* Carl Frederik Werner <[email protected]> [150901 18:18]:
> Let's fix pinmux address of gpio 170 used by tfp410 powerdown-gpio.
> 
> According to the OMAP35x Technical Reference Manual
>   CONTROL_PADCONF_I2C3_SDA[15:0]  0x480021C4 mode0: i2c3_sda
>   CONTROL_PADCONF_I2C3_SDA[31:16] 0x480021C4 mode4: gpio_170
> the pinmux address of gpio 170 must be 0x480021C6.
> 
> The former wrong address broke i2c3 (used by hdmi ddc), resulting in
> kernel message:
>   omap_i2c 48060000.i2c: controller timed out
> 
> Signed-off-by: Carl Frederik Werner <[email protected]>

Thanks applying into omap-for-v4.3/fixes with cc stable v3.15+.
Good to see issues like this to get fixed.

Regards,

Tony

> ---
>  arch/arm/boot/dts/omap3-beagle.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/omap3-beagle.dts 
> b/arch/arm/boot/dts/omap3-beagle.dts
> index fd792a4..18b178b 100644
> --- a/arch/arm/boot/dts/omap3-beagle.dts
> +++ b/arch/arm/boot/dts/omap3-beagle.dts
> @@ -202,7 +202,7 @@
>  
>       tfp410_pins: pinmux_tfp410_pins {
>               pinctrl-single,pins = <
> -                     0x194 (PIN_OUTPUT | MUX_MODE4)  /* hdq_sio.gpio_170 */
> +                     0x196 (PIN_OUTPUT | MUX_MODE4)  /* hdq_sio.gpio_170 */
>               >;
>       };
>  
> -- 
> 2.5.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [email protected]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to