Adrian ,
Sorry for the late response
<snip>
>
> As per my email 5/5/10, I would suggest the only change to omap_hsmmc is:
Agreed and followed the changes mostly but made some more changes on top of it.
>
<snip>
> And that the late init function is used to do the rest e.g.
> find a home for these 3 functions:
I agree just having the 3 functions makes it work.
>
> static int omap4_twl6030_hsmmc_late_init(struct device *dev)
> {
> int ret = 0;
> struct platform_device *pdev = container_of(dev,
> struct platform_device, dev);
> struct omap_mmc_platform_data *pdata = dev->platform_data;
>
> /* MMC1 Card detect Configuration */
> if (pdev->id == 0) {
> ret = omap4_hsmmc1_card_detect_config();
> if (ret < 0)
> pr_err("Unable to configure Card detect for MMC1\n");
> pdata->slots[0].card_detect = twl6030_mmc_card_detect;
> pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE +
> MMCDETECT_INTR_OFFSET;
> }
> return ret;
<snip>
Few Comments below:
1) In the above function, initializing "card_detect" in the driver as
done in omap_hsmmc_gpio_init might be more readable and this has been
done in nongpio_init instead.
Even having initialization of "card_detect_irq" inside nongpio_init is fine.
2)Also calling omap_hsmmc_gpio_init in case of a card detect line
which is not GPIO
doesn't make sense though it assigns -EINVAL to switch_pin in case of
invalid GPIO
which is intended for a non-removable card .
3) And also having some thing like GPIO and NON_GPIO flag to
distinguish might make sense.
Regards,
Kishore
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
