----- Original Message -----
From: "Premi, Sanjeev" <pr...@ti.com>
To: "Dasgupta, Romit" <ro...@ti.com>
Cc: <linux-omap@vger.kernel.org>
Sent: Friday, November 27, 2009 3:20 PM
Subject: RE: omap3evm: touchscreen delays on pm branch
-----Original Message-----
From: Dasgupta, Romit
Sent: Friday, November 27, 2009 2:38 PM
To: Premi, Sanjeev
Cc: linux-omap@vger.kernel.org
Subject: RE: omap3evm: touchscreen delays on pm branch
On Fri, 2009-11-27 at 14:11 +0530, Premi, Sanjeev wrote:
> > -----Original Message-----
> > From: Dasgupta, Romit
> > Sent: Friday, November 27, 2009 2:10 PM
> > To: Premi, Sanjeev
> > Cc: linux-omap@vger.kernel.org
> > Subject: Re: omap3evm: touchscreen delays on pm branch
> >
> > Premi, Sanjeev wrote:
> > > Hi,
> > >
> > > I am finding the response of touchscreen on the
omap3evm very slow.
> > >
> > > Here is my test:
> > > On console, I run : watch -n2 "cat /proc/interrupts"
> > > Then, I tap the touchscreen approximately once per
second. However,
> > > (usually) no interrupts are registered. As I increase
the frequency
> > > of 'taps' more and more interrupts are registered. But still not
> > > matching exact taps.
> > >
> > > However, when I keep the cpu busy with "cat /dev/zero >
/dev/null &"
> > > each tap is recognized.
> > >
> > Do you see this even if we don't enable OFF?
> >
> Yes. Sleep_while_idle=0; enable_off_mode=0
> ~sanjeev
Hopefully you have the same TSC driver. Nevertheless, can you
please try
this (just to see if clock domain idling is causing any
problem or not):
It is the same driver at SDP3430. I had earlier tried removing
cpuidle altogether and did not see this issue. I too believe that
issue is caused by clocks being going to (auto)idle.
But then, Hemanth should be seeing the same behavior.
Zoom2/Zoom3 use a different touchscreen driver compared to SDP.
Its uses Synaptic Touchscreen over I2C.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
