> -----Original Message----- > From: [email protected] [mailto:linux-omap- > [email protected]] On Behalf Of Felipe Balbi > Sent: Tuesday, September 01, 2009 9:58 PM > To: ext Gary Thomas > Cc: [email protected]; Paul Walmsley > Subject: Re: USB confusion > > On Tue, Sep 01, 2009 at 02:20:13PM +0200, ext Gary Thomas wrote: > > Following up on this, I made sure that CONFIG_USB_EHCI_HCD was defined. > > > > Now I see these messages: > > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > > Clock usbhost_48m_fck didn't enable in 100000 tries > > ehci-omap: probe of ehci-omap.0 failed with error -22 > > > > Any ideas what else I might be missing? > > check what happens with that clock. Why is that timing out ? > > I believe that message comes from clk fw. Maybe Paul could > give us some hint. Paul ?
I faced similar issue and it got solved with increased timeout value. Patch is already submitted for this: [PATCH 5/9] ehci: increase timeout to fix ehci failure http://marc.info/?l=linux-omap&m=124956053919660&w=2 -Ajay > > -- > balbi > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
