From: Felipe Balbi <[EMAIL PROTECTED]>
Signed-off-by: Felipe Balbi <[EMAIL PROTECTED]>
---
arch/arm/mach-omap1/board-fsample.c | 12 ++++++------
1 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-omap1/board-fsample.c
b/arch/arm/mach-omap1/board-fsample.c
index db78946..d758ff1 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -281,7 +281,7 @@ static void __init omap_fsample_map_io(void)
/*
* Hold GSM Reset until needed
*/
- omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
+ __raw_writew(__raw_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
/*
* UARTs -> done automagically by 8250 driver
@@ -292,21 +292,21 @@ static void __init omap_fsample_map_io(void)
*/
/* Flash: CS0 timings setup */
- omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
- omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
+ __raw_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
+ __raw_writel(0x00000088, OMAP730_FLASH_ACFG_0);
/*
* Ethernet support through the debug board
* CS1 timings setup
*/
- omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
- omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
+ __raw_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
+ __raw_writel(0x00000000, OMAP730_FLASH_ACFG_1);
/*
* Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
* It is used as the Ethernet controller interrupt
*/
- omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF,
OMAP730_IO_CONF_9);
+ __raw_writel(__raw_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF,
OMAP730_IO_CONF_9);
}
MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
--
1.6.0.2.307.gc427
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
