* Joachim Eastwood <[email protected]> [140417 13:51]: > On 17 April 2014 21:22, Tony Lindgren <[email protected]> wrote: > > * Joachim Eastwood <[email protected]> [140417 11:05]: > >> Hi Tomi, > >> > >> My VAR-DVK-OM44 (OMAP4460) has both a HDMI and a LCD panel. As HDMI is > >> now working (thanks) I also taken a look at panel-dpi. > >> > >> I found the DT patch for panel-dpi on the mailing list. > >> OMAPDSS: panel-dpi: Add DT support: > >> http://marc.info/?l=devicetree&m=139030201815380&w=2 > >> > >> And I got my display working with DT :) > >> So you add can my: Tested-by: Joachim Eastwood <[email protected]> > >> > >> Could you upstream the panel-dpi DT support and the HDMI connector > >> gpio hpd patch in 3.16? > >> I hope it's easier to upstream the stuff when it gets some users in DT. > > > > Good to hear. The DPI panel support should use gpio-backlight > > driver as discussed in the DPI thread. Did you have to patch > > anything for the timings etc? > > The only driver patches I use are those two from Tomi mentioned above. > (panel-dpi DT support and HDMI connector gpio-hpd) > > > If you have the board working, care to take a look at making > > the gpio-backlight change? > > I am already using the gpio-backlight driver.
OK great, so then we can just drop that GPIO backlight handling from the DPI DT patch I presume. > You can take a look at the device tree for VAR-DVK-OM44 here: > http://slexy.org/raw/s2Pz4BELGe > > I'll post the patch set on list tomorrow. Thanks for the link, that pretty much clarifies all the parts I was wondering about. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
