Let's fix pinmux address of gpio 170 used by tfp410 powerdown-gpio.

According to the OMAP35x Technical Reference Manual
  CONTROL_PADCONF_I2C3_SDA[15:0]  0x480021C4 mode0: i2c3_sda
  CONTROL_PADCONF_I2C3_SDA[31:16] 0x480021C4 mode4: gpio_170
the pinmux address of gpio 170 must be 0x480021C6.

The former wrong address broke i2c3 (used by hdmi ddc), resulting in
kernel message:
  omap_i2c 48060000.i2c: controller timed out

Signed-off-by: Carl Frederik Werner <[email protected]>
---
 arch/arm/boot/dts/omap3-beagle.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap3-beagle.dts 
b/arch/arm/boot/dts/omap3-beagle.dts
index fd792a4..18b178b 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -202,7 +202,7 @@
 
        tfp410_pins: pinmux_tfp410_pins {
                pinctrl-single,pins = <
-                       0x194 (PIN_OUTPUT | MUX_MODE4)  /* hdq_sio.gpio_170 */
+                       0x196 (PIN_OUTPUT | MUX_MODE4)  /* hdq_sio.gpio_170 */
                >;
        };
 
-- 
2.5.1

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to