Thara Gopinath <[email protected]> writes: > The main motivations behind this patch series are the following > 1. Making smartreflex a platform driver with omap-device layer. > 2. Separating voltage specific code from smartreflex.c and other > locations and consolidating them into voltage.c and voltage.h. > 3. Smartreflex module can have Class 1 Class 2 or Class 3 implementations > depending on the PMIC in use. Making smartreflex.c capable > of handling both the Class 2 and 3 implementaions and separating out > class specific code into a separate class driver. > 4. Remove dependencies on opp id in the smartreflex and > voltage drivers > 5. Implementating latest TI recommended register settings for > Smartreflex and Voltage processor module as well as recommended > sequences for enabling and disabling of Smartreflex and Voltage > processor modules. > 6. Implementing VP force update method of voltage scaling which is > again TI hardware recommended. > > What this patch series does not address are > 1. Separating PMIC specific portions from smartreflex and voltage code. > 2. OMAP3630 and OMP4 smartreflex support. > > This patch series is based on Kevin's PM tree origin/pm-wip-opp branch > and is dependent on the following patches not yet applied onto this branch. > > http://patchwork.kernel.org/patch/81504/ > http://patchwork.kernel.org/patch/81606/ > > This patch series has been tested on OMAP3430 SDP with basic power > management tests including the dvfs scripts.
Will get to reviewing this later this week. In the mean time, I pushed a new pm-wip-sr branch with this version of the series. Thanks, Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
