* Vikram Pandita <[email protected]> [090612 15:43]:
> For OMAP3 add MMC1 MMC2 and MMC3 pin mux
>
> Signed-off-by: Chikkature Rajashekar <[email protected]>
> Signed-off-by: Vikram Pandita <[email protected]>
> ---
> arch/arm/mach-omap2/devices.c | 33 ++++++++++++++++++++++
> arch/arm/mach-omap2/mux.c | 49
> +++++++++++++++++++++++++++++++++
> arch/arm/plat-omap/include/mach/mux.h | 28 +++++++++++++++++++
> 3 files changed, 110 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
> index 894cc35..f86cb1f 100644
> --- a/arch/arm/mach-omap2/devices.c
> +++ b/arch/arm/mach-omap2/devices.c
> @@ -513,6 +513,39 @@ static inline void omap2_mmc_mux(struct
> omap_mmc_platform_data *mmc_controller,
> omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
> }
> }
> +
> + if (cpu_is_omap3430()) {
> + if (controller_nr == 0) {
> + omap_cfg_reg(N28_3430_MMC1_CLK);
> + omap_cfg_reg(M27_3430_MMC1_CMD);
> + omap_cfg_reg(N27_3430_MMC1_DAT0);
> + omap_cfg_reg(N26_3430_MMC1_DAT1);
> + omap_cfg_reg(N25_3430_MMC1_DAT2);
> + omap_cfg_reg(P28_3430_MMC1_DAT3);
> + omap_cfg_reg(P27_3430_MMC1_DAT4);
> + omap_cfg_reg(P26_3430_MMC1_DAT5);
> + omap_cfg_reg(R27_3430_MMC1_DAT6);
> + omap_cfg_reg(R25_3430_MMC1_DAT7);
> + }
> + if (controller_nr == 1) {
> + /* MMC2 */
> + omap_cfg_reg(AE2_3430_MMC2_CLK);
> + omap_cfg_reg(AG5_3430_MMC2_CMD);
> + omap_cfg_reg(AH5_3430_MMC2_DAT0);
> + omap_cfg_reg(AH4_3430_MMC2_DAT1);
> + omap_cfg_reg(AG4_3430_MMC2_DAT2);
> + omap_cfg_reg(AF4_3430_MMC2_DAT3);
> + }
> + if (controller_nr == 2) {
> + /* MMC3 */
> + omap_cfg_reg(AF10_3430_MMC3_CLK);
> + omap_cfg_reg(AC3_3430_MMC3_CMD);
> + omap_cfg_reg(AE11_3430_MMC3_DAT0);
> + omap_cfg_reg(AH9_3430_MMC3_DAT1);
> + omap_cfg_reg(AF13_3430_MMC3_DAT2);
> + omap_cfg_reg(AF13_3430_MMC3_DAT3);
> + }
> + }
> }
Great, just one issue: All data pins may not be connected, so you
need to look at wires in struct omap_mmc_slot_data to see how many
data pins to mux.
Regards,
Tony
> void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
> diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
> index 026c4fc..d49b9a7 100644
> --- a/arch/arm/mach-omap2/mux.c
> +++ b/arch/arm/mach-omap2/mux.c
> @@ -486,6 +486,55 @@ MUX_CFG_34XX("H19_34XX_GPIO164_OUT", 0x19c,
> OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
> MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6,
> OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
> +/* MMC1 */
> +MUX_CFG_34XX("N28_3430_MMC1_CLK", 0x144,
> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
> +MUX_CFG_34XX("M27_3430_MMC1_CMD", 0x146,
> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
> +MUX_CFG_34XX("N27_3430_MMC1_DAT0", 0x148,
> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
> +MUX_CFG_34XX("N26_3430_MMC1_DAT1", 0x14a,
> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
> +MUX_CFG_34XX("N25_3430_MMC1_DAT2", 0x14c,
> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
> +MUX_CFG_34XX("P28_3430_MMC1_DAT3", 0x14e,
> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
> +MUX_CFG_34XX("P27_3430_MMC1_DAT4", 0x150,
> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
> +MUX_CFG_34XX("P26_3430_MMC1_DAT5", 0x152,
> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
> +MUX_CFG_34XX("R27_3430_MMC1_DAT6", 0x154,
> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
> +MUX_CFG_34XX("R25_3430_MMC1_DAT7", 0x156,
> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
> +
> +/* MMC2 */
> +MUX_CFG_34XX("AE2_3430_MMC2_CLK", 0x158,
> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
> +MUX_CFG_34XX("AG5_3430_MMC2_CMD", 0x15A,
> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
> +MUX_CFG_34XX("AH5_3430_MMC2_DAT0", 0x15c,
> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
> +MUX_CFG_34XX("AH4_3430_MMC2_DAT1", 0x15e,
> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
> +MUX_CFG_34XX("AG4_3430_MMC2_DAT2", 0x160,
> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
> +MUX_CFG_34XX("AF4_3430_MMC2_DAT3", 0x162,
> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
> +
> +/* MMC3 */
> +MUX_CFG_34XX("AF10_3430_MMC3_CLK", 0x5d8,
> + OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
> +MUX_CFG_34XX("AC3_3430_MMC3_CMD", 0x1d0,
> + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLUP)
> +MUX_CFG_34XX("AE11_3430_MMC3_DAT0", 0x5e4,
> + OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
> +MUX_CFG_34XX("AH9_3430_MMC3_DAT1", 0x5e6,
> + OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
> +MUX_CFG_34XX("AF13_3430_MMC3_DAT2", 0x5e8,
> + OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
> +MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2,
> + OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
> };
>
> #define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins)
> diff --git a/arch/arm/plat-omap/include/mach/mux.h
> b/arch/arm/plat-omap/include/mach/mux.h
> index 85a6217..d24fdf9 100644
> --- a/arch/arm/plat-omap/include/mach/mux.h
> +++ b/arch/arm/plat-omap/include/mach/mux.h
> @@ -853,6 +853,34 @@ enum omap34xx_index {
> AE5_34XX_GPIO143,
> H19_34XX_GPIO164_OUT,
> J25_34XX_GPIO170,
> +
> + /* MMC1 */
> + N28_3430_MMC1_CLK,
> + M27_3430_MMC1_CMD,
> + N27_3430_MMC1_DAT0,
> + N26_3430_MMC1_DAT1,
> + N25_3430_MMC1_DAT2,
> + P28_3430_MMC1_DAT3,
> + P27_3430_MMC1_DAT4,
> + P26_3430_MMC1_DAT5,
> + R27_3430_MMC1_DAT6,
> + R25_3430_MMC1_DAT7,
> +
> + /* MMC2 */
> + AE2_3430_MMC2_CLK,
> + AG5_3430_MMC2_CMD,
> + AH5_3430_MMC2_DAT0,
> + AH4_3430_MMC2_DAT1,
> + AG4_3430_MMC2_DAT2,
> + AF4_3430_MMC2_DAT3,
> +
> + /* MMC3 */
> + AF10_3430_MMC3_CLK,
> + AC3_3430_MMC3_CMD,
> + AE11_3430_MMC3_DAT0,
> + AH9_3430_MMC3_DAT1,
> + AF13_3430_MMC3_DAT2,
> + AF13_3430_MMC3_DAT3,
> };
>
> struct omap_mux_cfg {
> --
> 1.6.0.3.613.g9f8f13
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
