>From 060702bca6c60dd0f63f4e82e381ae1b8b112dec Mon Sep 17 00:00:00 2001
From: Adrian Hunter <adrian.hun...@nokia.com>
Date: Tue, 5 Jan 2010 13:46:57 +0200
Subject: [PATCH] omap_hsmmc: RX51: set padconfs to pull down when powering off
eMMC
It has been discovered that, when eMMC is powered off, current
will flow from OMAP eMMC data pull-ups to the eMMC voltage supply.
Configuring pads for off-mode does not help because eMMC is
powered off independently of off-mode. Hence the pads are now
re-configured when eMMC is powered on or off.
Signed-off-by: Adrian Hunter <adrian.hun...@nokia.com>
---
arch/arm/mach-omap2/board-rx51-peripherals.c | 27 +++++++++++++++++++++++++-
arch/arm/mach-omap2/hsmmc.c | 2 +
arch/arm/mach-omap2/hsmmc.h | 2 +
arch/arm/plat-omap/include/plat/control.h | 6 +++++
arch/arm/plat-omap/include/plat/mmc.h | 1 +
drivers/mmc/host/omap_hsmmc.c | 8 +++++++
6 files changed, 45 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c
b/arch/arm/mach-omap2/board-rx51-peripherals.c
index b6318b1..4d9dbb4 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -32,6 +32,7 @@
#include <plat/gpmc.h>
#include <plat/onenand.h>
#include <plat/gpmc-smc91x.h>
+#include <plat/control.h>
#include "mux.h"
#include "hsmmc.h"
@@ -225,6 +226,29 @@ static void rx51_mmc_set_pm_constraints(struct device
*dev, int on)
#define rx51_mmc_set_pm_constraints NULL
#endif
+/*
+ * Current flows to eMMC when eMMC is off and the data lines are pulled up,
+ * so pull them down. N.B. we pull 8 lines because we are using 8 lines.
+ */
+static void rx51_mmc_2_pad_conf(struct device *dev, int slot, int power_on)
+{
+ if (power_on) {
+ /* Pull up */
+ omap_ctrl_writew( 0x118, OMAP343X_PADCONF_MMC2_CMD);
+ omap_ctrl_writel(0x1180118, OMAP343X_PADCONF_MMC2_DAT0);
+ omap_ctrl_writel(0x1180118, OMAP343X_PADCONF_MMC2_DAT2);
+ omap_ctrl_writel(0x1180118, OMAP343X_PADCONF_MMC2_DAT4);
+ omap_ctrl_writel(0x1180118, OMAP343X_PADCONF_MMC2_DAT6);
+ } else {
+ /* Pull down */
+ omap_ctrl_writew( 0x108, OMAP343X_PADCONF_MMC2_CMD);
+ omap_ctrl_writel(0x1080108, OMAP343X_PADCONF_MMC2_DAT0);
+ omap_ctrl_writel(0x1080108, OMAP343X_PADCONF_MMC2_DAT2);
+ omap_ctrl_writel(0x1080108, OMAP343X_PADCONF_MMC2_DAT4);
+ omap_ctrl_writel(0x1080108, OMAP343X_PADCONF_MMC2_DAT6);
+ }
+}
+
static struct omap2_hsmmc_info mmc[] __initdata = {
{
.name = "external",
@@ -239,12 +263,13 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
{
.name = "internal",
.mmc = 2,
- .wires = 8,
+ .wires = 8, /* See also rx51_mmc_2_pad_conf */
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.nonremovable = true,
.power_saving = true,
.set_pm_constraints = rx51_mmc_set_pm_constraints,
+ .pad_conf = rx51_mmc_2_pad_conf,
},
{} /* Terminator */
};
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 1211d15..e82b299 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -81,6 +81,8 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info
*controllers)
mmc->slots[0].switch_pin = c->gpio_cd;
mmc->slots[0].gpio_wp = c->gpio_wp;
+ mmc->slots[0].pad_conf = c->pad_conf;
+
if (c->cover_only)
mmc->slots[0].cover = 1;
diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h
index ad437f3..0960dcb 100644
--- a/arch/arm/mach-omap2/hsmmc.h
+++ b/arch/arm/mach-omap2/hsmmc.h
@@ -21,6 +21,8 @@ struct omap2_hsmmc_info {
int ocr_mask; /* temporary HACK */
/* Set/drop DVFS/PM constraints */
void (*set_pm_constraints)(struct device *dev, int on);
+ /* Pad configuation when powering on/off */
+ void (*pad_conf)(struct device *dev, int slot, int power_on);
};
#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
diff --git a/arch/arm/plat-omap/include/plat/control.h
b/arch/arm/plat-omap/include/plat/control.h
index a745d62..3dfda2b 100644
--- a/arch/arm/plat-omap/include/plat/control.h
+++ b/arch/arm/plat-omap/include/plat/control.h
@@ -183,6 +183,12 @@
#define OMAP343X_PADCONF_ETK_D14 OMAP343X_PADCONF_ETK(16)
#define OMAP343X_PADCONF_ETK_D15 OMAP343X_PADCONF_ETK(17)
+#define OMAP343X_PADCONF_MMC2_CMD (OMAP2_CONTROL_PADCONFS + 0x12A)
+#define OMAP343X_PADCONF_MMC2_DAT0 (OMAP2_CONTROL_PADCONFS + 0x12C)
+#define OMAP343X_PADCONF_MMC2_DAT2 (OMAP2_CONTROL_PADCONFS + 0x130)
+#define OMAP343X_PADCONF_MMC2_DAT4 (OMAP2_CONTROL_PADCONFS + 0x134)
+#define OMAP343X_PADCONF_MMC2_DAT6 (OMAP2_CONTROL_PADCONFS + 0x138)
+
/* 34xx GENERAL_WKUP regist offsets */
#define OMAP343X_CONTROL_WKUP_DEBOBSMUX(i) (OMAP343X_CONTROL_GENERAL_WKUP + \
0x008 + (i))
diff --git a/arch/arm/plat-omap/include/plat/mmc.h
b/arch/arm/plat-omap/include/plat/mmc.h
index c3e0c34..ca09022 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -107,6 +107,7 @@ struct omap_mmc_platform_data {
int (* get_ro)(struct device *dev, int slot);
int (*set_sleep)(struct device *dev, int slot, int sleep,
int vdd, int cardsleep);
+ void (*pad_conf)(struct device *dev, int slot, int power_on);
/* return MMC cover switch state, can be NULL if not supported.
*
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index e2f63a5..554fcb2 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -263,6 +263,8 @@ static int omap_hsmmc_1_set_power(struct device *dev, int
slot, int power_on,
* FIXME handle VMMC1A as needed ...
*/
if (power_on) {
+ if (mmc_slot(host).pad_conf)
+ mmc_slot(host).pad_conf(host->dev, host->slot_id, 1);
if (cpu_is_omap2430()) {
reg = omap_ctrl_readl(OMAP243X_CONTROL_DEVCONF1);
if ((1 << vdd) >= MMC_VDD_30_31)
@@ -302,6 +304,8 @@ static int omap_hsmmc_1_set_power(struct device *dev, int
slot, int power_on,
reg |= OMAP2_PBIASLITEVMODE0;
omap_ctrl_writel(reg, control_pbias_offset);
} else {
+ if (mmc_slot(host).pad_conf)
+ mmc_slot(host).pad_conf(host->dev, host->slot_id, 0);
reg = omap_ctrl_readl(control_pbias_offset);
reg &= ~OMAP2_PBIASLITEPWRDNZ0;
omap_ctrl_writel(reg, control_pbias_offset);
@@ -348,6 +352,8 @@ static int omap_hsmmc_23_set_power(struct device *dev, int
slot, int power_on,
* chips/cards need an interface voltage rail too.
*/
if (power_on) {
+ if (mmc_slot(host).pad_conf)
+ mmc_slot(host).pad_conf(host->dev, host->slot_id, 1);
/* Only MMC2 supports a CLKIN */
if (mmc->slots[0].internal_clock) {
u32 reg;
@@ -369,6 +375,8 @@ static int omap_hsmmc_23_set_power(struct device *dev, int
slot, int power_on,
ret = mmc_regulator_set_ocr(host->vcc, 0);
}
} else {
+ if (mmc_slot(host).pad_conf)
+ mmc_slot(host).pad_conf(host->dev, host->slot_id, 0);
if (host->vcc_aux && (ret =
regulator_is_enabled(host->vcc_aux)) > 0)
ret = regulator_disable(host->vcc_aux);
if (ret == 0)
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
