Hi Tero,
On 03/20/2015 01:44 PM, Kristo, Tero wrote:
> This patch creates an l4_wkup interconnect for AM33xx, and moves some of
> the generic peripherals under it. System control module nodes are moved
> under this new interconnect also, and the SCM clock layout is changed
> to use the renamed SCM node as the clock provider.
>
> Signed-off-by: Tero Kristo <[email protected]>
> ---
> Documentation/devicetree/bindings/arm/omap/l4.txt | 1 +
> .../devicetree/bindings/arm/omap/prcm.txt | 2 +-
> arch/arm/boot/dts/am33xx-clocks.dtsi | 2 +-
> arch/arm/boot/dts/am33xx.dtsi | 87
> +++++++++++---------
> arch/arm/mach-omap2/control.c | 2 +-
> 5 files changed, 51 insertions(+), 43 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/omap/l4.txt
> b/Documentation/devicetree/bindings/arm/omap/l4.txt
> index 6402022..d333f0a 100644
> --- a/Documentation/devicetree/bindings/arm/omap/l4.txt
> +++ b/Documentation/devicetree/bindings/arm/omap/l4.txt
> @@ -6,6 +6,7 @@ Required properties:
> - compatible : Should be "ti,omap2-l4" for OMAP2 family l4 core bus
> Should be "ti,omap2-l4-wkup" for OMAP2 family l4 wkup bus
> Should be "ti,omap3-l4-core" for OMAP3 family l4 core bus
> + Should be "ti,am3-l4-wkup" for AM33xx family l4 wkup bus
> - ranges : contains the IO map range for the bus
>
> Examples:
> diff --git a/Documentation/devicetree/bindings/arm/omap/prcm.txt
> b/Documentation/devicetree/bindings/arm/omap/prcm.txt
> index ef5a74b..c8e2027 100644
> --- a/Documentation/devicetree/bindings/arm/omap/prcm.txt
> +++ b/Documentation/devicetree/bindings/arm/omap/prcm.txt
> @@ -10,7 +10,7 @@ documentation about the individual clock/clockdomain nodes.
> Required properties:
> - compatible: Must be one of:
> "ti,am3-prcm"
> - "ti,am3-scrm"
> + "ti,am3-scm"
> "ti,am4-prcm"
> "ti,am4-scrm"
> "ti,omap2-prcm"
> diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi
> b/arch/arm/boot/dts/am33xx-clocks.dtsi
> index 712edce..236c78a 100644
> --- a/arch/arm/boot/dts/am33xx-clocks.dtsi
> +++ b/arch/arm/boot/dts/am33xx-clocks.dtsi
> @@ -7,7 +7,7 @@
> * it under the terms of the GNU General Public License version 2 as
> * published by the Free Software Foundation.
> */
> -&scrm_clocks {
> +&scm_clocks {
> sys_clkin_ck: sys_clkin_ck {
> #clock-cells = <0>;
> compatible = "ti,mux-clock";
> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index acd3705..8d26261 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -83,20 +83,6 @@
> };
> };
>
> - am33xx_control_module: control_module@4a002000 {
> - compatible = "syscon";
> - reg = <0x44e10000 0x7fc>;
> - };
> -
> - am33xx_pinmux: pinmux@44e10800 {
> - compatible = "pinctrl-single";
> - reg = <0x44e10800 0x0238>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - pinctrl-single,register-width = <32>;
> - pinctrl-single,function-mask = <0x7f>;
> - };
> -
> /*
> * XXX: Use a flat representation of the AM33XX interconnect.
> * The real AM33XX interconnect network is quite complex. Since
> @@ -111,37 +97,58 @@
> ranges;
> ti,hwmods = "l3_main";
>
> - prcm: prcm@44e00000 {
> - compatible = "ti,am3-prcm";
> - reg = <0x44e00000 0x4000>;
> -
> - prcm_clocks: clocks {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - };
> + l4_wkup: l4_wkup@44c00000 {
> + compatible = "ti,am3-l4-wkup", "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x44c00000 0x280000>;
>
> - prcm_clockdomains: clockdomains {
> - };
> - };
> + prcm: prcm@200000 {
> + compatible = "ti,am3-prcm";
> + reg = <0x200000 0x4000>;
>
> - scrm: scrm@44e10000 {
> - compatible = "ti,am3-scrm";
> - reg = <0x44e10000 0x2000>;
> + prcm_clocks: clocks {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
>
> - scrm_clocks: clocks {
> - #address-cells = <1>;
> - #size-cells = <0>;
> + prcm_clockdomains: clockdomains {
> + };
> };
>
> - scrm_clockdomains: clockdomains {
> + scm: scm@210000 {
> + compatible = "ti,am3-scm", "simple-bus";
> + reg = <0x210000 0x2000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x210000 0x2000>;
> +
> + am33xx_pinmux: pinmux@800 {
> + compatible = "pinctrl-single";
> + reg = <0x800 0x238>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-single,register-width = <32>;
> + pinctrl-single,function-mask = <0x7f>;
> + };
> +
> + scm_conf: scm_conf@0 {
> + compatible = "syscon";
> + reg = <0x0 0x7fc>;
Hmm, you are consolidating the am33xx_control_module and cm nodes, so is
this supposed to be 0x800 or 0x7fc? I would think it should be 0x800.
Also, are we ordering the child nodes of scm by node names or addresses.
I have to add the wkup_m3 node, and prefer ordering by addresses.
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + scm_clocks: clocks {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +
> + scm_clockdomains: clockdomains {
> + };
> };
> };
>
> - cm: syscon@44e10000 {
> - compatible = "ti,am33xx-controlmodule", "syscon";
> - reg = <0x44e10000 0x800>;
> - };
> -
regards
Suman
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
