Anand Gadiyar <[email protected]> writes:

> MUSB: Remove usb_musb_pm_init() call
>
> In usb_musb_pm_init, we attempt to access an MUSB register
> when the i-clock may not be on, or the module is otherwise
> not accessible.
>
> We need to either:
> - enable the clock before this access, or
> - remove this code and move it to the bootloader, or
> - enable the clock in the bootloader
>
> If we enable the clock in the bootloader, we might as well
> add the workaround in the bootloader itself. This code will
> anyway be changed once hwmod is in place, so remove it for now
>
> This allows us to boot the kernel on certain OMAP3 boards with
> a bootloader that doesn't enable this clock. Without this, we
> will need to upgrade the bootloaders on these boards.
>
> Signed-off-by: Anand Gadiyar <[email protected]>

NAK.

The PM branch already has a fix from Jon Hunter[1] for this which enables
the clock, and in the thread where we discussed this I mentioned I would
carry it in the PM branch until the hwmod for OTG is ready.

Kevin

[1] http://marc.info/?l=linux-omap&m=125020202601759&w=2


>  arch/arm/mach-omap2/usb-musb.c |   12 ------------
>  1 files changed, 12 deletions(-)
>
> Index: linux-2.6/arch/arm/mach-omap2/usb-musb.c
> ===================================================================
> --- linux-2.6.orig/arch/arm/mach-omap2/usb-musb.c
> +++ linux-2.6/arch/arm/mach-omap2/usb-musb.c
> @@ -31,15 +31,6 @@
>  #include <mach/mux.h>
>  #include <mach/usb.h>
>  
> -#define OTG_SYSCONFIG        (OMAP34XX_HSUSB_OTG_BASE + 0x404)
> -
> -static void __init usb_musb_pm_init(void)
> -{
> -     /* Ensure force-idle mode for OTG controller */
> -     if (cpu_is_omap34xx())
> -             omap_writel(0, OTG_SYSCONFIG);
> -}
> -
>  #ifdef CONFIG_USB_MUSB_SOC
>  
>  static struct resource musb_resources[] = {
> @@ -194,13 +185,10 @@ void __init usb_musb_init(void)
>               printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
>               return;
>       }
> -
> -     usb_musb_pm_init();
>  }
>  
>  #else
>  void __init usb_musb_init(void)
>  {
> -     usb_musb_pm_init();
>  }
>  #endif /* CONFIG_USB_MUSB_SOC */
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [email protected]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to