Russell,
> drivers/mfd/twl4030-irq.c | 55
> ++++++++++++++++++--------------------------
> 1 files changed, 23 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
> index bae61b2..4bb1ea7 100644
> --- a/drivers/mfd/twl4030-irq.c
> +++ b/drivers/mfd/twl4030-irq.c
> @@ -180,15 +180,9 @@ static struct completion irq_event;
> static int twl4030_irq_thread(void *data)
> {
> long irq = (long)data;
> - struct irq_desc *desc = irq_to_desc(irq);
> static unsigned i2c_errors;
> static const unsigned max_i2c_errors = 100;
>
> - if (!desc) {
> - pr_err("twl4030: Invalid IRQ: %ld\n", irq);
> - return -EINVAL;
> - }
> -
> current->flags |= PF_NOFREEZE;
>
> while (!kthread_should_stop()) {
> @@ -240,38 +234,25 @@ static int twl4030_irq_thread(void *data)
> }
> local_irq_enable();
>
> - desc->chip->unmask(irq);
> + enable_irq(irq);
> }
>
> return 0;
> }
>
> /*
> - * handle_twl4030_pih() is the desc->handle method for the
> twl4030 interrupt.
> - * This is a chained interrupt, so there is no desc->action
> method for it.
> + * handle_twl4030_pih() is the handler for the main twl4030
> interrupt.
> * Now we need to query the interrupt controller in the
> twl4030 to determine
> * which module is generating the interrupt request.
> However, we can't do i2c
> * transactions in interrupt context, so we must defer that
> work to a kernel
> * thread. All we do here is acknowledge and mask the
> interrupt and wakeup
> * the kernel thread.
> */
> -static void handle_twl4030_pih(unsigned int irq, struct
> irq_desc *desc)
> -{
> - /* Acknowledge, clear *AND* mask the interrupt... */
> - desc->chip->ack(irq);
> - complete(&irq_event);
> -}
> -
> -static struct task_struct *start_twl4030_irq_thread(long irq)
> +static irqreturn_t handle_twl4030_pih(int irq, void *devid)
> {
> - struct task_struct *thread;
> -
> - init_completion(&irq_event);
> - thread = kthread_run(twl4030_irq_thread, (void *)irq,
> "twl4030-irq");
> - if (!thread)
> - pr_err("twl4030: could not create irq %ld
> thread!\n", irq);
> -
> - return thread;
> + disable_irq_nosync(irq);
> + complete(devid);
> + return IRQ_HANDLED;
> }
>
>
> /*------------------------------------------------------------
> ----------*/
> @@ -734,18 +715,28 @@ int twl_init_irq(int irq_num, unsigned
> irq_base, unsigned irq_end)
> }
>
> /* install an irq handler to demultiplex the TWL4030
> interrupt */
> - task = start_twl4030_irq_thread(irq_num);
> - if (!task) {
> - pr_err("twl4030: irq thread FAIL\n");
> - status = -ESRCH;
> - goto fail;
> + init_completion(&irq_event);
> +
> + status = request_irq(irq_num, handle_twl4030_pih, IRQF_DISABLED,
> + "TWL4030-PIH", &irq_event);
> + if (status < 0) {
> + pr_err("twl4030: could not claim irq%d: %d\n",
> irq_num, status);
> + goto fail_rqirq;
> }
>
> - set_irq_data(irq_num, task);
> - set_irq_chained_handler(irq_num, handle_twl4030_pih);
> + task = kthread_run(twl4030_irq_thread, (void *)irq_num,
> "twl4030-irq");
> + if (IS_ERR(task)) {
> + pr_err("twl4030: could not create irq %d
> thread!\n", irq_num);
> + status = PTR_ERR(task);
> + goto fail_kthread;
> + }
>
> return status;
>
> +fail_kthread:
> + free_irq(irq_num, &irq_event);
> +fail_rqirq:
> + /* clean up twl4030_sih_setup */
> fail:
> for (i = irq_base; i < irq_end; i++)
> set_irq_chip_and_handler(i, NULL, NULL);I have tested this patch on OMAP3430SDP with Triton RTC module and works well. Thanks!! Kevin/Vikram, Can this patch be included on omap_pm branch to check for any regression? Regards, Santosh
twl_mainline_irq.patch
Description: twl_mainline_irq.patch
