On Tue, Jan 05, 2016 at 02:49:29PM -0800, Tony Lindgren wrote:
> Commit 63aa945b1013 ("memory: omap-gpmc: Add Kconfig option for debug")
> unified the GPMC debug for the SoCs with GPMC. The commit also left
> out the option for HWMOD_INIT_NO_RESET as we now require proper timings
> for GPMC to be able to remap GPMC devices out of address 0.
> Unfortunately on 900, onenand now only partially works with the device

You may want to change 900 to n900 (maybe even Nokia N900) before
actually committing this.

> tree provided timings. It works enough to get detected but the clock
> rate supported by the onenand chip gets misdetected. This in turn causes
> the GPMC timings to be miscalculated and this leads into file system
> corruption on n900.
> Looks like onenand needs CS_CONFIG1 bit 27 WRITETYPE set for for sync
> write. This is needed also for async timings when we write to onenand
> with omap2_onenand_set_async_mode(). Without sync write bit set, the
> async read for the onenand ONENAND_REG_VERSION_ID will return 0xfff.
> Let's exit with an error if onenand rate is not detected. And let's
> remove the extra call to omap2_onenand_set_async_mode() as we only
> need to do this once at the end of omap2_onenand_setup_async().
> Reported-by: Ivaylo Dimitrov <ivo.g.dimitrov...@gmail.com>
> Signed-off-by: Tony Lindgren <t...@atomide.com>

-- Sebastian

Attachment: signature.asc
Description: PGP signature

Reply via email to