"Gadiyar, Anand" <[email protected]> writes: >> > MUSB: Remove usb_musb_pm_init() call >> > >> > In usb_musb_pm_init, we attempt to access an MUSB register >> > when the i-clock may not be on, or the module is otherwise >> > not accessible. >> > >> > We need to either: >> > - enable the clock before this access, or >> > - remove this code and move it to the bootloader, or >> > - enable the clock in the bootloader >> > >> > If we enable the clock in the bootloader, we might as well >> > add the workaround in the bootloader itself. This code will >> > anyway be changed once hwmod is in place, so remove it for now >> > >> > This allows us to boot the kernel on certain OMAP3 boards with >> > a bootloader that doesn't enable this clock. Without this, we >> > will need to upgrade the bootloaders on these boards. >> > >> > Signed-off-by: Anand Gadiyar <[email protected]> >> >> NAK. >> >> The PM branch already has a fix from Jon Hunter[1] for this which enables >> the clock, and in the thread where we discussed this I mentioned I would >> carry it in the PM branch until the hwmod for OTG is ready. > > Right, but at least merge this into master and mainline for now, > so that boards that used to boot up okay before can continue to do so now. > > Not everybody is working on the pm branch.
ok, I understand now. Was thinking you meant this for the PM branch. Sorry for the confusion. I'll pull this into my fixes queue for the next merge window. Thanks, Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
