Re: [REVIEW PATCH] Added OMAP3EVM support on Tomis FBDEV/DSS Patches

[Koen Kooi]

Op 14 nov 2008, om 07:32 heeft [EMAIL PROTECTED] het volgende geschreven:

+       if (system_rev > OMAP3430_REV_ES1_0) {
+               twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+                       ENABLE_VPLL2_DEDICATED, TWL4030_VPLL2_DEDICATED);
+               twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+                       ENABLE_VPLL2_DEV_GRP, TWL4030_VPLL2_DEV_GRP);
+       }
+       gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0);
+       lcd_enabled = 1;
+       return 0;
+}
+
+static void panel_disable_lcd(struct omap_display *display)
+{
+       if (system_rev > OMAP3430_REV_ES1_0) {
+               twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0,
+                               TWL4030_VPLL2_DEDICATED);
+               twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0,
+                               TWL4030_VPLL2_DEV_GRP);
+       }
+       omap_set_gpio_dataout(LCD_PANEL_ENABLE_GPIO, 1);
+       lcd_enabled = 0;
+}

diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach- omap2/board-omap3evm.c

I can confirm that the panel-sdp3430 works on the evm.

regards,

Koen

system_rev() is now omap_rev(), you'll get a really green picture without that change :)

PGP.sig
Description: This is a digitally signed message part