On 17 April 2014 21:22, Tony Lindgren <[email protected]> wrote: > * Joachim Eastwood <[email protected]> [140417 11:05]: >> Hi Tomi, >> >> My VAR-DVK-OM44 (OMAP4460) has both a HDMI and a LCD panel. As HDMI is >> now working (thanks) I also taken a look at panel-dpi. >> >> I found the DT patch for panel-dpi on the mailing list. >> OMAPDSS: panel-dpi: Add DT support: >> http://marc.info/?l=devicetree&m=139030201815380&w=2 >> >> And I got my display working with DT :) >> So you add can my: Tested-by: Joachim Eastwood <[email protected]> >> >> Could you upstream the panel-dpi DT support and the HDMI connector >> gpio hpd patch in 3.16? >> I hope it's easier to upstream the stuff when it gets some users in DT. > > Good to hear. The DPI panel support should use gpio-backlight > driver as discussed in the DPI thread. Did you have to patch > anything for the timings etc?
The only driver patches I use are those two from Tomi mentioned above. (panel-dpi DT support and HDMI connector gpio-hpd) > If you have the board working, care to take a look at making > the gpio-backlight change? I am already using the gpio-backlight driver. You can take a look at the device tree for VAR-DVK-OM44 here: http://slexy.org/raw/s2Pz4BELGe I'll post the patch set on list tomorrow. regards Joachim Eastwood -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
