On Fri, Oct 31, 2008 at 2:00 AM, David Brownell <[EMAIL PROTECTED]> wrote:
> On Thursday 30 October 2008, Steve Sakoman wrote:
>> > Overo has its SDIO WLAN chip (libertas) hard wired to the second
>> > controller,
>> > as I understand things ... or maybe it's the third one. :)
>>
>> Correct! The wi2wi chip is connected to mmc2 with a 4 bit data path.
>
> With the appended patch on top of Tony's four, I get:
>
> mmc1: new SDIO card at address 0001
> firmware: requesting sd8686_helper.bin
> ...
> libertas: can't load helper firmware
> libertas: failed to load helper firmware
> libertas_sdio: probe of mmc1:0001:1 failed with error -2
>
> So, progress. What's the best place to get that stuff?
> Do we know that this driver behaves with SDIO yet?
After a bit more work I now have a wireless connection!
So I guess we now have confirmation that the driver supports the
second mmc slot even for SDIO!
I used David's appended patch plus Tony's 4 HSMMC patches.
I used version 8.73.7p3 of the Marvell SD8686 firmware and helper
binaries and placed them in /lib/firmware.
The log:
mmc1: new SDIO card at address 0001
libertas_sdio: Libertas SDIO driver
libertas_sdio: Copyright Pierre Ossman
firmware: requesting sd8686_helper.bin
firmware: requesting sd8686.bin
libertas: 00:19:88:05:96:ce, fw 8.73.7p3, cap 0x00000393
libertas: PREP_CMD: command 0x00a3 failed: 2
libertas: PREP_CMD: command 0x00a3 failed: 2
libertas: eth0: Marvell WLAN 802.11 adap
<snip>
[EMAIL PROTECTED]:~# iwconfig eth0 essid any
[EMAIL PROTECTED]:~# ifconfig eth0 up
[EMAIL PROTECTED]:~# iwlist eth0 scan
eth0 Scan completed :
Cell 01 - Address: 00:19:5B:48:16:C3
ESSID:"dlink"
Mode:Managed
Frequency:2.437 GHz (Channel 6)
Quality=85/100 Signal level=-65 dBm Noise level=-88 dBm
Encryption key:off
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
12 Mb/s; 24 Mb/s; 36 Mb/s; 9 Mb/s; 18 Mb/s
48 Mb/s; 54 Mb/s
Cell 02 - Address: 00:03:93:EA:69:AD
ESSID:"Millville"
Mode:Managed
Frequency:2.457 GHz (Channel 10)
Quality=98/100 Signal level=-30 dBm Noise level=-88 dBm
Encryption key:off
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
[EMAIL PROTECTED]:~# udhcpc eth0
udhcpc (v1.11.3) started
run-parts: /etc/udhcpc.d/00avahi-autoipd exited with code 1
Sending discover...
Sending select for 192.168.0.22...
Lease of 192.168.0.22 obtained, lease time 86400
run-parts: /etc/udhcpc.d/00avahi-autoipd exited with code 1
adding dns 66.133.189.215
adding dns 216.67.192.3
[EMAIL PROTECTED]:~# ping gumstix.com
PING gumstix.com (216.139.227.50): 56 data bytes
64 bytes from 216.139.227.50: seq=0 ttl=50 time=132.721 ms
64 bytes from 216.139.227.50: seq=1 ttl=50 time=132.233 ms
64 bytes from 216.139.227.50: seq=2 ttl=50 time=147.369 ms
--- gumstix.com ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 132.233/137.441/147.369 ms
[EMAIL PROTECTED]:~#
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
