* Hugo Vincent <[email protected]> [090615 03:44]:
>
> On 15/06/2009, at 8:12 PM, Tony Lindgren wrote:
>
>> * Vikram Pandita <[email protected]> [090612 15:43]:
>>> For OMAP3 add MMC1 MMC2 and MMC3 pin mux
>>>
>>> Signed-off-by: Chikkature Rajashekar <[email protected]>
>>> Signed-off-by: Vikram Pandita <[email protected]>
>>> ---
>>> arch/arm/mach-omap2/devices.c | 33 ++++++++++++++++++++++
>>> arch/arm/mach-omap2/mux.c | 49 +++++++++++++++++++++++
>>> ++++++++++
>>> arch/arm/plat-omap/include/mach/mux.h | 28 +++++++++++++++++++
>>> 3 files changed, 110 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/
>>> devices.c
>>> index 894cc35..f86cb1f 100644
>>> --- a/arch/arm/mach-omap2/devices.c
>>> +++ b/arch/arm/mach-omap2/devices.c
>>> @@ -513,6 +513,39 @@ static inline void omap2_mmc_mux(struct
>>> omap_mmc_platform_data *mmc_controller,
>>> omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
>>> }
>>> }
>>> +
>>> + if (cpu_is_omap3430()) {
>>> + if (controller_nr == 0) {
>>> + omap_cfg_reg(N28_3430_MMC1_CLK);
>>> + omap_cfg_reg(M27_3430_MMC1_CMD);
>>> + omap_cfg_reg(N27_3430_MMC1_DAT0);
>>> + omap_cfg_reg(N26_3430_MMC1_DAT1);
>>> + omap_cfg_reg(N25_3430_MMC1_DAT2);
>>> + omap_cfg_reg(P28_3430_MMC1_DAT3);
>>> + omap_cfg_reg(P27_3430_MMC1_DAT4);
>>> + omap_cfg_reg(P26_3430_MMC1_DAT5);
>>> + omap_cfg_reg(R27_3430_MMC1_DAT6);
>>> + omap_cfg_reg(R25_3430_MMC1_DAT7);
>>> + }
>>> + if (controller_nr == 1) {
>>> + /* MMC2 */
>>> + omap_cfg_reg(AE2_3430_MMC2_CLK);
>>> + omap_cfg_reg(AG5_3430_MMC2_CMD);
>>> + omap_cfg_reg(AH5_3430_MMC2_DAT0);
>>> + omap_cfg_reg(AH4_3430_MMC2_DAT1);
>>> + omap_cfg_reg(AG4_3430_MMC2_DAT2);
>>> + omap_cfg_reg(AF4_3430_MMC2_DAT3);
>>> + }
>>> + if (controller_nr == 2) {
>>> + /* MMC3 */
>>> + omap_cfg_reg(AF10_3430_MMC3_CLK);
>>> + omap_cfg_reg(AC3_3430_MMC3_CMD);
>>> + omap_cfg_reg(AE11_3430_MMC3_DAT0);
>>> + omap_cfg_reg(AH9_3430_MMC3_DAT1);
>>> + omap_cfg_reg(AF13_3430_MMC3_DAT2);
>>> + omap_cfg_reg(AF13_3430_MMC3_DAT3);
>>> + }
>>> + }
>>> }
>>
>> Great, just one issue: All data pins may not be connected, so you
>> need to look at wires in struct omap_mmc_slot_data to see how many
>> data pins to mux.
>
> There is another issue: different mux-outs are possible for different
> board layouts; for example, I'm using AE10_3430_MMC3_CMD instead of
> AC3_3430_MMC3_CMD. I'm not sure what the best way of handling this is,
> but at a minimum, perhaps make mux setting optional, e.g. add no_mux to
> struct omap_mmc_slot_data.
Hmm, yeah that's right. I guess only the common pins should be muxed
in devices.c, and any optional pins should be muxed in the board-*.c
files.
Tony
>
> Hugo
>
>>
>> Regards,
>>
>> Tony
>>
>>
>>> void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
>>> diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
>>> index 026c4fc..d49b9a7 100644
>>> --- a/arch/arm/mach-omap2/mux.c
>>> +++ b/arch/arm/mach-omap2/mux.c
>>> @@ -486,6 +486,55 @@ MUX_CFG_34XX("H19_34XX_GPIO164_OUT", 0x19c,
>>> OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
>>> MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6,
>>> OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
>>> +/* MMC1 */
>>> +MUX_CFG_34XX("N28_3430_MMC1_CLK", 0x144,
>>> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
>>> +MUX_CFG_34XX("M27_3430_MMC1_CMD", 0x146,
>>> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
>>> +MUX_CFG_34XX("N27_3430_MMC1_DAT0", 0x148,
>>> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
>>> +MUX_CFG_34XX("N26_3430_MMC1_DAT1", 0x14a,
>>> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
>>> +MUX_CFG_34XX("N25_3430_MMC1_DAT2", 0x14c,
>>> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
>>> +MUX_CFG_34XX("P28_3430_MMC1_DAT3", 0x14e,
>>> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
>>> +MUX_CFG_34XX("P27_3430_MMC1_DAT4", 0x150,
>>> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
>>> +MUX_CFG_34XX("P26_3430_MMC1_DAT5", 0x152,
>>> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
>>> +MUX_CFG_34XX("R27_3430_MMC1_DAT6", 0x154,
>>> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
>>> +MUX_CFG_34XX("R25_3430_MMC1_DAT7", 0x156,
>>> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
>>> +
>>> +/* MMC2 */
>>> +MUX_CFG_34XX("AE2_3430_MMC2_CLK", 0x158,
>>> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
>>> +MUX_CFG_34XX("AG5_3430_MMC2_CMD", 0x15A,
>>> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
>>> +MUX_CFG_34XX("AH5_3430_MMC2_DAT0", 0x15c,
>>> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
>>> +MUX_CFG_34XX("AH4_3430_MMC2_DAT1", 0x15e,
>>> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
>>> +MUX_CFG_34XX("AG4_3430_MMC2_DAT2", 0x160,
>>> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
>>> +MUX_CFG_34XX("AF4_3430_MMC2_DAT3", 0x162,
>>> + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
>>> +
>>> +/* MMC3 */
>>> +MUX_CFG_34XX("AF10_3430_MMC3_CLK", 0x5d8,
>>> + OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
>>> +MUX_CFG_34XX("AC3_3430_MMC3_CMD", 0x1d0,
>>> + OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLUP)
>>> +MUX_CFG_34XX("AE11_3430_MMC3_DAT0", 0x5e4,
>>> + OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
>>> +MUX_CFG_34XX("AH9_3430_MMC3_DAT1", 0x5e6,
>>> + OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
>>> +MUX_CFG_34XX("AF13_3430_MMC3_DAT2", 0x5e8,
>>> + OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
>>> +MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2,
>>> + OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
>>> };
>>>
>>> #define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins)
>>> diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-
>>> omap/include/mach/mux.h
>>> index 85a6217..d24fdf9 100644
>>> --- a/arch/arm/plat-omap/include/mach/mux.h
>>> +++ b/arch/arm/plat-omap/include/mach/mux.h
>>> @@ -853,6 +853,34 @@ enum omap34xx_index {
>>> AE5_34XX_GPIO143,
>>> H19_34XX_GPIO164_OUT,
>>> J25_34XX_GPIO170,
>>> +
>>> + /* MMC1 */
>>> + N28_3430_MMC1_CLK,
>>> + M27_3430_MMC1_CMD,
>>> + N27_3430_MMC1_DAT0,
>>> + N26_3430_MMC1_DAT1,
>>> + N25_3430_MMC1_DAT2,
>>> + P28_3430_MMC1_DAT3,
>>> + P27_3430_MMC1_DAT4,
>>> + P26_3430_MMC1_DAT5,
>>> + R27_3430_MMC1_DAT6,
>>> + R25_3430_MMC1_DAT7,
>>> +
>>> + /* MMC2 */
>>> + AE2_3430_MMC2_CLK,
>>> + AG5_3430_MMC2_CMD,
>>> + AH5_3430_MMC2_DAT0,
>>> + AH4_3430_MMC2_DAT1,
>>> + AG4_3430_MMC2_DAT2,
>>> + AF4_3430_MMC2_DAT3,
>>> +
>>> + /* MMC3 */
>>> + AF10_3430_MMC3_CLK,
>>> + AC3_3430_MMC3_CMD,
>>> + AE11_3430_MMC3_DAT0,
>>> + AH9_3430_MMC3_DAT1,
>>> + AF13_3430_MMC3_DAT2,
>>> + AF13_3430_MMC3_DAT3,
>>> };
>>>
>>> struct omap_mux_cfg {
>>> --
>>> 1.6.0.3.613.g9f8f13
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-
>>> omap" in
>>> the body of a message to [email protected]
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-omap"
>> in
>> the body of a message to [email protected]
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
