"Rajendra Nayak" <[EMAIL PROTECTED]> writes:
> The SRF/DVFS + CPUFreq patches had issues booting on
> non-3430SDP platforms as reported by Kevin Hilman.
> This patch puts non-NULL checks in place for mpu_opps/dsp_opps
> /l3_opps before accessing them and fixes the issue.
>
> This fix/patch can be applied on top of
> pm-20081119 branch
> + [PATCH 00/08] OMAP3 SRF: OPP and Frequency resources
> + [PATCH 00/03] OMAP3 PM: CPUFreq driver for OMAP3
Thanks, I'll pull this fix along with the above two series into
the next PM branch (which should be out later today.)
Kevin
> Signed-off-by: Rajendra Nayak <[EMAIL PROTECTED]>
> ---
> arch/arm/mach-omap2/clock34xx.c | 33
> ++++++++++++++++++++---------
> arch/arm/mach-omap2/pm.h | 18 ---------------
> arch/arm/mach-omap2/resource34xx.c | 21 ++++++++++++++++++
> arch/arm/plat-omap/cpu-omap.c | 6 +----
> arch/arm/plat-omap/include/mach/omap34xx.h | 18 +++++++++++++++
> 5 files changed, 64 insertions(+), 32 deletions(-)
>
> Index: linux-omap-2.6/arch/arm/mach-omap2/clock34xx.c
> ===================================================================
> --- linux-omap-2.6.orig/arch/arm/mach-omap2/clock34xx.c 2008-11-26
> 17:43:12.011090533 +0530
> +++ linux-omap-2.6/arch/arm/mach-omap2/clock34xx.c 2008-11-26
> 17:47:40.551795371 +0530
> @@ -666,6 +666,9 @@ void omap2_clk_init_cpufreq_table(struct
> struct omap_opp *prcm;
> int i = 0;
>
> + if (!mpu_opps)
> + return;
> +
> /* Avoid registering the 120% Overdrive with CPUFreq */
> prcm = mpu_opps + MAX_VDD1_OPP - 1;
> for (; prcm->rate; prcm--) {
> @@ -798,20 +801,24 @@ int __init omap2_clk_init(void)
> dpll3_clk = clk_get(NULL, "dpll3_m2_ck");
>
> mpu_speed = dpll1_clk->rate;
> - prcm_vdd = mpu_opps + MAX_VDD1_OPP;
> - for (; prcm_vdd->rate; prcm_vdd--) {
> - if (prcm_vdd->rate <= mpu_speed) {
> - curr_vdd1_prcm_set = prcm_vdd;
> - break;
> + if (mpu_opps) {
> + prcm_vdd = mpu_opps + MAX_VDD1_OPP;
> + for (; prcm_vdd->rate; prcm_vdd--) {
> + if (prcm_vdd->rate <= mpu_speed) {
> + curr_vdd1_prcm_set = prcm_vdd;
> + break;
> + }
> }
> }
>
> core_speed = dpll3_clk->rate;
> - prcm_vdd = l3_opps + MAX_VDD2_OPP;
> - for (; prcm_vdd->rate; prcm_vdd--) {
> - if (prcm_vdd->rate <= core_speed) {
> - curr_vdd2_prcm_set = prcm_vdd;
> - break;
> + if (l3_opps) {
> + prcm_vdd = l3_opps + MAX_VDD2_OPP;
> + for (; prcm_vdd->rate; prcm_vdd--) {
> + if (prcm_vdd->rate <= core_speed) {
> + curr_vdd2_prcm_set = prcm_vdd;
> + break;
> + }
> }
> }
>
> @@ -878,6 +885,9 @@ static long omap3_round_to_table_rate(st
> if ((clk != &virt_vdd1_prcm_set) && (clk != &virt_vdd2_prcm_set))
> return -EINVAL;
>
> + if (!mpu_opps || !dsp_opps || !l3_opps)
> + return -EINVAL;
> +
> highest_rate = -EINVAL;
>
> if (clk == &virt_vdd1_prcm_set)
> @@ -904,6 +914,9 @@ static int omap3_select_table_rate(struc
> if ((clk != &virt_vdd1_prcm_set) && (clk != &virt_vdd2_prcm_set))
> return -EINVAL;
>
> + if (!mpu_opps || !dsp_opps || !l3_opps)
> + return -EINVAL;
> +
> if (clk == &virt_vdd1_prcm_set) {
> prcm_vdd = mpu_opps + MAX_VDD1_OPP;
> index = MAX_VDD1_OPP;
> Index: linux-omap-2.6/arch/arm/mach-omap2/pm.h
> ===================================================================
> --- linux-omap-2.6.orig/arch/arm/mach-omap2/pm.h 2008-11-26
> 17:43:12.011090533 +0530
> +++ linux-omap-2.6/arch/arm/mach-omap2/pm.h 2008-11-26 17:47:40.552795340
> +0530
> @@ -39,24 +39,6 @@ extern void omap3_pm_off_mode_enable(int
> #endif
> extern int set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
>
> -
> -/* VDD1 OPPS */
> -#define VDD1_OPP1 0x1
> -#define VDD1_OPP2 0x2
> -#define VDD1_OPP3 0x3
> -#define VDD1_OPP4 0x4
> -#define VDD1_OPP5 0x5
> -
> -/* VDD2 OPPS */
> -#define VDD2_OPP1 0x1
> -#define VDD2_OPP2 0x2
> -#define VDD2_OPP3 0x3
> -
> -#define MIN_VDD1_OPP VDD1_OPP1
> -#define MAX_VDD1_OPP VDD1_OPP5
> -#define MIN_VDD2_OPP VDD2_OPP1
> -#define MAX_VDD2_OPP VDD2_OPP3
> -
> #ifdef CONFIG_PM_DEBUG
> extern u32 omap2_read_32k_sync_counter(void);
> extern void omap2_pm_dump(int mode, int resume, unsigned int us);
> Index: linux-omap-2.6/arch/arm/mach-omap2/resource34xx.c
> ===================================================================
> --- linux-omap-2.6.orig/arch/arm/mach-omap2/resource34xx.c 2008-11-26
> 17:43:12.011090533 +0530
> +++ linux-omap-2.6/arch/arm/mach-omap2/resource34xx.c 2008-11-26
> 18:16:28.376582736 +0530
> @@ -144,6 +144,10 @@ static struct device dummy_dsp_dev;
> void init_opp(struct shared_resource *resp)
> {
> resp->no_of_users = 0;
> +
> + if (!mpu_opps || !dsp_opps || !l3_opps)
> + return 0;
> +
> /* Initialize the current level of the OPP resource
> * to the opp set by u-boot.
> */
> @@ -167,6 +171,9 @@ int set_opp(struct shared_resource *resp
> if (resp->curr_level == target_level)
> return 0;
>
> + if (!mpu_opps || !dsp_opps || !l3_opps)
> + return 0;
> +
> if (strcmp(resp->name, "vdd1_opp") == 0) {
> mpu_old_freq = get_freq(mpu_opps + MAX_VDD1_OPP,
> curr_vdd1_prcm_set->opp_id);
> @@ -184,12 +191,16 @@ int set_opp(struct shared_resource *resp
> if (resp->curr_level > target_level) {
> /* Scale Frequency and then voltage */
> clk_set_rate(vdd1_clk, mpu_freq);
> +#ifdef CONFIG_OMAP_SMARTREFLEX
> sr_voltagescale_vcbypass(t_opp,
> mpu_opps[target_level].vsel);
> +#endif
> } else {
> +#ifdef CONFIG_OMAP_SMARTREFLEX
> /* Scale Voltage and then frequency */
> sr_voltagescale_vcbypass(t_opp,
> mpu_opps[target_level].vsel);
> +#endif
> clk_set_rate(vdd1_clk, mpu_freq);
> }
> resp->curr_level = curr_vdd1_prcm_set->opp_id;
> @@ -221,12 +232,16 @@ int set_opp(struct shared_resource *resp
> if (resp->curr_level > target_level) {
> /* Scale Frequency and then voltage */
> clk_set_rate(vdd2_clk, l3_freq);
> +#ifdef CONFIG_OMAP_SMARTREFLEX
> sr_voltagescale_vcbypass(t_opp,
> l3_opps[target_level].vsel);
> +#endif
> } else {
> +#ifdef CONFIG_OMAP_SMARTREFLEX
> /* Scale Voltage and then frequency */
> sr_voltagescale_vcbypass(t_opp,
> l3_opps[target_level].vsel);
> +#endif
> clk_set_rate(vdd2_clk, l3_freq);
> }
> resp->curr_level = curr_vdd2_prcm_set->opp_id;
> @@ -253,6 +268,9 @@ void init_freq(struct shared_resource *r
> char *linked_res_name;
> resp->no_of_users = 0;
>
> + if (!mpu_opps || !dsp_opps)
> + return;
> +
> linked_res_name = (char *)resp->resource_data;
> /* Initialize the current level of the Freq resource
> * to the frequency set by u-boot.
> @@ -271,6 +289,9 @@ int set_freq(struct shared_resource *res
> {
> unsigned int vdd1_opp;
>
> + if (!mpu_opps || !dsp_opps)
> + return 0;
> +
> if (strcmp(resp->name, "mpu_freq") == 0) {
> vdd1_opp = get_opp(mpu_opps + MAX_VDD1_OPP, target_level);
> resource_request("vdd1_opp", &dummy_mpu_dev, vdd1_opp);
> Index: linux-omap-2.6/arch/arm/plat-omap/cpu-omap.c
> ===================================================================
> --- linux-omap-2.6.orig/arch/arm/plat-omap/cpu-omap.c 2008-11-26
> 17:43:12.011090533 +0530
> +++ linux-omap-2.6/arch/arm/plat-omap/cpu-omap.c 2008-11-26
> 17:47:40.552795340 +0530
> @@ -31,7 +31,6 @@
> #include <mach/clock.h>
> #if defined(CONFIG_ARCH_OMAP3) && !defined(CONFIG_OMAP_PM_NONE)
> #include <mach/omap-pm.h>
> -#include "../mach-omap2/pm.h"
> #endif
>
> #define VERY_HI_RATE 900000000
> @@ -107,9 +106,8 @@ static int omap_target(struct cpufreq_po
> #endif
> ret = clk_set_rate(mpu_clk, freqs.new * 1000);
> cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
> -#elif defined(CONFIG_ARCH_OMAP3) && !defined(CONFIG_OMAP_PM_NONE)\
> - && defined(CONFIG_MACH_OMAP_3430SDP)
> - {
> +#elif defined(CONFIG_ARCH_OMAP3) && !defined(CONFIG_OMAP_PM_NONE)
> + if (mpu_opps) {
> int ind;
> for (ind = 1; ind <= MAX_VDD1_OPP; ind++) {
> if (mpu_opps[ind].rate/1000 >= freqs.new) {
> Index: linux-omap-2.6/arch/arm/plat-omap/include/mach/omap34xx.h
> ===================================================================
> --- linux-omap-2.6.orig/arch/arm/plat-omap/include/mach/omap34xx.h
> 2008-11-26 17:43:12.011090533 +0530
> +++ linux-omap-2.6/arch/arm/plat-omap/include/mach/omap34xx.h 2008-11-26
> 17:47:40.553795309 +0530
> @@ -71,5 +71,23 @@
> #define OMAP34XX_DSP_MEM_BASE (OMAP34XX_DSP_BASE + 0x0)
> #define OMAP34XX_DSP_IPI_BASE (OMAP34XX_DSP_BASE + 0x1000000)
> #define OMAP34XX_DSP_MMU_BASE (OMAP34XX_DSP_BASE + 0x2000000)
> +
> +/* VDD1 OPPS */
> +#define VDD1_OPP1 0x1
> +#define VDD1_OPP2 0x2
> +#define VDD1_OPP3 0x3
> +#define VDD1_OPP4 0x4
> +#define VDD1_OPP5 0x5
> +
> +/* VDD2 OPPS */
> +#define VDD2_OPP1 0x1
> +#define VDD2_OPP2 0x2
> +#define VDD2_OPP3 0x3
> +
> +#define MIN_VDD1_OPP VDD1_OPP1
> +#define MAX_VDD1_OPP VDD1_OPP5
> +#define MIN_VDD2_OPP VDD2_OPP1
> +#define MAX_VDD2_OPP VDD2_OPP3
> +
> #endif /* __ASM_ARCH_OMAP34XX_H */
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
