Luke-Jr wrote: > > Tested on Nokia N810 in Linux-OMAP tree. Mainline is not bootable yet. >
Hi Luke, I'm with some problems to boot-up latest l-o(commit abb74381235a05f15a3b07e9e3831034942c67fb) with n810. The error message can be found below and full boot output in the end of email. dsme: No correct bootreason found, entering the malfunction state I'm not sure if it's related with kernel or rootfs. I tried different distros(Maemo,Angstrom,Mamona and Mer) and I got the same problem using this kernel. What rootfs do you use? Did you change initfs? Any idea/help? Thanks in advance, Alecrim. PS: 2.6.30-rc8 is the last kernel version that I got working (http://www.natisbad.org/N810/index.html) Uncompressing Linux.............................................................................. done, booting the kernel. [ 0.000000] Linux version 2.6.33-rc2-06901-gabb7438 (alec...@alecrim) (gcc version 4.3.2 (Sourcery G++ Lite 2008q3-72) ) #53 Tue Jan 5 18:35:16 AMT 2010 [ 0.000000] CPU: ARMv6-compatible processor [4107b362] revision 2 (ARMv6TEJ), cr=00c5387f [ 0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Nokia N810 [ 0.000000] Ignoring unrecognised tag 0x414f4d50 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] OMAP2420 [ 0.000000] [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: root=1f03 rootfstype=jffs2 console=ttyS2,115200 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 64MB 64MB = 128MB total [ 0.000000] Memory: 127316KB available (2088K code, 184K data, 96K init, 0K highmem) [ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:368 [ 0.000000] Clocking rate (Crystal/DPLL/MPU): 19.2/658/329 MHz [ 0.000000] GPMC revision 2.0 [ 0.000000] IRQ: Found an INTC at 0xfa0fe000 (revision 2.0) with 96 interrupts [ 0.000000] Total of 96 interrupts on 1 active controller [ 0.000000] OMAP GPIO hardware version 1.8 [ 0.000000] OMAP clockevent source: GPTIMER1 at 32000 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Calibrating delay loop... 320.37 BogoMIPS (lpj=1253376) [ 0.000000] Mount-cache hash table entries: 512 [ 0.000000] CPU: Testing write buffer coherency: ok [ 0.000000] NET: Registered protocol family 16 [ 307.198364] OMAP DMA hardware revision 2.0 [ 307.216583] bio: create slab <bio-0> at 0 [ 307.221252] usbcore: registered new interface driver usbfs [ 307.222290] usbcore: registered new interface driver hub [ 307.222869] usbcore: registered new device driver usb [ 307.225250] Switching to clocksource 32k_counter [ 307.229980] musb_hdrc: version 6.0, tusb-omap-dma, peripheral, debug=0 [ 307.230895] NET: Registered protocol family 2 [ 307.231140] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 307.231597] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 307.231872] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 307.232116] TCP: Hash tables configured (established 4096 bind 4096) [ 307.232147] TCP reno registered [ 307.232177] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 307.232238] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 307.232513] NET: Registered protocol family 1 [ 307.234924] NetWinder Floating Point Emulator V0.97 (double precision) [ 307.267059] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 307.269897] msgmni has been set to 248 [ 307.270019] io scheduler noop registered [ 307.271697] io scheduler cfq registered (default) [ 307.310852] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 307.334625] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654 [ 307.355895] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654 [ 307.376953] serial8250.2: ttyS2 at MMIO 0x4806e000 (irq = 74) is a ST16654 [ 307.685607] console [ttyS2] enabled [ 307.712738] brd: module loaded [ 307.716278] OneNAND driver initializing [ 307.720794] omap2-onenand omap2-onenand: initializing on CS0, phys base 0x04000000, virtual base c8880000 [ 307.730560] Muxed OneNAND 256MB 1.8V 16-bit (0x40) [ 307.735382] OneNAND version = 0x0022 [ 307.740570] Scanning device for bad blocks [ 307.754882] onenand_bbt_wait: ecc error = 0x2222, controller error 0x2440 [ 307.761840] Bad eraseblock 183 at 0x016e0000 [ 307.836791] onenand_bbt_wait: ecc error = 0x2222, controller error 0x2440 [ 307.843658] Bad eraseblock 1461 at 0x0b6a0000 [ 307.880462] Creating 5 MTD partitions on "omap2-onenand": [ 307.885925] 0x000000000000-0x000000020000 : "bootloader" [ 307.891998] 0x000000020000-0x000000080000 : "config" [ 307.897674] 0x000000080000-0x000000280000 : "kernel" [ 307.903442] 0x000000280000-0x000000680000 : "initfs" [ 307.909149] 0x000000680000-0x000010000000 : "rootfs" [ 307.917602] mice: PS/2 mouse device common for all mice [ 307.923004] TCP cubic registered [ 307.927215] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 2 [ 308.001525] VFS: Mounted root (jffs2 filesystem) on device 31:3. [ 308.007781] Freeing init memory: 96K BusyBox v1.00 (2008.10.21-06:19+0000) multi-call binary Usage: mknod [OPTIONS] NAME TYPE MAJOR MINOR Create a special file (block, character, or pipe). Options: -m create the special file using the specified mode (default a=rw) TYPEs include: b: Make a block (buffered) device. c or u: Make a character (un-buffered) device. p: Make a named pipe. MAJOR and MINOR are ignored for named pipes. BusyBox v1.00 (2008.10.21-06:19+0000) multi-call binary Usage: mknod [OPTIONS] NAME TYPE MAJOR MINOR Create a special file (block, character, or pipe). Options: -m create the special file using the specified mode (default a=rw) TYPEs include: b: Make a block (buffered) device. c or u: Make a character (un-buffered) device. p: Make a named pipe. MAJOR and MINOR are ignored for named pipes. Enabling core dumps to /media/mmc1/core-dumps/...done. Starting DSME... done. dsme: reading bootreason from /proc/bootreason dsme: No correct bootreason found, entering the malfunction state dsme: bootreason read ** dsme: bootreason was other than mbus, let's wait for the battery type Wait for DSME socket to appear grep: /proc/component_version: No such file or directory fopen: Bad file descriptor cal_read_block(r&d_mode): size zero, block not found? Kicker: error reading R&D mode flags, both watchdogs enabledreceived state:8 Kicker: Error initialising OMAP watchdogKicker: failed to init WDs, exiting...DSME: process '/usr/sbin/kicker' with pid 330 exited with return value: 1 DSME: process '/usr/sbin/kicker' exited and restarted with pid 340 cal_read_block(r&d_mode): size zero, block not found? Kicker: error reading R&D mode flags, both watchdogs enabledKicker: Error initialising OMAP watchdogKicker: failed to init WDs, exiting...DSME: process '/usr/sbin/kicker' with pid 340 exited with return value: 1 DSME: process '/usr/sbin/kicker' exited and restarted with pid 352 Entering state 'MALF'. cal_read_block(r&d_mode): size zero, block not found? Kicker: error reading R&D mode flags, both watchdogs enabledHouston, we have a problem, powering off... Kicker: Error initialising OMAP watchdogKicker: failed to init WDs, exiting...DSME: process '/usr/sbin/kicker' with pid 352 exited with return value: 1 DSME: process '/usr/sbin/kicker' exited and restarted with pid 364 The system is going down NOW !! Sending SIGTERM to all processes. Sending SIGKILL to all processes. [ 311.089965] System halted. grep: /proc/component_version: No such file or directory Loading WLAN module... [ 311.293212] umac: version magic '2.6.21-omap1 mod_unload ARMv6 ' should be '2.6.33-rc2-06901-gabb7438 mod_unload ARMv6 ' insmod: cannot insert `/lib/modules/current/umac.ko': Invalid module format (-1): Exec format error [ 311.337249] cx3110x: version magic '2.6.21-omap1 mod_unload ARMv6 ' should be '2.6.33-rc2-06901-gabb7438 mod_unload ARMv6 ' insmod: cannot insert `/lib/modules/current/cx3110x.ko': Invalid module format (-1): Exec format error Pushing the WLAN tuned values cal_init: dsmesock_connect failedPushing default country...cal_init failed [FAILED] cal_init: dsmesock_connect failedPushing MAC address...cal_init failed bad CAL (0,28), Using default Nokia MAC Couldn't open /sys/devices/platform/wlan-omap/cal_mac_address [FAILED] cal_init: dsmesock_connect failedPushing IQ tuned values...cal_init failed Got 0 bytes while expecting 108 [FAILED] cal_init: dsmesock_connect failedPushing TX tuned values...cal_init failed (default values)Couldn't open /sys/devices/platform/wlan-omap/cal_pa_curve_data [FAILED] Pushing TX limits...Couldn't open /sys/devices/platform/wlan-omap/cal_output_limits [FAILED] Pushing RX tuned values...Using default values Couldn't open /sys/devices/platform/wlan-omap/cal_rssi [FAILED] real 0m 0.64s user 0m 0.00s sys 0m 0.63s dsmesock_connect: Connection refused dsmesock_connect Entering state 'MALF'. Houston, we have a problem, powering off... -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
