On Thu, Mar 13, 2014 at 08:58:29AM +0000, Sathya Prakash M R wrote:
> Add device node for DSS module for AM4372. Both the
> AM437x-Gp evm and Am43x-Epos evm use the same LCD panel.
> The lcd timings are added in respective dts files.
> Adds display pinctrl and enables required gpio.
> Also set the right parent clock to the DSS clock.
>
> Signed-off-by: Sathya Prakash M R <sath...@ti.com>
> ---
> arch/arm/boot/dts/am4372.dtsi | 28 +++++++++++++
> arch/arm/boot/dts/am437x-gp-evm.dts | 77
> ++++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/am43x-epos-evm.dts | 73 ++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/am43xx-clocks.dtsi | 2 +
> 4 files changed, 180 insertions(+)
>
> diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
> index ea55a4e..b72a7df 100644
> --- a/arch/arm/boot/dts/am4372.dtsi
> +++ b/arch/arm/boot/dts/am4372.dtsi
> @@ -684,6 +684,34 @@
> num-cs = <4>;
> status = "disabled";
> };
> +
> + dss: dss@4832A000 {
> + compatible = "ti,omap3-dss", "simple-bus";
This doesn't look right to me. I'm not sure it makes sense for
"simple-bus" to be in the compatible list.
Are the child nodes usable in isolation, or are they dependent on the
"ti,omap3-dss" node? What exactly does the "ti,omap3-dss" node
represent?
Thanks,
Mark.
> + reg = <0x4832A000 0x200>;
> + ti,hwmods = "dss_core";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + dispc@4832A400 {
> + compatible = "ti,omap3-dispc";
> + reg = <0x4832A400 0x400>;
> + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
> + ti,hwmods = "dss_dispc";
> + };
> +
> + dpi: encoder@0 {
> + compatible = "ti,omap3-dpi";
> + };
> +
> + rfbi: rfbi@4832A800 {
> + compatible = "ti,omap3-rfbi";
> + reg = <0x4832A800 0x100>;
> + ti,hwmods = "dss_rfbi";
> + };
> +
> + };
> +
> };
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
