int __init power_companion_init(v
e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, ctrl, R_CFG_BOOT);
e |= protect_pm_master();
- return e;
+ if (e < 0)
+ pr_err("%s: clock init err [%d]\n", DRIVER_NAME, e);
}
+/*----------------------------------------------------------------------*/
+
/**
* twl4030_i2c_clear_isr - clear TWL4030 SIH ISR regs via read + write
* @mod_no: TWL4030 module number
@@ -1098,16 +1107,12 @@ static void __init twl4030_mask_clear_in
tmr.isrs[j], cor) < 0);
}
}
-
- return;
}
static void twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
{
int i;
- int res = 0;
- char *msg = "Unable to register interrupt subsystem";
/*
* Mask and clear all TWL4030 interrupts since initially we do
@@ -1127,12 +1132,7 @@ static void twl_init_irq(int irq_num, un
/* install an irq handler to demultiplex the TWL4030 interrupt */
set_irq_data(irq_num, start_twl4030_irq_thread(irq_num));
- set_irq_type(irq_num, IRQ_TYPE_EDGE_FALLING);
set_irq_chained_handler(irq_num, do_twl4030_irq);
-
- res = power_companion_init();
- if (res < 0)
- pr_err("%s: %s[%d]\n", DRIVER_NAME, msg, res);
}
/*----------------------------------------------------------------------*/
@@ -1153,8 +1153,8 @@ static int twl4030_remove(struct i2c_cli
if (twl->client && twl->client != client)
i2c_unregister_device(twl->client);
twl4030_modules[i].client = NULL;
- twl4030_modules[i].inuse = false;
}
+ inuse = false;
return 0;
}
@@ -1176,11 +1176,9 @@ twl4030_probe(struct i2c_client *client,
return -EIO;
}
- for (i = 0; i < TWL4030_NUM_SLAVES; i++) {
- if (twl4030_modules[i].inuse || twl4030_irq_base) {
- dev_dbg(&client->dev, "driver is already in use\n");
- return -EBUSY;
- }
+ if (inuse || twl4030_irq_base) {
+ dev_dbg(&client->dev, "driver is already in use\n");
+ return -EBUSY;
}
for (i = 0; i < TWL4030_NUM_SLAVES; i++) {
@@ -1201,17 +1199,15 @@ twl4030_probe(struct i2c_client *client,
strlcpy(twl->client->name, id->name,
sizeof(twl->client->name));
}
- twl->inuse = true;
mutex_init(&twl->xfer_lock);
}
+ inuse = true;
- /*
- * Check if the PIH module is initialized, if yes, then init
- * the T2 Interrupt subsystem
- */
- if (twl4030_modules[twl4030_map[TWL4030_MODULE_PIH].sid].inuse
- && twl4030_irq_base == 0
- && client->irq
+ /* setup clock framework */
+ clocks_init();
+
+ /* Maybe init the T2 Interrupt subsystem */
+ if (client->irq
&& pdata->irq_base
&& pdata->irq_end > pdata->irq_base) {
twl_init_irq(client->irq, pdata->irq_base, pdata->irq_end);
@@ -1231,6 +1227,7 @@ static const struct i2c_device_id twl403
{ "tps65950", 0 }, /* catalog version of twl4030 */
{ "tps65930", 0 }, /* fewer LDOs and DACs; no charger */
{ "tps65920", 0 }, /* fewer LDOs; no codec or charger */
+ { "twl5030", 0 }, /* T2 updated */
{ /* end of list */ },
};
MODULE_DEVICE_TABLE(i2c, twl4030_ids);
--- a/include/linux/i2c/twl4030-madc.h
+++ b/include/linux/i2c/twl4030-madc.h
@@ -75,14 +75,6 @@ enum sample_type {
#define TWL4030_MADC_RTCH0_LSB 0x17
#define TWL4030_MADC_GPCH0_LSB 0x37
-#define TWL4030_MADC_ISR1 0x61
-#define TWL4030_MADC_IMR1 0x62
-#define TWL4030_MADC_ISR2 0x63
-#define TWL4030_MADC_IMR2 0x64
-#define TWL4030_MADC_SIR 0x65
-#define TWL4030_MADC_EDR 0x66
-#define TWL4030_MADC_SIH_CTRL 0x67
-
#define TWL4030_MADC_MADCON (1<<0) /* MADC power on */
#define TWL4030_MADC_BUSY (1<<0) /* MADC busy */
#define TWL4030_MADC_EOC_SW (1<<1) /* MADC conversion completion */
--- a/include/linux/i2c/twl4030.h
+++ b/include/linux/i2c/twl4030.h
@@ -153,6 +153,57 @@ int twl4030_i2c_read(u8 mod_no, u8 *valu
/*----------------------------------------------------------------------*/
/*
+ * Keypad register offsets (use TWL4030_MODULE_KEYPAD)
+ * ... SIH/interrupt only
+ */
+
+#define TWL4030_KEYPAD_KEYP_ISR1 0x11
+#define TWL4030_KEYPAD_KEYP_IMR1 0x12
+#define TWL4030_KEYPAD_KEYP_ISR2 0x13
+#define TWL4030_KEYPAD_KEYP_IMR2 0x14
+#define TWL4030_KEYPAD_KEYP_SIR 0x15 /* test register */
+#define TWL4030_KEYPAD_KEYP_EDR 0x16
+#define TWL4030_KEYPAD_KEYP_SIH_CTRL 0x17
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Multichannel ADC register offsets (use TWL4030_MODULE_MADC)
+ * ... SIH/interrupt only
+ */
+
+#define TWL4030_MADC_ISR1 0x61
+#define TWL4030_MADC_IMR1 0x62
+#define TWL4030_MADC_ISR2 0x63
+#define TWL4030_MADC_IMR2 0x64
+#define TWL4030_MADC_SIR 0x65 /* test register */
+#define TWL4030_MADC_EDR 0x66
+#define TWL4030_MADC_SIH_CTRL 0x67
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Battery charger register offsets (use TWL4030_MODULE_INTERRUPTS)
+ */
+
+#define TWL4030_INTERRUPTS_BCIISR1A 0x0
+#define TWL4030_INTERRUPTS_BCIISR2A 0x1
+#define TWL4030_INTERRUPTS_BCIIMR1A 0x2
+#define TWL4030_INTERRUPTS_BCIIMR2A 0x3
+#define TWL4030_INTERRUPTS_BCIISR1B 0x4
+#define TWL4030_INTERRUPTS_BCIISR2B 0x5
+#define TWL4030_INTERRUPTS_BCIIMR1B 0x6
+#define TWL4030_INTERRUPTS_BCIIMR2B 0x7
+#define TWL4030_INTERRUPTS_BCISIR1 0x8 /* test register */
+#define TWL4030_INTERRUPTS_BCISIR2 0x9 /* test register */
+#define TWL4030_INTERRUPTS_BCIEDR1 0xa
+#define TWL4030_INTERRUPTS_BCIEDR2 0xb
+#define TWL4030_INTERRUPTS_BCIEDR3 0xc
+#define TWL4030_INTERRUPTS_BCISIHCTRL 0xd
+
+/*----------------------------------------------------------------------*/
+
+/*
* Power Interrupt block register offsets (use TWL4030_MODULE_INT)
*/
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
