On Fri, Oct 03, 2008 at 09:00:48AM -0700, David Brownell wrote:
> From: David Brownell <[EMAIL PROTECTED]>
>
> A variety of twl4030-core cleanups:
>
> - SIH register declarations moved from core.c to twl4030.h, for
> keypad, madc, bci; this decouples from twl4030-madc.h; add
> several omitted register decls; remove a duplicate.
>
> - Use a global "inuse" flag, not a per-slave one;
>
> - Remove pointless SLAVENUM_NUM symbols; just use 0/1/2/3
>
> - Comments:
> * Add comments: header, register values
> * Add some section delimiters
> * Correct clock init and other comments
>
> - Minor stuff:
> * Group some variables and code with sibling
> * Make clock init a bit simpler
> * List twl5030 in supported i2c chips list
> * Remove needless "return;"
>
> And one IRQ-related bugfix: if the I2C timeout bug strikes while
> reading PIH interrupt status, force an immediate retry. Otherwise
> the twl4030 IRQ will never get re-enabled...
>
> Object size shrinks by 180 bytes, w00t!
>
> Signed-off-by: David Brownell <[EMAIL PROTECTED]>
would be nice to have the patch moving tlw4030-core to drivers/mfd
coming from you so we know everything is fine.
> ---
> drivers/mfd/twl4030-core.c | 263 ++++++++++++++++++-------------------
> include/linux/i2c/twl4030-madc.h | 8 -
> include/linux/i2c/twl4030.h | 51 +++++++
> 3 files changed, 181 insertions(+), 141 deletions(-)
>
> --- a/drivers/mfd/twl4030-core.c
> +++ b/drivers/mfd/twl4030-core.c
> @@ -39,7 +39,20 @@
>
> #include <linux/i2c.h>
> #include <linux/i2c/twl4030.h>
> -#include <linux/i2c/twl4030-madc.h>
> +
> +
> +/*
> + * The TWL4030 "Triton 2" is one of a family of a multi-function "Power
> + * Management and System Companion Device" chips originally designed for
> + * use in OMAP2 and OMAP 3 based systems. Its control interfaces use I2C,
> + * often at around 3 Mbit/sec, including for interrupt handling.
> + *
> + * This driver core provides genirq support for the interrupts emitted,
> + * by the various modules, and exports register access primitives.
> + *
> + * FIXME this driver currently requires use of the first interrupt line
> + * (and associated registers).
> + */
>
> #define DRIVER_NAME "twl4030"
>
> @@ -108,23 +121,20 @@ static inline void activate_irq(int irq)
>
> #define TWL4030_NUM_SLAVES 4
>
> -/* Slave address */
> -#define TWL4030_SLAVENUM_NUM0 0x00
> -#define TWL4030_SLAVENUM_NUM1 0x01
> -#define TWL4030_SLAVENUM_NUM2 0x02
> -#define TWL4030_SLAVENUM_NUM3 0x03
>
> -/* Base Address defns */
> -/* USB ID */
> +/* Base Address defns for twl4030_map[] */
> +
> +/* subchip/slave 0 - USB ID */
> #define TWL4030_BASEADD_USB 0x0000
> -/* AUD ID */
> +
> +/* subchip/slave 1 - AUD ID */
> #define TWL4030_BASEADD_AUDIO_VOICE 0x0000
> #define TWL4030_BASEADD_GPIO 0x0098
> -
> #define TWL4030_BASEADD_INTBR 0x0085
> #define TWL4030_BASEADD_PIH 0x0080
> #define TWL4030_BASEADD_TEST 0x004C
> -/* AUX ID */
> +
> +/* subchip/slave 2 - AUX ID */
> #define TWL4030_BASEADD_INTERRUPTS 0x00B9
> #define TWL4030_BASEADD_LED 0x00EE
> #define TWL4030_BASEADD_MADC 0x0000
> @@ -135,7 +145,8 @@ static inline void activate_irq(int irq)
> #define TWL4030_BASEADD_PWMA 0x00EF
> #define TWL4030_BASEADD_PWMB 0x00F1
> #define TWL4030_BASEADD_KEYPAD 0x00D2
> -/* POWER ID */
> +
> +/* subchip/slave 3 - POWER ID */
> #define TWL4030_BASEADD_BACKUP 0x0014
> #define TWL4030_BASEADD_INT 0x002E
> #define TWL4030_BASEADD_PM_MASTER 0x0036
> @@ -143,44 +154,26 @@ static inline void activate_irq(int irq)
> #define TWL4030_BASEADD_RTC 0x001C
> #define TWL4030_BASEADD_SECURED_REG 0x0000
>
> -/* TWL4030 BCI registers */
> -#define TWL4030_INTERRUPTS_BCIIMR1A 0x2
> -#define TWL4030_INTERRUPTS_BCIIMR2A 0x3
> -#define TWL4030_INTERRUPTS_BCIIMR1B 0x6
> -#define TWL4030_INTERRUPTS_BCIIMR2B 0x7
> -#define TWL4030_INTERRUPTS_BCIISR1A 0x0
> -#define TWL4030_INTERRUPTS_BCIISR2A 0x1
> -#define TWL4030_INTERRUPTS_BCIISR1B 0x4
> -#define TWL4030_INTERRUPTS_BCIISR2B 0x5
> -
> -/* TWL4030 keypad registers */
> -#define TWL4030_KEYPAD_KEYP_IMR1 0x12
> -#define TWL4030_KEYPAD_KEYP_IMR2 0x14
> -#define TWL4030_KEYPAD_KEYP_ISR1 0x11
> -#define TWL4030_KEYPAD_KEYP_ISR2 0x13
> -
> -
> /* Triton Core internal information (END) */
>
> +
> /* Few power values */
> #define R_CFG_BOOT 0x05
> #define R_PROTECT_KEY 0x0E
>
> -/* access control */
> +/* access control values for R_PROTECT_KEY */
> #define KEY_UNLOCK1 0xce
> #define KEY_UNLOCK2 0xec
> #define KEY_LOCK 0x00
>
> +/* some fields in R_CFG_BOOT */
> #define HFCLK_FREQ_19p2_MHZ (1 << 0)
> #define HFCLK_FREQ_26_MHZ (2 << 0)
> #define HFCLK_FREQ_38p4_MHZ (3 << 0)
> #define HIGH_PERF_SQ (1 << 3)
>
> -/* SIH_CTRL registers that aren't defined elsewhere */
> -#define TWL4030_INTERRUPTS_BCISIHCTRL 0x0d
> -#define TWL4030_MADC_MADC_SIH_CTRL 0x67
> -#define TWL4030_KEYPAD_KEYP_SIH_CTRL 0x17
>
> +/*----------------------------------------------------------------------*/
>
> /**
> * struct twl4030_mod_iregs - TWL module IMR/ISR regs to mask/clear at init
> @@ -291,7 +284,7 @@ static const struct twl4030_mod_iregs __
> },
> {
> .mod_no = TWL4030_MODULE_MADC,
> - .sih_ctrl = TWL4030_MADC_MADC_SIH_CTRL,
> + .sih_ctrl = TWL4030_MADC_SIH_CTRL,
> .reg_cnt = ARRAY_SIZE(twl4030_madc_imr_regs),
> .imrs = twl4030_madc_imr_regs,
> .isrs = twl4030_madc_isr_regs,
> @@ -312,16 +305,15 @@ static const struct twl4030_mod_iregs __
> },
> };
>
> +/*----------------------------------------------------------------*/
>
> -/* Data Structures */
> -/* To have info on T2 IRQ substem activated or not */
> -static struct completion irq_event;
> +/* is driver active, bound to a chip? */
> +static bool inuse;
>
> -/* Structure to define on TWL4030 Slave ID */
> +/* Structure for each TWL4030 Slave */
> struct twl4030_client {
> struct i2c_client *client;
> u8 address;
> - bool inuse;
>
> /* max numb of i2c_msg required is for read =2 */
> struct i2c_msg xfer_msg[2];
> @@ -330,13 +322,15 @@ struct twl4030_client {
> struct mutex xfer_lock;
> };
>
> -/* Module Mapping */
> +static struct twl4030_client twl4030_modules[TWL4030_NUM_SLAVES];
> +
> +
> +/* mapping the module id to slave id and base address */
> struct twl4030mapping {
> unsigned char sid; /* Slave ID */
> unsigned char base; /* base address */
> };
>
> -/* mapping the module id to slave id and base address */
> static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = {
> /*
> * NOTE: don't change this table without updating the
> @@ -344,38 +338,39 @@ static struct twl4030mapping twl4030_map
> * so they continue to match the order in this table.
> */
>
> - { TWL4030_SLAVENUM_NUM0, TWL4030_BASEADD_USB },
> + { 0, TWL4030_BASEADD_USB },
>
> - { TWL4030_SLAVENUM_NUM1, TWL4030_BASEADD_AUDIO_VOICE },
> - { TWL4030_SLAVENUM_NUM1, TWL4030_BASEADD_GPIO },
> - { TWL4030_SLAVENUM_NUM1, TWL4030_BASEADD_INTBR },
> - { TWL4030_SLAVENUM_NUM1, TWL4030_BASEADD_PIH },
> - { TWL4030_SLAVENUM_NUM1, TWL4030_BASEADD_TEST },
> + { 1, TWL4030_BASEADD_AUDIO_VOICE },
> + { 1, TWL4030_BASEADD_GPIO },
> + { 1, TWL4030_BASEADD_INTBR },
> + { 1, TWL4030_BASEADD_PIH },
> + { 1, TWL4030_BASEADD_TEST },
>
> - { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_KEYPAD },
> - { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_MADC },
> - { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_INTERRUPTS },
> - { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_LED },
> - { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_MAIN_CHARGE },
> - { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_PRECHARGE },
> - { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_PWM0 },
> - { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_PWM1 },
> - { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_PWMA },
> - { TWL4030_SLAVENUM_NUM2, TWL4030_BASEADD_PWMB },
> + { 2, TWL4030_BASEADD_KEYPAD },
> + { 2, TWL4030_BASEADD_MADC },
> + { 2, TWL4030_BASEADD_INTERRUPTS },
> + { 2, TWL4030_BASEADD_LED },
> + { 2, TWL4030_BASEADD_MAIN_CHARGE },
> + { 2, TWL4030_BASEADD_PRECHARGE },
> + { 2, TWL4030_BASEADD_PWM0 },
> + { 2, TWL4030_BASEADD_PWM1 },
> + { 2, TWL4030_BASEADD_PWMA },
> + { 2, TWL4030_BASEADD_PWMB },
>
> - { TWL4030_SLAVENUM_NUM3, TWL4030_BASEADD_BACKUP },
> - { TWL4030_SLAVENUM_NUM3, TWL4030_BASEADD_INT },
> - { TWL4030_SLAVENUM_NUM3, TWL4030_BASEADD_PM_MASTER },
> - { TWL4030_SLAVENUM_NUM3, TWL4030_BASEADD_PM_RECEIVER },
> - { TWL4030_SLAVENUM_NUM3, TWL4030_BASEADD_RTC },
> - { TWL4030_SLAVENUM_NUM3, TWL4030_BASEADD_SECURED_REG },
> + { 3, TWL4030_BASEADD_BACKUP },
> + { 3, TWL4030_BASEADD_INT },
> + { 3, TWL4030_BASEADD_PM_MASTER },
> + { 3, TWL4030_BASEADD_PM_RECEIVER },
> + { 3, TWL4030_BASEADD_RTC },
> + { 3, TWL4030_BASEADD_SECURED_REG },
> };
>
> -static struct twl4030_client twl4030_modules[TWL4030_NUM_SLAVES];
> +/*----------------------------------------------------------------------*/
>
> /*
> * TWL4030 doesn't have PIH mask, hence dummy function for mask
> - * and unmask.
> + * and unmask of the (eight) interrupts reported at that level ...
> + * masking is only available from SIH (secondary) modules.
> */
>
> static void twl4030_i2c_ackirq(unsigned int irq)
> @@ -390,7 +385,6 @@ static void twl4030_i2c_enableint(unsign
> {
> }
>
> -/* information for processing in the Work Item */
> static struct irq_chip twl4030_irq_chip = {
> .name = "twl4030",
> .ack = twl4030_i2c_ackirq,
> @@ -398,7 +392,9 @@ static struct irq_chip twl4030_irq_chip
> .unmask = twl4030_i2c_enableint,
> };
>
> -/* Global Functions */
> +/*----------------------------------------------------------------------*/
> +
> +/* Exported Functions */
>
> /**
> * twl4030_i2c_write - Writes a n bit register in TWL4030
> @@ -426,7 +422,7 @@ int twl4030_i2c_write(u8 mod_no, u8 *val
> sid = twl4030_map[mod_no].sid;
> twl = &twl4030_modules[sid];
>
> - if (unlikely(!twl->inuse)) {
> + if (unlikely(!inuse)) {
> pr_err("%s: client %d is not initialized\n", DRIVER_NAME, sid);
> return -EPERM;
> }
> @@ -476,7 +472,7 @@ int twl4030_i2c_read(u8 mod_no, u8 *valu
> sid = twl4030_map[mod_no].sid;
> twl = &twl4030_modules[sid];
>
> - if (unlikely(!twl->inuse)) {
> + if (unlikely(!inuse)) {
> pr_err("%s: client %d is not initialized\n", DRIVER_NAME, sid);
> return -EPERM;
> }
> @@ -537,12 +533,12 @@ int twl4030_i2c_read_u8(u8 mod_no, u8 *v
> }
> EXPORT_SYMBOL(twl4030_i2c_read_u8);
>
> -/* Helper Functions */
> +/*----------------------------------------------------------------------*/
>
> /*
> * do_twl4030_module_irq() is the desc->handle method for each of the twl4030
> - * module interrupts. It executes in kernel thread context.
> - * On entry, cpu interrupts are disabled.
> + * module interrupts that doesn't chain to another irq_chip (GPIO, power,
> etc).
> + * It executes in kernel thread context. On entry, cpu interrupts are
> disabled.
> */
> static void do_twl4030_module_irq(unsigned int irq, irq_desc_t *desc)
> {
> @@ -603,10 +599,10 @@ static void do_twl4030_module_irq(unsign
>
> static unsigned twl4030_irq_base;
>
> +static struct completion irq_event;
> +
> /*
> - * twl4030_irq_thread() runs as a kernel thread. It queries the twl4030
> - * interrupt controller to see which modules are generating interrupt
> requests
> - * and then calls the desc->handle method for each module requesting service.
> + * This thread processes interrupts reported by the Primary Interrupt
> Handler.
> */
> static int twl4030_irq_thread(void *data)
> {
> @@ -623,34 +619,36 @@ static int twl4030_irq_thread(void *data
> int module_irq;
> u8 pih_isr;
>
> + /* Wait for IRQ, then read PIH irq status (also blocking) */
> wait_for_completion_interruptible(&irq_event);
>
> ret = twl4030_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr,
> REG_PIH_ISR_P1);
> if (ret) {
> - printk(KERN_WARNING "I2C error %d while reading TWL4030"
> - " PIH ISR register.\n", ret);
> + pr_warning("%s: I2C error %d reading PIH ISR\n",
> + DRIVER_NAME, ret);
> if (++i2c_errors >= max_i2c_errors) {
> printk(KERN_ERR "Maximum I2C error count"
> " exceeded. Terminating %s.\n",
> __func__);
> break;
> }
> + complete(&irq_event);
> continue;
> }
>
> - for (module_irq = twl4030_irq_base; 0 != pih_isr;
> - pih_isr >>= 1, module_irq++) {
> + /* these handlers deal with the relevant SIH irq status */
> + local_irq_disable();
> + for (module_irq = twl4030_irq_base;
> + pih_isr;
> + pih_isr >>= 1, module_irq++) {
> if (pih_isr & 0x1) {
> irq_desc_t *d = irq_desc + module_irq;
>
> - local_irq_disable();
> -
> d->handle_irq(module_irq, d);
> -
> - local_irq_enable();
> }
> }
> + local_irq_enable();
>
> desc->chip->unmask(irq);
> }
> @@ -688,6 +686,22 @@ static void do_twl4030_irq(unsigned int
> }
> }
>
> +static struct task_struct * __init start_twl4030_irq_thread(long irq)
> +{
> + struct task_struct *thread;
> +
> + init_completion(&irq_event);
> + thread = kthread_run(twl4030_irq_thread, (void *)irq,
> + "twl4030 irq %ld", irq);
> + if (!thread)
> + pr_err("%s: could not create twl4030 irq %ld thread!\n",
> + DRIVER_NAME, irq);
> +
> + return thread;
> +}
> +
> +/*----------------------------------------------------------------------*/
> +
> static int add_children(struct twl4030_platform_data *pdata)
> {
> struct platform_device *pdev = NULL;
> @@ -695,7 +709,7 @@ static int add_children(struct twl4030_p
> int status = 0;
>
> if (twl_has_bci() && pdata->bci) {
> - twl = &twl4030_modules[TWL4030_SLAVENUM_NUM3];
> + twl = &twl4030_modules[3];
>
> pdev = platform_device_alloc("twl4030_bci", -1);
> if (!pdev) {
> @@ -738,7 +752,7 @@ static int add_children(struct twl4030_p
> }
>
> if (twl_has_gpio() && pdata->gpio) {
> - twl = &twl4030_modules[TWL4030_SLAVENUM_NUM1];
> + twl = &twl4030_modules[1];
>
> pdev = platform_device_alloc("twl4030_gpio", -1);
> if (!pdev) {
> @@ -787,7 +801,7 @@ static int add_children(struct twl4030_p
> if (twl_has_keypad() && pdata->keypad) {
> pdev = platform_device_alloc("twl4030_keypad", -1);
> if (pdev) {
> - twl = &twl4030_modules[TWL4030_SLAVENUM_NUM2];
> + twl = &twl4030_modules[2];
> pdev->dev.parent = &twl->client->dev;
> device_init_wakeup(&pdev->dev, 1);
> status = platform_device_add_data(pdev, pdata->keypad,
> @@ -817,7 +831,7 @@ static int add_children(struct twl4030_p
> if (twl_has_madc() && pdata->madc) {
> pdev = platform_device_alloc("twl4030_madc", -1);
> if (pdev) {
> - twl = &twl4030_modules[TWL4030_SLAVENUM_NUM2];
> + twl = &twl4030_modules[2];
> pdev->dev.parent = &twl->client->dev;
> device_init_wakeup(&pdev->dev, 1);
> status = platform_device_add_data(pdev, pdata->madc,
> @@ -845,7 +859,7 @@ static int add_children(struct twl4030_p
> }
>
> if (twl_has_rtc()) {
> - twl = &twl4030_modules[TWL4030_SLAVENUM_NUM3];
> + twl = &twl4030_modules[3];
>
> pdev = platform_device_alloc("twl4030_rtc", -1);
> if (!pdev) {
> @@ -888,7 +902,7 @@ static int add_children(struct twl4030_p
> }
>
> if (twl_has_usb() && pdata->usb) {
> - twl = &twl4030_modules[TWL4030_SLAVENUM_NUM0];
> + twl = &twl4030_modules[0];
>
> pdev = platform_device_alloc("twl4030_usb", -1);
> if (!pdev) {
> @@ -937,25 +951,14 @@ err:
> return status;
> }
>
> -static struct task_struct * __init start_twl4030_irq_thread(long irq)
> -{
> - struct task_struct *thread;
> -
> - init_completion(&irq_event);
> - thread = kthread_run(twl4030_irq_thread, (void *)irq,
> - "twl4030 irq %ld", irq);
> - if (!thread)
> - pr_err("%s: could not create twl4030 irq %ld thread!\n",
> - DRIVER_NAME, irq);
> -
> - return thread;
> -}
> +/*----------------------------------------------------------------------*/
>
> /*
> - * These three functions should be part of Voltage frame work
> - * added here to complete the functionality for now.
> + * These three functions initialize the on-chip clock framework,
> + * letting it generate the right frequencies for USB, MADC, and
> + * other purposes.
> */
> -static int __init protect_pm_master(void)
> +static inline int __init protect_pm_master(void)
> {
> int e = 0;
>
> @@ -964,7 +967,7 @@ static int __init protect_pm_master(void
> return e;
> }
>
> -static int __init unprotect_pm_master(void)
> +static inline int __init unprotect_pm_master(void)
> {
> int e = 0;
>
> @@ -975,7 +978,7 @@ static int __init unprotect_pm_master(vo
> return e;
> }
>
> -static int __init power_companion_init(void)
> +static void __init clocks_init(void)
> {
> int e = 0;
> struct clk *osc;
> @@ -988,12 +991,15 @@ static int __init power_companion_init(v
> else
> osc = clk_get(NULL, "osc_sys_ck");
> #else
> + /* REVISIT for non-OMAP systems, pass the clock rate from
> + * board init code, using platform_data.
> + */
> osc = ERR_PTR(-EIO);
> #endif
> if (IS_ERR(osc)) {
> printk(KERN_WARNING "Skipping twl4030 internal clock init and "
> "using bootloader value (unknown osc rate)\n");
> - return 0;
> + return;
> }
>
> rate = clk_get_rate(osc);
> @@ -1017,9 +1023,12 @@ static int __init power_companion_init(v
> e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, ctrl, R_CFG_BOOT);
> e |= protect_pm_master();
>
> - return e;
> + if (e < 0)
> + pr_err("%s: clock init err [%d]\n", DRIVER_NAME, e);
> }
>
> +/*----------------------------------------------------------------------*/
> +
> /**
> * twl4030_i2c_clear_isr - clear TWL4030 SIH ISR regs via read + write
> * @mod_no: TWL4030 module number
> @@ -1098,16 +1107,12 @@ static void __init twl4030_mask_clear_in
> tmr.isrs[j], cor) < 0);
> }
> }
> -
> - return;
> }
>
>
> static void twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end)
> {
> int i;
> - int res = 0;
> - char *msg = "Unable to register interrupt subsystem";
>
> /*
> * Mask and clear all TWL4030 interrupts since initially we do
> @@ -1127,12 +1132,7 @@ static void twl_init_irq(int irq_num, un
>
> /* install an irq handler to demultiplex the TWL4030 interrupt */
> set_irq_data(irq_num, start_twl4030_irq_thread(irq_num));
> - set_irq_type(irq_num, IRQ_TYPE_EDGE_FALLING);
> set_irq_chained_handler(irq_num, do_twl4030_irq);
> -
> - res = power_companion_init();
> - if (res < 0)
> - pr_err("%s: %s[%d]\n", DRIVER_NAME, msg, res);
> }
>
> /*----------------------------------------------------------------------*/
> @@ -1153,8 +1153,8 @@ static int twl4030_remove(struct i2c_cli
> if (twl->client && twl->client != client)
> i2c_unregister_device(twl->client);
> twl4030_modules[i].client = NULL;
> - twl4030_modules[i].inuse = false;
> }
> + inuse = false;
> return 0;
> }
>
> @@ -1176,11 +1176,9 @@ twl4030_probe(struct i2c_client *client,
> return -EIO;
> }
>
> - for (i = 0; i < TWL4030_NUM_SLAVES; i++) {
> - if (twl4030_modules[i].inuse || twl4030_irq_base) {
> - dev_dbg(&client->dev, "driver is already in use\n");
> - return -EBUSY;
> - }
> + if (inuse || twl4030_irq_base) {
> + dev_dbg(&client->dev, "driver is already in use\n");
> + return -EBUSY;
> }
>
> for (i = 0; i < TWL4030_NUM_SLAVES; i++) {
> @@ -1201,17 +1199,15 @@ twl4030_probe(struct i2c_client *client,
> strlcpy(twl->client->name, id->name,
> sizeof(twl->client->name));
> }
> - twl->inuse = true;
> mutex_init(&twl->xfer_lock);
> }
> + inuse = true;
>
> - /*
> - * Check if the PIH module is initialized, if yes, then init
> - * the T2 Interrupt subsystem
> - */
> - if (twl4030_modules[twl4030_map[TWL4030_MODULE_PIH].sid].inuse
> - && twl4030_irq_base == 0
> - && client->irq
> + /* setup clock framework */
> + clocks_init();
> +
> + /* Maybe init the T2 Interrupt subsystem */
> + if (client->irq
> && pdata->irq_base
> && pdata->irq_end > pdata->irq_base) {
> twl_init_irq(client->irq, pdata->irq_base, pdata->irq_end);
> @@ -1231,6 +1227,7 @@ static const struct i2c_device_id twl403
> { "tps65950", 0 }, /* catalog version of twl4030 */
> { "tps65930", 0 }, /* fewer LDOs and DACs; no charger */
> { "tps65920", 0 }, /* fewer LDOs; no codec or charger */
> + { "twl5030", 0 }, /* T2 updated */
> { /* end of list */ },
> };
> MODULE_DEVICE_TABLE(i2c, twl4030_ids);
> --- a/include/linux/i2c/twl4030-madc.h
> +++ b/include/linux/i2c/twl4030-madc.h
> @@ -75,14 +75,6 @@ enum sample_type {
> #define TWL4030_MADC_RTCH0_LSB 0x17
> #define TWL4030_MADC_GPCH0_LSB 0x37
>
> -#define TWL4030_MADC_ISR1 0x61
> -#define TWL4030_MADC_IMR1 0x62
> -#define TWL4030_MADC_ISR2 0x63
> -#define TWL4030_MADC_IMR2 0x64
> -#define TWL4030_MADC_SIR 0x65
> -#define TWL4030_MADC_EDR 0x66
> -#define TWL4030_MADC_SIH_CTRL 0x67
> -
> #define TWL4030_MADC_MADCON (1<<0) /* MADC power on */
> #define TWL4030_MADC_BUSY (1<<0) /* MADC busy */
> #define TWL4030_MADC_EOC_SW (1<<1) /* MADC conversion completion */
> --- a/include/linux/i2c/twl4030.h
> +++ b/include/linux/i2c/twl4030.h
> @@ -153,6 +153,57 @@ int twl4030_i2c_read(u8 mod_no, u8 *valu
> /*----------------------------------------------------------------------*/
>
> /*
> + * Keypad register offsets (use TWL4030_MODULE_KEYPAD)
> + * ... SIH/interrupt only
> + */
> +
> +#define TWL4030_KEYPAD_KEYP_ISR1 0x11
> +#define TWL4030_KEYPAD_KEYP_IMR1 0x12
> +#define TWL4030_KEYPAD_KEYP_ISR2 0x13
> +#define TWL4030_KEYPAD_KEYP_IMR2 0x14
> +#define TWL4030_KEYPAD_KEYP_SIR 0x15 /* test register */
> +#define TWL4030_KEYPAD_KEYP_EDR 0x16
> +#define TWL4030_KEYPAD_KEYP_SIH_CTRL 0x17
> +
> +/*----------------------------------------------------------------------*/
> +
> +/*
> + * Multichannel ADC register offsets (use TWL4030_MODULE_MADC)
> + * ... SIH/interrupt only
> + */
> +
> +#define TWL4030_MADC_ISR1 0x61
> +#define TWL4030_MADC_IMR1 0x62
> +#define TWL4030_MADC_ISR2 0x63
> +#define TWL4030_MADC_IMR2 0x64
> +#define TWL4030_MADC_SIR 0x65 /* test register */
> +#define TWL4030_MADC_EDR 0x66
> +#define TWL4030_MADC_SIH_CTRL 0x67
> +
> +/*----------------------------------------------------------------------*/
> +
> +/*
> + * Battery charger register offsets (use TWL4030_MODULE_INTERRUPTS)
> + */
> +
> +#define TWL4030_INTERRUPTS_BCIISR1A 0x0
> +#define TWL4030_INTERRUPTS_BCIISR2A 0x1
> +#define TWL4030_INTERRUPTS_BCIIMR1A 0x2
> +#define TWL4030_INTERRUPTS_BCIIMR2A 0x3
> +#define TWL4030_INTERRUPTS_BCIISR1B 0x4
> +#define TWL4030_INTERRUPTS_BCIISR2B 0x5
> +#define TWL4030_INTERRUPTS_BCIIMR1B 0x6
> +#define TWL4030_INTERRUPTS_BCIIMR2B 0x7
> +#define TWL4030_INTERRUPTS_BCISIR1 0x8 /* test register */
> +#define TWL4030_INTERRUPTS_BCISIR2 0x9 /* test register */
> +#define TWL4030_INTERRUPTS_BCIEDR1 0xa
> +#define TWL4030_INTERRUPTS_BCIEDR2 0xb
> +#define TWL4030_INTERRUPTS_BCIEDR3 0xc
> +#define TWL4030_INTERRUPTS_BCISIHCTRL 0xd
> +
> +/*----------------------------------------------------------------------*/
> +
> +/*
> * Power Interrupt block register offsets (use TWL4030_MODULE_INT)
> */
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [EMAIL PROTECTED]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
