> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:linux-omap-
> [EMAIL PROTECTED] On Behalf Of Koen Kooi
> Sent: Friday, November 14, 2008 5:09 PM
> To: Hiremath, Vaibhav
> Cc: [EMAIL PROTECTED]; [email protected]
> Subject: Re: [REVIEW PATCH] Added OMAP3EVM support on Tomis FBDEV/DSS Patches
>
>
> Op 14 nov 2008, om 07:32 heeft [EMAIL PROTECTED] het volgende geschreven:
>
> >
> > diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-
> > omap2/board-omap3evm.c
> >
> > + if (system_rev > OMAP3430_REV_ES1_0) {
> > + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
> > + ENABLE_VPLL2_DEDICATED, TWL4030_VPLL2_DEDICATED);
> > + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
> > + ENABLE_VPLL2_DEV_GRP, TWL4030_VPLL2_DEV_GRP);
> > + }
> > + gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0);
> > + lcd_enabled = 1;
> > + return 0;
> > +}
> > +
> > +static void panel_disable_lcd(struct omap_display *display)
> > +{
> > + if (system_rev > OMAP3430_REV_ES1_0) {
> > + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0,
> > + TWL4030_VPLL2_DEDICATED);
> > + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0,
> > + TWL4030_VPLL2_DEV_GRP);
> > + }
> > + omap_set_gpio_dataout(LCD_PANEL_ENABLE_GPIO, 1);
> > + lcd_enabled = 0;
> > +}
>
> system_rev() is now omap_rev(), you'll get a really green picture
> without that change :)
>
> I can confirm that the panel-sdp3430 works on the evm.
[Shah, Hardik] Hi panel-omap3evm.c is working fine. We tested that. And we
were getting the green picture. Thanks for pointing that out. We will change
this also in our next patch.
>
> regards,
>
> Koen
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
