Add HDMI connector node without a valid input endpoint. CompuLab SB-SOM is a carrier board, hence the endpoint should be added in the board DT with a valid HDMI output.
Signed-off-by: Dmitry Lifshitz <[email protected]> Acked-by: Igor Grinberg <[email protected]> --- v2: * No fuctional changes * Reformat subject arch/arm/boot/dts/compulab-sb-som.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/compulab-sb-som.dtsi b/arch/arm/boot/dts/compulab-sb-som.dtsi index 402a143..93d7e23 100644 --- a/arch/arm/boot/dts/compulab-sb-som.dtsi +++ b/arch/arm/boot/dts/compulab-sb-som.dtsi @@ -39,4 +39,11 @@ pixelclk-active = <1>; }; }; + + hdmi_conn: connector@0 { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "a"; + }; }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
