Hi Jacob,
few style comments only
On Wed, Aug 11, 2010 at 06:31:34PM +0200, ext Jacob Tanenbaum wrote:
Adding LogicPD OMAP3 board support
Adding support for LogicPD's OMAP 3530 LV SOM and
OMAP 35x Torpedo board.
Tested against: linux-next 81e09f50c93edff607259cbe374a3006c9c5fa74
Signed-off-by: Jacob Tanenbaum <[email protected]>
don't tab here. Please remove.
+static int omap3logic_twl_gpio_setup(struct device *dev,
+ unsigned gpio, unsigned ngpio)
+{
+ return 0;
+}
no gpio setup ?? If you truly don't need, you don't have to add this
stub function.
+static struct twl4030_gpio_platform_data omap3logic_gpio_data = {
+ .gpio_base = OMAP_MAX_GPIO_LINES,
+ .irq_base = TWL4030_GPIO_IRQ_BASE,
+ .irq_end = TWL4030_GPIO_IRQ_END,
+ .use_leds = true,
+ .pullups = BIT(1),
+ .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8)
+ | BIT(13) | BIT(15) | BIT(16) | BIT(17),
+ .setup = omap3logic_twl_gpio_setup,
+};
+
+static struct twl4030_platform_data omap3logic_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+
+ /* platform_data for children goes here */
+ .gpio = &omap3logic_gpio_data,
no USB on this board ?
+static struct omap_board_config_kernel omap3logic_config[] __initdata = {
+};
just don't assign anything ?
+static void __init omap3logic_init_irq(void)
+{
+ omap_board_config = omap3logic_config;
+ omap_board_config_size = ARRAY_SIZE(omap3logic_config);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
+ omap_init_irq();
+#ifdef CONFIG_OMAP_32K_TIMER
+ omap2_gp_clockevent_set_gptimer(12);
+#endif
+ omap_gpio_init();
+}
+
+
+
one blank line only
+static void __init omap3logic_init(void)
+{
+ omap3logic_i2c_init();
+ omap_serial_init();
+
+ /* Ensure SDRC pins are mux'd for self-refresh */
+/* omap_cfg_reg(H16_34XX_SDRC_CKE0);
+ omap_cfg_reg(H17_34XX_SDRC_CKE1);
+ omap_cfg_reg(SDRC_CKE0);
+ omap_cfg_reg(SDRC_CKE1); */
remove this commented code if it's not used yet.
+#ifdef CONFIG_MACH_OMAP3_TORPEDO
no need to wrap on this ifdef, please remove.
+#ifdef CONFIG_MACH_OMAP3530_LV_SOM
neither this.
--
balbi
DefectiveByDesign.org
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
