Hi Vishwanath, On Thu, 1 Apr 2010, Vishwanath BS wrote:
> DSP usage at VDD1 OPP1 and OPP2 with Smartreflex enabled and any MM > UCs running DSP codec was earlier restricted as DSP crashed. > The root cause is wrong DPLL1/DPLL2 Bypass clock at VDD1 OPP1 and OPP2. > The solution is to make sure DPLL1/DPLL2 bypass clock is always less > than maximum supported frequency for the specific OPP. > Typically these settings are to be done in bootloaders. > > All the patches have been tested on OMAP3630 ZOOM3 platform. > Comments adressed in V3: > 1. Used clk_set_rate API instead of directly writing to registers > 2. Split the patch into 2 patches. > > Vishwanath BS (4): > OMAP3: Set MPU and IVA bypass Clock Divider > OMAP3 PM: Set MPU and IVA bypass clock dividers in DVFS On what tree do these patches apply? - Paul -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
