Hello,
The latest PM branch is now available[1].
I've done basic testing of retention and off-mode (suspend and dynamic
idle) on Beagle and custom HW. My SDP has something still keeping
CORE active that others have not seen, but I have yet to debug. Any
other reports from SDP testing would be appreciated.
Notable changes/updates
- rebased on latest clock updates and fixes from Paul
- clockfw pre- and post- notifiers
- DVFS for VDD2
Full git shortlog below[2]
Enjoy,
Kevin
[1] See branch 'pm' in my git repo:
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm.git
which is also mirrored as the branch 'pm' of the normal linux-omap
repo (but will not sync until 03:30 GMT)
[2] git shortlog:
Carlos Chinea (1):
OMAP3:PM: Update SSI omapdev record
Jouni Hogander (5):
OMAP3: PM: Use pwrdm_set_next_pwrst instead of set_pwrdm_state in idle
loop
OMAP3: PM: Fix wrong sequence in suspend.
OMAP3: PM: Do not build suspend code if SUSPEND is not enabled
OMAP: PM: Build fails if PM is not enabled
OMAP2: PM: Fix omap2 build
Kalle Jokiniemi (3):
OMAP: PM: sysfs interface for enabling voltage off in idle
OMAP3: PM: Fix cpu idle init sequencing
OMAP: SRF: Fixes to shared resource framework (Ver.3)
Kevin Hilman (4):
OMAP3: PM: CPUidle: obey enable_off_mode flag
OMAP3: PM: CPUidle: restrict C-states on UART activity
OMAP3: PM: decouple PER and CORE context save and restore
OMAP2/3: PM: system_rev -> omap_rev()
Paul Walmsley (29):
OMAP2/3 clock: implement clock notifier infrastructure
OMAP clock: add notifier infrastructure
OMAP2/3 clock: store planned clock rates into temporary rate storage
OMAP2/3 clock: add clk post-rate-change notifiers
OMAP2/3 clock: add clock pre-rate-change notification
OMAP2/3 clock: add clock prepare-rate-change notifications
OMAP2/3 clock: add clock abort-rate-change notifications
OMAP2/3 PM: create the OMAP PM interface and add a default OMAP PM no-op
layer.
OMAP2/3 omapdev: add basic omapdev structure
OMAP242x omapdev: add OMAP242x omapdev records
OMAP243x omapdev: add OMAP243x omapdev records
OMAP3xxx omapdev: add OMAP3xxx omapdev records
OMAP2/3 omapdev: add code to walk the omapdev records
ARM: MMU: add a Non-cacheable Normal executable memory type
OMAP3 SRAM: mark OCM RAM as Non-cacheable Normal memory
OMAP3 SRAM: add ARM barriers to omap3_sram_configure_core_dpll
OMAP3 clock: add interconnect barriers to CORE DPLL M2 change
OMAP3 SRAM: clear the SDRC PWRENA bit during SDRC frequency change
OMAP3 SDRC: Add 166MHz, 83MHz SDRC settings for the BeagleBoard
OMAP3 SDRC: initialize SDRC_POWER at boot
OMAP3 SRAM: renumber registers to make space for argument passing
OMAP3 clock: only unlock SDRC DLL if SDRC clk < 83MHz
OMAP3 clock: use pr_debug() rather than pr_info() in some clock change
code
OMAP3 clock: remove wait for DPLL3 M2 clock to stabilize
OMAP3 clock: initialize SDRC timings at kernel start
OMAP3 clock: add a short delay when lowering CORE clk rate
OMAP3 clock/SDRC: program SDRC_MR register during SDRC clock change
OMAP3 SRAM: add more comments on the SRAM code
OMAP3 SRAM: convert SRAM code to use macros rather than magic numbers
Peter 'p2' De Schrijver (12):
OMAP: PM counter infrastructure.
OMAP: PM: Hook into PM counters
OMAP: PM: Add closures to clkdm_for_each and pwrdm_for_each.
OMAP: PM: Add pm-debug counters
OMAP: PM debug: make powerdomains use PM-debug counters
OMAP: PM: Add definitions for ETK pads and observability registers
OMAP: Debug observability and ETK padconf implementation
OMAP: Add debug observablity (debobs) Kconfig item
OMAP: PM: Implement get_last_off_on_transaction_id()
Save sram context after changing MPU, DSP or core clocks
Fix omap_getspeed.
Make sure omap cpufreq driver initializes after cpufreq framework and
governors
Rajendra Nayak (35):
OMAP3: PM: GPMC context save/restore
OMAP3: PM: GPIO context save/restore
OMAP3: PM: I2C context save/restore
OMAP3: PM: INTC context save/restore
OMAP3: PM: PRCM context save/restore
OMAP3: PM: Populate scratchpad contents
OMAP3: PM: SCM context save/restore
OMAP3: PM: SRAM restore function
OMAP3: PM: handle PER/NEON/CORE in idle
OMAP3: PM: Restore MMU table entry
OMAP3: PM: MPU off-mode support
OMAP3: PM: CORE domain off-mode support
OMAP3: PM: allow runtime enable/disable of OFF mode
OMAP3: 3430SDP minimal kernel defconfig
OMAP3: PM: CPUidle: Basic support for C1-C2
OMAP3: PM: CPUidle: Enables state C4
OMAP3: PM: CPUidle: Enables C3 and C5
OMAP3: PM: CPUidle: Safe-state on bm-activity
OMAP3 SRF: Generic shared resource f/w
OMAP3 SRF: MPU/CORE/PD latency modeling
OMAP3 SRF: omap3 srf driver
OMAP3 SRF: OMAP PM srf implementation
OMAP3 SRF: Add CORE rate table param in OMAP-PM
OMAP3 SRF: Add VDD1/VDD2 rate tables for 3430SDP
OMAP3 SRF: Add virt clk nodes for VDD1/VDD2
OMAP3 SRF: Adds OPP/Freq res's in SRF
OMAP3 SRF: Update OMAP-PM layer
OMAP3 SRF: Voltage scaling support
OMAP3 SRF: VDD2 scaling support
OMAP3 SRF: Adds sysfs control for VDD1/VDD2 OPP's
OMAP3 PM: Replace spinlocks with mutex in SRF
OMAP3 PM: CPUFreq driver for OMAP3
OMAP3 PM: Update the min defconfig for 3430sdp
OMAP3 SRF: Fix crash on non-3430SDP platforms with DVFS/CPUFreq
OMAP3: PM: Scale VDD2 OPP for VDD1 OPP3 and higher
Tero Kristo (26):
OMAP: PM debug: do not print out status for meta powerdomains (dpll*)
OMAP: PM debug: Add PRCM register dump support
OMAP: PM: DMA context save / restore
OMAP: PM: off-mode support for DMA on EMU/HS devices
OMAP3: SRAM size fix for HS/EMU devices
OMAP3 PM: off-mode support for HS/EMU devices
OMAP3: PM: Enable SDRAM auto-refresh during sleep
OMAP: SDRC: Add new register definitions for SDRAM controller
OMAP3: PM: SDRC auto-refresh workaround for off-mode
PM: Added three PLL registers to the PRCM context save
PM: Changed secure RAM storage size from 0x8000 to 0x803F
PM: Added suspend target state control to debugfs for OMAP3
OMAP3: PM: Prevent PER from going OFF when CORE is going INA
PM OMAP3: Change omap3_save_secure_ram to be called only during init
OMAP3: PM: MPU and CORE should stay awake if there is CAM domain ACTIVE
OMAP3: GPIO fixes for off-mode
PM: OMAP3: Refreshed DVFS VDD1 control against latest clock fw
OMAP3: Add support for DPLL3 divisor values higher than 2
OMAP3: PM: Fixed VDD2 control to work from both sysfs and SRF API
OMAP3: PM: Added DVFS OPP locking interface for VDD1 and VDD2
OMAP3: Fix rate calculation bug in omap3_select_table_rate
OMAP3: PM: Prevented DVFS state switches when enabling off-mode
OMAP3: PM: Enable VDD2 OPP1
OMAP3: PM: Fix linker error without CONFIG_PM option
PM: OMAP3: Removed a couple of unused variables from DVFS code
PM: OMAP3: Added support for possibly failing clk_set_rate to DVFS
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
