Adding a flag to determine the card detect type which can be either GPIO or NON-GPIO. MMC1 Controller of OMAP4 have NON-GPIO interrupt line from twl6030 for card detect.
Signed-off-by: Kishore Kadiyala <[email protected]> --- arch/arm/mach-omap2/board-3430sdp.c | 3 +++ arch/arm/mach-omap2/board-cm-t35.c | 2 ++ arch/arm/mach-omap2/board-devkit8000.c | 2 ++ arch/arm/mach-omap2/board-igep0020.c | 2 ++ arch/arm/mach-omap2/board-omap3beagle.c | 2 ++ arch/arm/mach-omap2/board-omap3pandora.c | 3 +++ arch/arm/mach-omap2/board-omap3touchbook.c | 2 ++ arch/arm/mach-omap2/board-rx51-peripherals.c | 2 ++ arch/arm/mach-omap2/board-zoom-peripherals.c | 2 ++ arch/arm/mach-omap2/hsmmc.h | 1 + arch/arm/plat-omap/include/plat/mmc.h | 4 ++++ 11 files changed, 25 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index f474a80..bd6f81d 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -40,6 +40,7 @@ #include <plat/control.h> #include <plat/gpmc-smc91x.h> +#include <plat/mmc.h> #include <mach/board-sdp.h> @@ -354,11 +355,13 @@ static struct omap2_hsmmc_info mmc[] = { * so the SIM card isn't used; else 4 bits. */ .wires = 8, + .cd_type = GPIO, .gpio_wp = 4, }, { .mmc = 2, .wires = 8, + .cd_type = GPIO, .gpio_wp = 7, }, {} /* Terminator */ diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index e679a2c..ddf6968 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -46,6 +46,7 @@ #include <plat/usb.h> #include <plat/display.h> #include <plat/mcspi.h> +#include <plat/mmc.h> #include <mach/hardware.h> @@ -599,6 +600,7 @@ static struct omap2_hsmmc_info mmc[] = { .mmc = 1, .wires = 4, .gpio_cd = -EINVAL, + .cd_type = GPIO, .gpio_wp = -EINVAL, }, diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 77022b5..114820f 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -45,6 +45,7 @@ #include <plat/usb.h> #include <plat/timer-gp.h> #include <plat/display.h> +#include <plat/mmc.h> #include <plat/mcspi.h> #include <linux/input/matrix_keypad.h> @@ -122,6 +123,7 @@ static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, .wires = 8, + .cd_type = GPIO, .gpio_wp = 29, }, {} /* Terminator */ diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index d55c57b..bc1957f 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -30,6 +30,7 @@ #include <plat/usb.h> #include <plat/display.h> #include <plat/onenand.h> +#include <plat/mmc.h> #include "mux.h" #include "hsmmc.h" @@ -250,6 +251,7 @@ static struct omap2_hsmmc_info mmc[] = { .mmc = 1, .wires = 4, .gpio_cd = -EINVAL, + .cd_type = GPIO, .gpio_wp = -EINVAL, }, { diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 69b154c..62d7fcb 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -44,6 +44,7 @@ #include <plat/nand.h> #include <plat/usb.h> #include <plat/timer-gp.h> +#include <plat/mmc.h> #include "mux.h" #include "hsmmc.h" @@ -184,6 +185,7 @@ static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, .wires = 8, + .cd_type = GPIO, .gpio_wp = 29, }, {} /* Terminator */ diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index db06dc9..76752bf 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -41,6 +41,7 @@ #include <plat/mcspi.h> #include <plat/usb.h> #include <plat/display.h> +#include <plat/mmc.h> #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" @@ -232,6 +233,7 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = { .mmc = 1, .wires = 4, .gpio_cd = -EINVAL, + .cd_type = GPIO, .gpio_wp = 126, .ext_clock = 0, }, @@ -239,6 +241,7 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = { .mmc = 2, .wires = 4, .gpio_cd = -EINVAL, + .cd_type = GPIO, .gpio_wp = 127, .ext_clock = 1, .transceiver = true, diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 2f5f823..83ccdcc 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -48,6 +48,7 @@ #include <plat/nand.h> #include <plat/usb.h> #include <plat/timer-gp.h> +#include <plat/mmc.h> #include "mux.h" #include "hsmmc.h" @@ -126,6 +127,7 @@ static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, .wires = 8, + .cd_type = GPIO, .gpio_wp = 29, }, {} /* Terminator */ diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index abdf321..130f745 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -32,6 +32,7 @@ #include <plat/gpmc.h> #include <plat/onenand.h> #include <plat/gpmc-smc91x.h> +#include <plat/mmc.h> #include "mux.h" #include "hsmmc.h" @@ -284,6 +285,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = { .wires = 4, .cover_only = true, .gpio_cd = 160, + .cd_type = GPIO, .gpio_wp = -EINVAL, .power_saving = true, }, diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 6b39849..f9c96e1 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -23,6 +23,7 @@ #include <plat/common.h> #include <plat/usb.h> +#include <plat/mmc.h> #include "mux.h" #include "hsmmc.h" @@ -156,6 +157,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = { .name = "external", .mmc = 1, .wires = 4, + .cd_type = GPIO, .gpio_wp = -EINVAL, .power_saving = true, }, diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h index 36f0ba8..10690b9 100644 --- a/arch/arm/mach-omap2/hsmmc.h +++ b/arch/arm/mach-omap2/hsmmc.h @@ -17,6 +17,7 @@ struct omap2_hsmmc_info { bool no_off; /* power_saving and power is not to go off */ bool vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */ int gpio_cd; /* or -EINVAL */ + bool cd_type; /* GPIO or NON_GPIO */ int gpio_wp; /* or -EINVAL */ char *name; /* or NULL for default */ struct device *dev; /* returned: pointer to mmc adapter */ diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index c835f1e..ed60c0f 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -43,6 +43,9 @@ #define OMAP_MMC_MAX_SLOTS 2 +#define NON_GPIO 0 +#define GPIO 1 + struct omap_mmc_platform_data { /* back-link to device */ struct device *dev; @@ -107,6 +110,7 @@ struct omap_mmc_platform_data { unsigned features; int switch_pin; /* gpio (card detect) */ + unsigned cd_type:1; /* GPIO or NON_GPIO */ int gpio_wp; /* gpio (write protect) */ int (*set_bus_mode)(struct device *dev, int slot, int bus_mode); -- 1.6.3.3 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
