On Wed, Jun 24, 2009 at 08:57:56AM +0100, Russell King - ARM Linux wrote:
> On Wed, Jun 24, 2009 at 01:16:52PM +0530, Shilimkar, Santosh wrote:
> > After digging a bit, the proposed twl_irq change would need some major
> > changes.
> >
> > 1. All the T2(TWL)drivers ( rtc, madc, bci, gpio, keypad, usb, mmc)needs
> > modification.Currently twl_irq fw implements kind of "twl4030_irq_chip"
> > which allows all the T2 drivers to get virtual interrupt numbers and can
> > make use of standard "request_irq" linux api.
>
> You can still use virtual interrupt numbers. All you're changing is
> _how_ you're handling the interrupts internally.
>
> I'll see about creating a patch tomorrow.
And here it is - I've only build-tested it so far.
drivers/mfd/twl4030-irq.c | 55 ++++++++++++++++++--------------------------
1 files changed, 23 insertions(+), 32 deletions(-)
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index bae61b2..4bb1ea7 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -180,15 +180,9 @@ static struct completion irq_event;
static int twl4030_irq_thread(void *data)
{
long irq = (long)data;
- struct irq_desc *desc = irq_to_desc(irq);
static unsigned i2c_errors;
static const unsigned max_i2c_errors = 100;
- if (!desc) {
- pr_err("twl4030: Invalid IRQ: %ld\n", irq);
- return -EINVAL;
- }
-
current->flags |= PF_NOFREEZE;
while (!kthread_should_stop()) {
@@ -240,38 +234,25 @@ static int twl4030_irq_thread(void *data)
}
local_irq_enable();
- desc->chip->unmask(irq);
+ enable_irq(irq);
}
return 0;
}
/*
- * handle_twl4030_pih() is the desc->handle method for the twl4030 interrupt.
- * This is a chained interrupt, so there is no desc->action method for it.
+ * handle_twl4030_pih() is the handler for the main twl4030 interrupt.
* Now we need to query the interrupt controller in the twl4030 to determine
* which module is generating the interrupt request. However, we can't do i2c
* transactions in interrupt context, so we must defer that work to a kernel
* thread. All we do here is acknowledge and mask the interrupt and wakeup
* the kernel thread.
*/
-static void handle_twl4030_pih(unsigned int irq, struct irq_desc *desc)
-{
- /* Acknowledge, clear *AND* mask the interrupt... */
- desc->chip->ack(irq);
- complete(&irq_event);
-}
-
-static struct task_struct *start_twl4030_irq_thread(long irq)
+static irqreturn_t handle_twl4030_pih(int irq, void *devid)
{
- struct task_struct *thread;
-
- init_completion(&irq_event);
- thread = kthread_run(twl4030_irq_thread, (void *)irq, "twl4030-irq");
- if (!thread)
- pr_err("twl4030: could not create irq %ld thread!\n", irq);
-
- return thread;
+ disable_irq_nosync(irq);
+ complete(devid);
+ return IRQ_HANDLED;
}
/*----------------------------------------------------------------------*/
@@ -734,18 +715,28 @@ int twl_init_irq(int irq_num, unsigned irq_base, unsigned
irq_end)
}
/* install an irq handler to demultiplex the TWL4030 interrupt */
- task = start_twl4030_irq_thread(irq_num);
- if (!task) {
- pr_err("twl4030: irq thread FAIL\n");
- status = -ESRCH;
- goto fail;
+ init_completion(&irq_event);
+
+ status = request_irq(irq_num, handle_twl4030_pih, IRQF_DISABLED,
+ "TWL4030-PIH", &irq_event);
+ if (status < 0) {
+ pr_err("twl4030: could not claim irq%d: %d\n", irq_num, status);
+ goto fail_rqirq;
}
- set_irq_data(irq_num, task);
- set_irq_chained_handler(irq_num, handle_twl4030_pih);
+ task = kthread_run(twl4030_irq_thread, (void *)irq_num, "twl4030-irq");
+ if (IS_ERR(task)) {
+ pr_err("twl4030: could not create irq %d thread!\n", irq_num);
+ status = PTR_ERR(task);
+ goto fail_kthread;
+ }
return status;
+fail_kthread:
+ free_irq(irq_num, &irq_event);
+fail_rqirq:
+ /* clean up twl4030_sih_setup */
fail:
for (i = irq_base; i < irq_end; i++)
set_irq_chip_and_handler(i, NULL, NULL);
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
