From: NeilBrown <[email protected]> Add comments to state which GPIO is used for some interrupts.
Signed-off-by: NeilBrown <[email protected]> --- arch/arm/boot/dts/omap3-gta04.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 6f5fcbb..b65b5ed 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -229,7 +229,7 @@ compatible = "bosch,bmp085"; reg = <0x77>; interrupt-parent = <&gpio4>; - interrupts = <17 IRQ_TYPE_EDGE_RISING>; + interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */ }; /* accelerometer */ @@ -237,7 +237,7 @@ compatible = "bosch,bma180"; reg = <0x41>; interrupt-parent = <&gpio4>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */ }; /* leds */ @@ -288,7 +288,7 @@ compatible = "ti,tsc2007"; reg = <0x48>; interrupt-parent = <&gpio6>; - interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */ gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; ti,x-plate-ohms = <600>; }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
