From: Felipe Balbi <[EMAIL PROTECTED]>
Signed-off-by: Felipe Balbi <[EMAIL PROTECTED]>
---
arch/arm/mach-omap1/board-osk.c | 12 ++++++------
1 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index e506aef..7d8d18a 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -277,9 +277,9 @@ static void __init osk_init_smc91x(void)
}
/* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */
- l = omap_readl(EMIFS_CCS(1));
+ l = __raw_readl(EMIFS_CCS(1));
l |= 0x3;
- omap_writel(l, EMIFS_CCS(1));
+ __raw_writel(l, EMIFS_CCS(1));
}
static void __init osk_init_cf(void)
@@ -539,9 +539,9 @@ static void __init osk_init(void)
* wrong CS3 memory timings. This mainly leads to CRC
* or similar errors if you use NOR flash (e.g. with JFFS2)
*/
- l = omap_readl(EMIFS_CCS(3));
+ l = __raw_readl(EMIFS_CCS(3));
if (l != EMIFS_CS3_VAL)
- omap_writel(EMIFS_CS3_VAL, EMIFS_CCS(3));
+ __raw_writel(EMIFS_CS3_VAL, EMIFS_CCS(3));
osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
osk_flash_resource.end += SZ_32M - 1;
@@ -549,9 +549,9 @@ static void __init osk_init(void)
omap_board_config = osk_config;
omap_board_config_size = ARRAY_SIZE(osk_config);
- l = omap_readl(USB_TRANSCEIVER_CTRL);
+ l = __raw_readl(USB_TRANSCEIVER_CTRL);
l |= (3 << 1);
- omap_writel(l, USB_TRANSCEIVER_CTRL);
+ __raw_writel(l, USB_TRANSCEIVER_CTRL);
/* irq for tps65010 chip */
/* bootloader effectively does: omap_cfg_reg(U19_1610_MPUIO1); */
--
1.6.0.2.307.gc427
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
