"Rajendra Nayak" <[EMAIL PROTECTED]> writes:
> CPUFreq driver for OMAP3
>
> Signed-off-by: Rajendra Nayak <[EMAIL PROTECTED]>
> ---
> arch/arm/mach-omap2/clock34xx.c | 43
> +++++++++++++++++++++++++++++++++++--
> arch/arm/mach-omap2/resource34xx.c | 17 +++++++++++++-
> arch/arm/plat-omap/cpu-omap.c | 27 ++++++++++++++++++++---
> 3 files changed, 81 insertions(+), 6 deletions(-)
>
> Index: linux-omap-2.6/arch/arm/mach-omap2/clock34xx.c
> ===================================================================
> --- linux-omap-2.6.orig/arch/arm/mach-omap2/clock34xx.c 2008-11-10
> 16:45:19.000000000 +0530
> +++ linux-omap-2.6/arch/arm/mach-omap2/clock34xx.c 2008-11-10
> 16:47:15.000000000 +0530
> @@ -31,6 +31,7 @@
> #include <mach/sram.h>
> #include <asm/div64.h>
> #include <asm/bitops.h>
> +#include <linux/cpufreq.h>
>
> #include <mach/sdrc.h>
> #include "clock.h"
> @@ -657,6 +658,36 @@ static void omap3_clkoutx2_recalc(struct
> */
> #if defined(CONFIG_ARCH_OMAP3)
>
> +#ifdef CONFIG_CPU_FREQ
> +static struct cpufreq_frequency_table freq_table[MAX_VDD1_OPP+1];
> +
> +void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
> +{
> + struct omap_opp *prcm;
> + int i = 0;
> +
> + /* Avoid registering the 120% Overdrive with CPUFreq */
> + prcm = mpu_opps + MAX_VDD1_OPP - 1;
> + for (; prcm->rate; prcm--) {
> + freq_table[i].index = i;
> + freq_table[i].frequency = prcm->rate / 1000;
> + i++;
> + }
> +
> + if (i == 0) {
> + printk(KERN_WARNING "%s: failed to initialize frequency \
> + table\n",
> + __func__);
> + return;
> + }
> +
> + freq_table[i].index = i;
> + freq_table[i].frequency = CPUFREQ_TABLE_END;
> +
> + *table = &freq_table[0];
> +}
> +#endif
> +
> static struct clk_functions omap2_clk_functions = {
> .clk_enable = omap2_clk_enable,
> .clk_disable = omap2_clk_disable,
> @@ -664,6 +695,9 @@ static struct clk_functions omap2_clk_fu
> .clk_set_rate = omap2_clk_set_rate,
> .clk_set_parent = omap2_clk_set_parent,
> .clk_disable_unused = omap2_clk_disable_unused,
> +#ifdef CONFIG_CPU_FREQ
> + .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table,
> +#endif
> };
>
> /*
> @@ -815,12 +849,11 @@ unsigned short get_opp(struct omap_opp *
>
> if (prcm_config->rate <= freq)
> return prcm_config->opp_id; /* Return the Highest OPP */
> - for (; prcm_config->rate; prcm_config--) {
> + for (; prcm_config->rate; prcm_config--)
> if (prcm_config->rate < freq)
> return (prcm_config+1)->opp_id;
> else if (prcm_config->rate == freq)
> return prcm_config->opp_id;
> - }
> /* Return the least OPP */
> return (prcm_config+1)->opp_id;
> }
> @@ -899,6 +932,10 @@ static int omap3_select_table_rate(struc
> clk_set_rate(dpll1_clk, prcm_vdd->rate);
> clk_set_rate(dpll2_clk, dsp_opps[index].rate);
> curr_vdd1_prcm_set = prcm_vdd;
> + omap2_clksel_recalc(&mpu_ck);
> + propagate_rate(&mpu_ck);
> + omap2_clksel_recalc(&iva2_ck);
> + propagate_rate(&iva2_ck);
> #ifndef CONFIG_CPU_FREQ
> /*Update loops_per_jiffy if processor speed is being changed*/
> loops_per_jiffy = compute_lpj(loops_per_jiffy,
> @@ -907,6 +944,8 @@ static int omap3_select_table_rate(struc
> } else {
> clk_set_rate(dpll3_clk, prcm_vdd->rate);
> curr_vdd2_prcm_set = prcm_vdd;
> + omap2_clksel_recalc(&core_ck);
> + propagate_rate(&core_ck);
> }
> return 0;
> }
> Index: linux-omap-2.6/arch/arm/plat-omap/cpu-omap.c
> ===================================================================
> --- linux-omap-2.6.orig/arch/arm/plat-omap/cpu-omap.c 2008-11-10
> 16:45:19.000000000 +0530
> +++ linux-omap-2.6/arch/arm/plat-omap/cpu-omap.c 2008-11-10
> 16:47:15.000000000 +0530
> @@ -8,6 +8,10 @@
> *
> * Based on cpu-sa1110.c, Copyright (C) 2001 Russell King
> *
> + * Copyright (C) 2007-2008 Texas Instruments, Inc.
> + * Updated to support OMAP3
> + * Rajendra Nayak <[EMAIL PROTECTED]>
> + *
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License version 2 as
> * published by the Free Software Foundation.
> @@ -25,6 +29,10 @@
> #include <asm/io.h>
> #include <asm/system.h>
> #include <mach/clock.h>
> +#if defined(CONFIG_ARCH_OMAP3) && !defined(CONFIG_OMAP_PM_NONE)
> +#include <mach/omap-pm.h>
> +#include "../mach-omap2/pm.h"
> +#endif
>
> #define VERY_HI_RATE 900000000
>
> @@ -32,6 +40,8 @@ static struct cpufreq_frequency_table *f
>
> #ifdef CONFIG_ARCH_OMAP1
> #define MPU_CLK "mpu"
> +#elif CONFIG_ARCH_OMAP3
> +#define MPU_CLK "virt_vdd1_prcm_set"
> #else
> #define MPU_CLK "virt_prcm_set"
> #endif
> @@ -89,7 +99,7 @@ static int omap_target(struct cpufreq_po
>
> if (freqs.old == freqs.new)
> return ret;
> -
> +#ifdef CONFIG_ARCH_OMAP1
> cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
> #ifdef CONFIG_CPU_FREQ_DEBUG
> printk(KERN_DEBUG "cpufreq-omap: transition: %u --> %u\n",
> @@ -97,7 +107,19 @@ static int omap_target(struct cpufreq_po
> #endif
> ret = clk_set_rate(mpu_clk, freqs.new * 1000);
> cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
> -
> +#elif defined(CONFIG_ARCH_OMAP3) && !defined(CONFIG_OMAP_PM_NONE)\
> + && defined(CONFIG_MACH_OMAP_3430SDP)
> + {
> + int ind;
> + for (ind = 1; ind <= MAX_VDD1_OPP; ind++) {
> + if (mpu_opps[ind].rate/1000 >= freqs.new) {
> + omap_pm_cpu_set_freq
> + (mpu_opps[ind].rate);
> + break;
> + }
> + }
> + }
> +#endif
Please drop the #ifdef on the 3430SDP. This code need not be board
specific.
I think you could simply check for a non-NULL mpu_opps.
Kevin
> return ret;
> }
>
> @@ -128,7 +150,6 @@ static int __init omap_cpu_init(struct c
>
> /* FIXME: what's the actual transition time? */
> policy->cpuinfo.transition_latency = 10 * 1000 * 1000;
> -
> return 0;
> }
>
> Index: linux-omap-2.6/arch/arm/mach-omap2/resource34xx.c
> ===================================================================
> --- linux-omap-2.6.orig/arch/arm/mach-omap2/resource34xx.c 2008-11-10
> 16:45:19.000000000 +0530
> +++ linux-omap-2.6/arch/arm/mach-omap2/resource34xx.c 2008-11-10
> 16:47:15.000000000 +0530
> @@ -17,6 +17,7 @@
> */
>
> #include <linux/pm_qos_params.h>
> +#include <linux/cpufreq.h>
> #include <mach/powerdomain.h>
> #include <mach/clockdomain.h>
> #include "smartreflex.h"
> @@ -158,16 +159,26 @@ void init_opp(struct shared_resource *re
>
> int set_opp(struct shared_resource *resp, u32 target_level)
> {
> - unsigned long mpu_freq, l3_freq, tput, t_opp;;
> + unsigned long mpu_freq, mpu_old_freq, l3_freq, tput, t_opp;
> int ind;
> struct bus_throughput_db *tput_db;
> + struct cpufreq_freqs freqs_notify;
>
> if (resp->curr_level == target_level)
> return 0;
>
> if (strcmp(resp->name, "vdd1_opp") == 0) {
> + mpu_old_freq = get_freq(mpu_opps + MAX_VDD1_OPP,
> + curr_vdd1_prcm_set->opp_id);
> mpu_freq = get_freq(mpu_opps + MAX_VDD1_OPP,
> target_level);
> +#ifdef CONFIG_CPU_FREQ
> + freqs_notify.old = mpu_old_freq/1000;
> + freqs_notify.new = mpu_freq/1000;
> + freqs_notify.cpu = 0;
> + /* Send pre notification to CPUFreq */
> + cpufreq_notify_transition(&freqs_notify, CPUFREQ_PRECHANGE);
> +#endif
> t_opp = ID_VDD(PRCM_VDD1) |
> ID_OPP_NO(mpu_opps[target_level].opp_id);
> if (resp->curr_level > target_level) {
> @@ -182,6 +193,10 @@ int set_opp(struct shared_resource *resp
> clk_set_rate(vdd1_clk, mpu_freq);
> }
> resp->curr_level = curr_vdd1_prcm_set->opp_id;
> +#ifdef CONFIG_CPU_FREQ
> + /* Send a post notification to CPUFreq */
> + cpufreq_notify_transition(&freqs_notify, CPUFREQ_POSTCHANGE);
> +#endif
> } else if (strcmp(resp->name, "vdd2_opp") == 0) {
> tput_db = resp->resource_data;
> tput = target_level;
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [EMAIL PROTECTED]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
