On-board EEPROM chip is used for storing a board production info.

Add carrier board EEPROM support (over I2C5 bus).

Signed-off-by: Dmitry Lifshitz <lifsh...@compulab.co.il>
---

  v2:

   * No fuctional changes
   * Reformat subject

 arch/arm/boot/dts/am57xx-sbc-am57x.dts | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts 
b/arch/arm/boot/dts/am57xx-sbc-am57x.dts
index 17a1972..a3588ba 100644
--- a/arch/arm/boot/dts/am57xx-sbc-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-sbc-am57x.dts
@@ -43,6 +43,13 @@
                        DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) 
/* usb1_drvvbus */
                >;
        };
+
+       i2c5_pins_default: i2c5_pins_default {
+               pinctrl-single,pins = <
+                       DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT| MUX_MODE10)        
/* mcasp1_axr0.i2c5_sda */
+                       DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT| MUX_MODE10)        
/* mcasp1_axr1.i2c5_scl */
+               >;
+       };
 };
 
 &uart3 {
@@ -70,3 +77,16 @@
        pinctrl-names = "default";
        pinctrl-0 = <&usb1_pins>;
 };
+
+&i2c5 {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c5_pins_default>;
+       clock-frequency = <400000>;
+
+       eeprom_base: atmel@50 {
+               compatible = "atmel,24c08";
+               reg = <0x50>;
+               pagesize = <16>;
+       };
+};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to