From: Paul Walmsley <[EMAIL PROTECTED]>
On the OMAP3, initialize SDRC timings when the kernel boots. This ensures
that the kernel is running with known, optimized SDRC timings, rather than
whatever was configured by the bootloader.
Signed-off-by: Paul Walmsley <[EMAIL PROTECTED]>
---
arch/arm/mach-omap2/clock34xx.c | 3 ---
arch/arm/mach-omap2/io.c | 36 ++++++++++++++++++++++++++++++++++++
2 files changed, 36 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index adf0be3..cea3840 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -495,9 +495,6 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk,
unsigned long rate)
if (clk != &dpll3_m2_ck)
return -EINVAL;
- if (rate == clk->rate)
- return 0;
-
validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
if (validrate != rate)
return -EINVAL;
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 5b529ae..6fb6c29 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -19,6 +19,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/clk.h>
#include <asm/tlb.h>
@@ -198,6 +199,38 @@ void __init omap2_map_common_io(void)
omapfb_reserve_sdram();
}
+/*
+ * omap2_init_reprogram_sdrc - reprogram SDRC timing parameters
+ *
+ * Sets the CORE DPLL3 M2 divider to the same value that it's at
+ * currently. This has the effect of setting the SDRC SDRAM AC timing
+ * registers to the values currently defined by the kernel. Currently
+ * only defined for OMAP3; will return 0 if called on OMAP2. Returns
+ * -EINVAL if the dpll3_m2_ck cannot be found, 0 if called on OMAP2,
+ * or passes along the return value of clk_set_rate().
+ */
+static int __init _omap2_init_reprogram_sdrc(void)
+{
+ struct clk *dpll3_m2_ck;
+ int v = -EINVAL;
+
+ if (!cpu_is_omap34xx())
+ return 0;
+
+ dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck");
+ if (!dpll3_m2_ck)
+ return -EINVAL;
+
+ pr_info("Reprogramming SDRC\n");
+ v = clk_set_rate(dpll3_m2_ck, clk_get_rate(dpll3_m2_ck));
+ if (v)
+ pr_err("dpll3_m2_clk rate change failed: %d\n", v);
+
+ clk_put(dpll3_m2_ck);
+
+ return v;
+}
+
void __init omap2_init_common_hw(struct omap_sdrc_params *sp,
struct omap_opp *mpu_opps,
struct omap_opp *dsp_opps,
@@ -212,5 +245,8 @@ void __init omap2_init_common_hw(struct omap_sdrc_params
*sp,
omap2_clk_init();
omap_pm_if_init();
omap2_sdrc_init(sp);
+
+ _omap2_init_reprogram_sdrc();
+
gpmc_init();
}
--
1.5.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
