OMAP3EVM (Rev >= E) has EHCI port on main board itself. Apart from this
there is a slot to connect Mistral Daughter Card (MDC) to it which also
has one EHCI port. Only one EHCI port can be used at a time and we can
choose the port using GPIO61.
These are the new GPIO lines used for different purpose on EHCI interface.
- GPIO21 - EHCI phy reset
- GPIO22 - EHCI VBUS enable
- GPIO61 - Selects EHCI port either on main board or on Mistral
Daughter Card (MDC).
Signed-off-by: Ajay Kumar Gupta <[email protected]>
---
arch/arm/mach-omap2/mux.c | 7 +++++++
arch/arm/plat-omap/include/plat/mux.h | 5 +++++
2 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 32c953e..00ad592 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -551,6 +551,13 @@ MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2,
MUX_CFG_34XX("AF26_34XX_SYS_NIRQ", 0x1E0,
OMAP3_WAKEUP_EN | OMAP34XX_PIN_INPUT_PULLUP |
OMAP34XX_MUX_MODE0)
+/* EHCI GPIO's on OMAP3EVM (Rev >= E) */
+MUX_CFG_34XX("AH14_34XX_GPIO21", 0x5ea,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AF9_34XX_GPIO22", 0x5ec,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("U3_34XX_GPIO61", 0x0c8,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
};
#define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins)
diff --git a/arch/arm/plat-omap/include/plat/mux.h
b/arch/arm/plat-omap/include/plat/mux.h
index f3c1d8a..8316d4f 100644
--- a/arch/arm/plat-omap/include/plat/mux.h
+++ b/arch/arm/plat-omap/include/plat/mux.h
@@ -840,6 +840,11 @@ enum omap34xx_index {
/* SYS_NIRQ T2 INT1 */
AF26_34XX_SYS_NIRQ,
+
+ /* EHCI GPIO's for OMAP3EVM (Rev >= E) */
+ AH14_34XX_GPIO21,
+ AF9_34XX_GPIO22,
+ U3_34XX_GPIO61,
};
struct omap_mux_cfg {
--
1.6.2.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
