Previously only 1 and 2 was supported. This is needed for DVFS VDD2 control.
Signed-off-by: Tero Kristo <[EMAIL PROTECTED]>
---
arch/arm/mach-omap2/clock34xx.c | 9 +++------
arch/arm/mach-omap2/sram34xx.S | 7 ++++---
arch/arm/plat-omap/include/mach/sram.h | 7 +++++--
arch/arm/plat-omap/sram.c | 6 +++---
4 files changed, 15 insertions(+), 14 deletions(-)
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index cfd7f0f..55b1425 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -516,9 +516,9 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk,
unsigned long rate)
sdrcrate = sdrc_ick.rate;
if (rate > clk->rate)
- sdrcrate <<= ((rate / clk->rate) - 1);
+ sdrcrate <<= ((rate / clk->rate) >> 1);
else
- sdrcrate >>= ((clk->rate / rate) - 1);
+ sdrcrate >>= ((clk->rate / rate) >> 1);
sp = omap2_sdrc_get_params(sdrcrate);
if (!sp)
@@ -545,13 +545,10 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk,
unsigned long rate)
pr_debug("clock: SDRC timing params used: %08x %08x %08x\n",
sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
- /* REVISIT: SRAM code doesn't support other M2 divisors yet */
- WARN_ON(new_div != 1 && new_div != 2);
-
local_irq_disable();
omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
sp->actim_ctrlb, new_div, unlock_dll, c,
- sp->mr);
+ sp->mr, rate > clk->rate);
local_irq_enable();
omap2_clksel_recalc(clk);
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index 16eb4ef..832cd76 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -70,6 +70,7 @@
* r5 = number of MPU cycles to wait for SDRC to stabilize after
* reprogramming the SDRC when switching to a slower MPU speed
* r6 = new SDRC_MR_0 register value
+ * r7 = increasing SDRC rate? (1 = yes, 0 = no)
*
*/
ENTRY(omap3_sram_configure_core_dpll)
@@ -78,8 +79,8 @@ ENTRY(omap3_sram_configure_core_dpll)
ldr r5, [sp, #56] @ load extra args from the stack
ldr r6, [sp, #60] @ load extra args from the stack
dsb @ flush buffered writes to interconnect
- cmp r3, #0x2 @ if increasing SDRC clk rate,
- blne configure_sdrc @ program the SDRC regs early (for RFR)
+ cmp r7, #1 @ if increasing SDRC clk rate,
+ bleq configure_sdrc @ program the SDRC regs early (for RFR)
cmp r4, #SDRC_UNLOCK_DLL @ set the intended DLL state
bleq unlock_dll
blne lock_dll
@@ -89,7 +90,7 @@ ENTRY(omap3_sram_configure_core_dpll)
cmp r4, #SDRC_UNLOCK_DLL @ wait for DLL status to change
bleq wait_dll_unlock
blne wait_dll_lock
- cmp r3, #0x1 @ if increasing SDRC clk rate,
+ cmp r7, #1 @ if increasing SDRC clk rate,
beq return_to_sdram @ return to SDRAM code, otherwise,
bl configure_sdrc @ reprogram SDRC regs now
mov r12, r5
diff --git a/arch/arm/plat-omap/include/mach/sram.h
b/arch/arm/plat-omap/include/mach/sram.h
index d07da3b..ad0a600 100644
--- a/arch/arm/plat-omap/include/mach/sram.h
+++ b/arch/arm/plat-omap/include/mach/sram.h
@@ -24,7 +24,8 @@ extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32
sdrc_rfr_val, int bypass);
extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
u32 sdrc_actim_ctrla,
u32 sdrc_actim_ctrlb, u32 m2,
- u32 unlock_dll, u32 f, u32 sdrc_mr);
+ u32 unlock_dll, u32 f, u32 sdrc_mr,
+ u32 inc);
extern void omap3_sram_restore_context(void);
/* Do not use these */
@@ -62,7 +63,9 @@ extern unsigned long omap243x_sram_reprogram_sdrc_sz;
extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
u32 sdrc_actim_ctrla,
- u32 sdrc_actim_ctrlb, u32 m2);
+ u32 sdrc_actim_ctrlb, u32 m2,
+ u32 unlock_dll, u32 f, u32 sdrc_mr,
+ u32 inc);
extern unsigned long omap3_sram_configure_core_dpll_sz;
#ifdef CONFIG_PM
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 68a1f69..9f6232f 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -372,10 +372,10 @@ static u32 (*_omap3_sram_configure_core_dpll)(u32
sdrc_rfr_ctrl,
u32 sdrc_actim_ctrla,
u32 sdrc_actim_ctrlb,
u32 m2, u32 unlock_dll,
- u32 f, u32 sdrc_mr);
+ u32 f, u32 sdrc_mr, u32 inc);
u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla,
u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll,
- u32 f, u32 sdrc_mr)
+ u32 f, u32 sdrc_mr, u32 inc)
{
if (!_omap3_sram_configure_core_dpll)
omap_sram_error();
@@ -383,7 +383,7 @@ u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32
sdrc_actim_ctrla,
return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl,
sdrc_actim_ctrla,
sdrc_actim_ctrlb, m2,
- unlock_dll, f, sdrc_mr);
+ unlock_dll, f, sdrc_mr, inc);
}
#ifdef CONFIG_PM
--
1.5.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
