Hi Gary, LDP is a development board, I have to work on LDP panel driver and BSP code to support new DSS2, It is ported on linux-omap tree. I am still working on testing the features. For camera I might move into V4l2, but I cannot confirm this, I am still working on testing the Framebuffer features.
Regards, Subbu ________________________________________ From: Gary Thomas [[email protected]] Sent: Tuesday, June 02, 2009 6:52 AM To: Venkatesh, Subbu Cc: [email protected]; Shah, Hardik; [email protected] Subject: Re: DSS2: How to test TV and LCD output simulatenously Venkatesh, Subbu wrote: > Hi, > I have DSS2 ported on LDP board, I could manage to get output display on TV > and LCD interface individually, also tested some of the features like > Rotation and Mirroring, they worked with out any problem. What does "DSS2 ported on LDP board" mean? What source tree/branch did you use? > Now I am trying to get output both on TV and LCD simultaneously, > > I was not successful with my approach that I tried, like > > 1. Boot the kernel with the default LCD display > 2. Then I enabled ntsc timings for TV, as PAL do not work on it. > #echo ntsc > /sys/devices/platform/omapdss/display1/timings > 3. Enabled TV > # echo 1 > /sys/devices/platform/omapdss/display1/enable > and did the common fb test.... > But it did not seem to work. > Its nice if someone has different working approach or can suggest me where I > am going wrong in the above steps. Is this stuff documented somewhere? Like the difference between DSS1 and DSS2? How the various layers and overlays are supposed to work? What about the camera interface? Thanks -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
