On 19.02.2014 15:56, Balaji T K wrote:
Few cleanups to reduce code indent,
Add pbias_regulator support and adapt omap_hsmmc to use pbias regulator
to configure required voltage on mmc1 pad(SD card) i/o rails on OMAP SoCs.
Balaji T K (7):
mmc: omap_hsmmc: use devm_regulator API
mmc: omap_hsmmc: handle vcc and vcc_aux independently
regulator: add pbias regulator support
mmc: omap_hsmmc: adapt hsmmc to use pbias regulator
ARM: dts: add pbias dt node
ARM: OMAP: enable SYSCON and REGULATOR_PBIAS in omap2plus_defconfig
mmc: omap_hsmmc: remove pbias workaround
.../bindings/regulator/pbias-regulator.txt | 27 ++
arch/arm/boot/dts/dra7.dtsi | 17 ++
arch/arm/boot/dts/omap2430.dtsi | 17 ++
arch/arm/boot/dts/omap3.dtsi | 17 ++
arch/arm/boot/dts/omap4.dtsi | 17 ++
arch/arm/boot/dts/omap5.dtsi | 17 ++
arch/arm/configs/omap2plus_defconfig | 2 +
drivers/mmc/host/omap_hsmmc.c | 111 +++++----
drivers/regulator/Kconfig | 9 +
drivers/regulator/Makefile | 1 +
drivers/regulator/pbias-regulator.c | 255 ++++++++++++++++++++
11 files changed, 441 insertions(+), 49 deletions(-)
create mode 100644
Documentation/devicetree/bindings/regulator/pbias-regulator.txt
create mode 100644 drivers/regulator/pbias-regulator.c
This patch series (its v11 even though this mail has the subject v10)
fixes problems I'm experiencing with MMC detection on some OMAP3 based
boards. So:
Tested-by: Stefan Roese <s...@denx.de>
Thanks,
Stefan
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
