Venkatesh, Subbu wrote: > Hello Gary, > I have already emailed the patch, here is the link.. > http://patchwork.kernel.org/patch/24196/
Thanks, I'll give it a try. > ________________________________________ > From: Gary Thomas [g...@mlbassoc.com] > Sent: Tuesday, June 02, 2009 10:38 AM > To: Venkatesh, Subbu > Cc: linux-omap@vger.kernel.org; Shah, Hardik; tomi.valkei...@nokia.com > Subject: Re: DSS2: How to test TV and LCD output simulatenously > > Venkatesh, Subbu wrote: >> Hi Gary, >> LDP is a development board, I have to work on LDP panel driver and BSP code >> to support new DSS2, It is ported on linux-omap tree. >> I am still working on testing the features. For camera I might move into >> V4l2, but I cannot confirm this, I am still working on testing the >> Framebuffer features. > > How much of this can you share? I'd like to try this on my LDP (Zoom1) > and then get it ported to my own hardware (very similar to Zoom1) > > Thanks > >> ________________________________________ >> From: Gary Thomas [g...@mlbassoc.com] >> Sent: Tuesday, June 02, 2009 6:52 AM >> To: Venkatesh, Subbu >> Cc: linux-omap@vger.kernel.org; Shah, Hardik; tomi.valkei...@nokia.com >> Subject: Re: DSS2: How to test TV and LCD output simulatenously >> >> Venkatesh, Subbu wrote: >>> Hi, >>> I have DSS2 ported on LDP board, I could manage to get output display on TV >>> and LCD interface individually, also tested some of the features like >>> Rotation and Mirroring, they worked with out any problem. >> What does "DSS2 ported on LDP board" mean? What source tree/branch did you >> use? >> >>> Now I am trying to get output both on TV and LCD simultaneously, >>> >>> I was not successful with my approach that I tried, like >>> >>> 1. Boot the kernel with the default LCD display >>> 2. Then I enabled ntsc timings for TV, as PAL do not work on it. >>> #echo ntsc > /sys/devices/platform/omapdss/display1/timings >>> 3. Enabled TV >>> # echo 1 > /sys/devices/platform/omapdss/display1/enable >>> and did the common fb test.... >>> But it did not seem to work. >>> Its nice if someone has different working approach or can suggest me where >>> I am going wrong in the above steps. >> Is this stuff documented somewhere? Like the difference >> between DSS1 and DSS2? How the various layers and overlays >> are supposed to work? What about the camera interface? -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
