One of the CompuLab cm-t43 configurations comes with on-board eMMC as
primary storage, residing on the mmc2 interface. Add it to the device tree.
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
Cc: Tony Lindgren <t...@atomide.com>
Cc: Benoit Cousson <bcous...@baylibre.com>
Cc: Rob Herring <r...@kernel.org>
Cc: Mark Rutland <mark.rutl...@arm.com>
Cc: Pawel Moll <pawel.m...@arm.com>
Cc: Igor Grinberg <grinb...@compulab.co.il>
Cc: Dmitry Lifshitz <lifsh...@compulab.co.il>
Cc: Ian Campbell <ijc+devicet...@hellion.org.uk>
---
Changes in V2:
- Removed unnecessary line break after fixedregulator-v3_3 section.
arch/arm/boot/dts/am437x-cm-t43.dts | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts
b/arch/arm/boot/dts/am437x-cm-t43.dts
index a2893c6..1011acc 100644
--- a/arch/arm/boot/dts/am437x-cm-t43.dts
+++ b/arch/arm/boot/dts/am437x-cm-t43.dts
@@ -26,6 +26,15 @@
linux,default-trigger = "heartbeat";
};
};
+
+ vmmc_3v3: fixedregulator-v3_3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ enable-active-high;
+ };
};
&am43xx_pinmux {
@@ -45,6 +54,21 @@
>;
};
+ emmc_pins: emmc_pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2) /*
gpmc_ad8.mmc1_dat0 */
+ AM4372_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2) /*
gpmc_ad9.mmc1_dat1 */
+ AM4372_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2) /*
gpmc_ad10.mmc1_dat2 */
+ AM4372_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2) /*
gpmc_ad11.mmc1_dat3 */
+ AM4372_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE2) /*
gpmc_ad12.mmc1_dat4 */
+ AM4372_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE2) /*
gpmc_ad13.mmc1_dat5 */
+ AM4372_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE2) /*
gpmc_ad14.mmc1_dat6 */
+ AM4372_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE2) /*
gpmc_ad15.mmc1_dat7 */
+ AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /*
gpmc_csn1.mmc1_clk */
+ AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /*
gpmc_csn2.mmc1_cmd */
+ >;
+ };
+
spi0_pins: pinmux_spi0_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0) /*
spi0_sclk.spi0_sclk */
@@ -271,6 +295,15 @@
status = "okay";
};
+&mmc2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins>;
+ vmmc-supply = <&vmmc_3v3>;
+ bus-width = <8>;
+ ti,non-removable;
+};
+
&spi0 {
status = "okay";
pinctrl-names = "default";
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
