Hi,

Yesterday's "Merge branch 'musb'" broke the USB slightly on our board. I
use NFS root via USB gadget ethernet and if I have the usb cable
connected when the device boots up, the network does not go up
correctly. If I disconnect and connect the cable the USB starts working.

I can't currently test this on other boards, but I will test it on
beagle later. 

g_ether gadget: high speed config #1: CDC Ethernet (ECM)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
     device=usb0, addr=192.168.2.15, mask=255.255.255.0, gw=255.255.255.255,
     host=192.168.2.15, domain=, nis-domain=(none),
     bootserver=255.255.255.255, rootserver=192.168.2.14, rootpath=
Looking up port of RPC 100003/2 on 192.168.2.14

(at this point the interface is up on PC side, but pings don't go through)

 Tomi


--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to